Select Category
Electrical
Seachoice Deck Connector With Brass Double Contacts - 50-10161 - 50-10161F1
Brass double contacts supplied complete with black plastic threaded knurled cap and chain. Insures positive watertight fitting. Fasten with #6 screws. Flange diameter 1-1/2". Overall length: 2-3/4". 3A @ 12V.
Seachoice Corrosion-Resistant Stainless Steel Side Light, Boat Navigation, Flush Mount - 50-05151 - 50-05151F1
These dependable Seachoice Side Lights provide required illumination and feature bright, corrosion-resistant Stainless Steel housings that will withstand the rigors of marine environments and maintain their bright, appealing finish. There are two lights, one with a red lens and one with a green lens. They provide 112° illumination and are designed to provide visibility for 2 nautical miles. These Side Lights' bright-finish Stainless Steel housings mount flush with the side of the boat. For convenience, the bulbs can be changed from inside the boat. These Side Lights meet USCG requirements for 2NM, meet USCG requirements for navigation lights, meet ABYC A-16 requirements, and are accepted by the NMMA. Each light's base is 7-¾ inches x 2-3/8 inches, and each is 2-½ inches high. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Reliably provide required illumination and feature bright, corrosion-resistant Stainless Steel housingsIncludes two lights, one for port side (red lens) and one for starboard (green)Appealing Stainless Steel housings mount flush on side of boatConveniently, light bulbs can be changed from inside boatLights provide 112° illumination and are designed to provide visibility for 2 nautical milesThese lights meet USCG requirements for 2NM, meet USCG requirements for navigation lights, meet ABYC A-16 requirements, are accepted by the NMMAEach light's base is 7-¾ inches x 2-3/8 inches, height is 2-½ inches
Seachoice Clear Protective Boot For Push To Reset Circuit Breakers, Pack Of 2 - 12371 - 50-12371F1
Seachoice Clear Protective Boots for Push to Reset Circuit Breakers provide added protection from the elements. This clear protective boot resists cracking and discoloration. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Provide added protection from the elements for push to reset breakersClear protective bootNon-corrosive construction is ideal for marine applicationsResist cracking and discoloration2 boots are includedManufacturer part number 50-12371
Seachoice Clamp Style Universal Battery Terminals (Set Of 2) - 13721 - 50-13721F1
Fits positive or negative posts. Made from 100% recycled lead. Clamp holds cable or strap. Removable plate for easy assembly Threaded clamp avoids pull-out.
Seachoice Circuit Tester, 6V Or 12V, Includes 8-Inch Wire W/ Alligator Clips - 15041 - 50-15041F1
The Seachoice Circuit Tester for 6V or 12V systems is used to locate grounds, shorts, and open circuits for many low-voltage applications such as boats, trailers, and cars. Included is a 8-inch wire with alligator clips. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Used to locate grounds, shorts, and open circuitsFor many low voltage applications, including boats, trailers, cars, and motorcyclesTest 6V or 12V systemsIncludes 8-inch wire with alligator clipsManufacturer part number 50-15041
Seachoice Circuit Breaker, Push To Reset, 5 Amp - 13091 - 50-13091F1
This thermal, push button circuit breaker is ideally suited for dash or switch panel mounting. Protecting your circuit from overcurrent situation, the design allows for easy reset. Operates continuously until tripped. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Thermal sensing circuit breaker operates until tripped and remains in the off position until resetEasy-to-use push resetMax Panel Thickness: ¼ inchSize: ½ inch x 1-3/8 inch x 1-3/16 inchAmps: 5Manufacturer part number 50-13091
Seachoice Circuit Breaker, Push To Reset, 30 Amp - 13171 - 50-13171F1
The Seachoice Push-to-Reset Circuit Breaker is a compact, single-pole circuit breaker designed to protect equipment. It uses a proven "Snap Acting" bi-metallic thermal mechanism used to interrupt the current flow. It is rated for 30 amps. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Compact, single-pole circuit breaker designed to protect equipmentCost-effective and very reliable circuit protectionProven "Snap-Acting" bi-metallic thermal mechanism used to interrupt current flowRated for 30 ampsCan be installed in panel up to 1/4 inch thickMeasures 1/2 inch wide x 1-3/8 inches long x 1-3/16 inches in depthManufacturer part number 50-13171
Seachoice Circuit Breaker, Push To Reset, 20 Amp - 13151 - 50-13151F1
This thermal, push button circuit breaker is ideally suited for dash or switch panel mounting. Protecting your circuit from overcurrent situations, the design allows for easy reset. Operates continuously until tripped. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Thermal sensing circuit breaker operates until tripped and remains in the off position until resetEasy-to-use push resetMax Panel Thickness: ¼ inchSize: ½ inch x 1-3/8 inch x 1-3/16 inchAmps: 20Manufacturer part number 50-13151
Seachoice Circuit Breaker, Push To Reset, 15 Amp - 13131 - 50-13131F1
This thermal sensing, push button circuit breaker is ideally suited for dash or switch panel mounting. Protecting your circuit from overcurrent situation, the design allows for easy reset. Operates continuously until tripped. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Thermal sensing circuit breaker operates until tripped and remains in the off position until resetEasy-to-use push resetMax Panel Thickness: ¼ inchSize: ½ inch x 1-3/8 inch x 1-3/16 inchAmps: 15Manufacturer part number 50-13131
Seachoice Circuit Breaker, Push To Reset, 10 Amp - 13111 - 50-13111F1
This thermal sensing, push button circuit breaker is ideally suited for dash or switch panel mounting. Protecting your circuit from overcurrent situation, the design allows for easy reset. Operates continuously until tripped. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Thermal sensing circuit breaker operates until tripped and remains in the off position until resetEasy-to-use push resetMax Panel Thickness: ¼ inchSize: ½ inch x 1-3/8 inch x 1-3/16 inchAmps: 10Manufacturer part number 50-13111
Seachoice Circuit Breaker, Mini, Push To Reset, 5 Amp - 13381 - 50-13381F1
This Seachoice Mini Push to Reset Circuit Breaker interrupts current flow to safeguard a circuit, and it can easily be reset with a push of the button to restore current flow. This 5-amp single-pole Circuit Breaker features a proven "Snap-Acting" bi-metallic thermal sensing mechanism used to interrupt current flow when conditions warrant. It protects an electrical circuit from potential damage caused by conditions such as excess current or short circuiting. By pushing the button, the circuit breaker is reset and electrical current flow is restored. Maximum panel thickness is ¼-In. with a 