Select Category
Electrical
Seadog Plastic 12V Spot & Flood Light Second Control Station Hard Wired Remote - 405691-1 - 354-4056911F1
Wireless 2nd station remote for spot/flood lights. Require 12 volt connection. These controls are 12 volt and hard wired remotes.
Seadog Led Surface Mount Courtesy Light, White - 401405-1 - 354-4014051F1
Stamped 304/Plastic. These lights feature 3 low amperage, long life warm white LEDs. IP65 waterproof rating. Requires #10 FH fasteners.
Seadog Led Surface Mount Courtesy Light, Blue - 401409-1 - 354-4014091F1
Stamped 304/Plastic. These lights feature 3 low amperage, long life blue LEDs. IP65 waterproof rating. Requires #10 FH fasteners.
Seadog Led Surface Mount Courtesy Edge Light, White - 401375-1 - 354-4013751F1
360° LED Surface Mount Courtesy Edge Lights are constructed of stamped 304 stainless steel and lightweight plastic for corrosion resistance. Utilizing three blue or warm white LEDs that draws very low amperage and have a very long life. Installs with two #10 FH fasteners (not included). IP65 water resistant rating.
Seadog Led Surface Mount Courtesy Edge Light, Blue - 401379-1 - 354-4013791F1
360° LED Surface Mount Courtesy Edge Lights are constructed of stamped 304 stainless steel and lightweight plastic for corrosion resistance. Utilizing three blue or warm white LEDs that draws very low amperage and have a very long life. Installs with two #10 FH fasteners (not included). IP65 water resistant rating.
Seadog Led Snap-In Courtesy Light With Aluminum Bezel - 401354-1 - 354-4013541F1
LED Snap-In Courtesy Light is recess mounted in a 1" diameter hole, requiring no installation fasteners. Features a contemporary aluminum bezel. Utilizing one blue or white LED that draws very low amperage to keep power consumption to less than 1 watt. IP67 waterproof rating.
Seadog Led Snap-In Courtesy Light With Aluminum Bezel - 401350-1 - 354-4013501F1
LED Snap-In Courtesy Light is recess mounted in a 1" diameter hole, requiring no installation fasteners. Features a contemporary aluminum bezel. Utilizing one blue or white LED that draws very low amperage to keep power consumption to less than 1 watt. IP67 waterproof rating.
Seadog Led Day/Night Dome Light, 5" - 400353-1 - 354-4003531F1
These LED Day/Night Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with integral on/off/on toggle switch and two separate light circuits. One circuit uses a clear bulb and the other circuit uses a red night vision bulb. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 15 white and 5 red LEDs per light. Surface mounts with three #6 RH fasteners (not included).
Seadog Led 12V Stud Mount Hand Rail | (6) Blue Led'S | Formed 304 Stainless | 5/16" Fastener - 254512-1 - 354-2545121F1
LED Stud Mount Hand Rails have six blue LED's in each mounting base piece and are shipped as three pieces - one handrail and two bases. 12 volt DC. Formed 304 stainless.
Seadog Led 12V Stud Mount Hand Rail | (6) Blue Led'S | Formed 304 Stainless | 5/16" Fastener - 254509-1 - 354-2545091F1
LED Stud Mount Hand Rails have six blue LED's in each mounting base piece and are shipped as three pieces - one handrail and two bases. 12 volt DC. Formed 304 stainless.
Seadog Led 12V Dc Telescopic All Around Light | Uscg 2 Nm Approved | #8 Fastener - 400016-1 - 354-4000161F1
LED Removable Telescopic 360° All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. 12VDC. Low amp draw. Installs with three #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog Horizontal Mount Side Lights, 1 Pr. - 400165-1 - 354-4001651F1
Constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with six #4 RH fasteners (not included).
Seadog Double Pole Double Throw 8 Terminal Blade Light Tip 12V 15 Amp Toggle Switch - 420128-1 - 354-4201281F1
Light Tip Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Toggle bat features a lighted tip which is white in the OFF position and red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. Easy installation. 15A @ 12VDC.
Seadog Buss Bar Stud Terminal, 250A - 426738-1 - 354-4267381F1
These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it useful for consolidating multiple wires or feeding multiple circuits. Constructed of tin plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included).
Seadog Buss Bar Stud Terminal, 150A - 426728-1 - 354-4267281F1
These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it useful for consolidating multiple wires or feeding multiple circuits. Constructed of tin plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included).
Seadog Buss Bar Stud Terminal, 100A - 426718-1 - 354-4267181F1
These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it useful for consolidating multiple wires or feeding multiple circuits. Constructed of tin plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included).
Seadog Bilge Water Alarm Panel W/Pump Switch - 423035-1 - 354-4230351F1
Provides an audible and visual means of warning if the water level in your bilge is beyond your bilge pump float switch level. There is no need for a separate bilge pump switch as the control switch selects between automatic and manual (momentary on) function of the bilge pump. Rated at 15 Amps.Not for use with pumps that have built-in switches.
Seadog Berth Light - 400400-1 - 354-4004001F1
This Birth Light is constructed of machined and stamped brass and a lacquer coating to prevent tarnish with solid brass knurled adjusting knobs. The interior surface of the lamp shade is white enamel to reflect more light. Prewired with integral on/off switch. Includes a 15-watt DC double contact bayonet style bulb. Can be converted to LED with bayonet bulb socket adapter (442042-1) BA150 style base and G4 bulb (sold separately). Designed for bulkhead or wall mounting. Installs with three #6 RH fasteners (not included). 12VDC.
Seadog All Around Light - 400020-1 - 354-4000201F1
Injection molded polycarbonate/stamped stainless steel. Fastener #6 RH.
Seadog 4451881 Fuse Block W/Negative Buss & Led Indicator Lights, 12-Terminals - 445188-1 - 354-4451881F1
Red LED lights indicate when fuse is blown or missingUses ATO/ATC & ATM fuses 1A-30AMain line terminal rating is 100A 32VDC max, with M5 metric threaded studsSingle line terminal rating is 30A 32VD, with M4 metric threaded studsTerminals are nickel plated copper with stainless steel screwsIncludes fuse block cover and 71 labelsInstalls with four #8 FH fasteners (not included)
Seadog 4429471 Led G4 Base Wafer Bulb, Vertical Pins - 442947-1 - 354-4429471F1
These G4 lamps feature 12 high quality LEDs that produce 200 lumens. Bi-pin base for easy plug and play installation. Mounted on one side of the disc, these LEDs offer direct 120° illumination with no wasted light. The equivalent of a 20-watt halogen bulb with an energy efficient 2.4-watt power consumption. Rated for 50,000 life hours. For use with 12VDC systems only. Nickel plated brass/plastic.
Seadog 4429421 Led G4 Base Wafer Bulb, Horizontal Pins - 442942-1 - 354-4429421F1
These G4 lamps feature 12 high quality LEDs that produce 200 lumens. Bi-pin base for easy plug and play installation. Mounted on one side of the disc, these LEDs offer direct 120° illumination with no wasted light. The equivalent of a 20-watt halogen bulb with an energy efficient 2.4-watt power consumption. Rated for 50,000 life hours. For use with 12VDC systems only. Nickel plated brass/plastic.
Seadog 4426431 Led G4 Base Bulb - 442643-1 - 354-4426431F1
These Warm White LED G4 Base Bulbs features a bi-pin base with 18 high quality LEDs that produce 290 lumens. The equivalent of a 20W halogen bulb with an energy efficient 3W power consumption. These bulbs boast 360° omnidirectional light distribution and 50,000 service life hours. For use with 12VDC systems only.
Seadog 4426421 Led G4 Base Bulb - 442642-1 - 354-4426421F1
These Warm White LED G4 Base Bulbs features a bi-pin base with 13 high quality LEDs that produce 225 lumens. The equivalent of a 15W halogen bulb with an energy efficient 2W power consumption. These bulbs boast 360° omnidirectional light distribution and 50,000 service life hours. For use with 12VDC systems only.
Seadog 442444 Nickel Plated Brass 12 Led White Lights 12.8V 1 Watt All Around Festoon - 442444-1 - 354-4424441F1
Nickel Plated Brass. 12V, 80 mA. All Around LED Festoon is for interior installations only.
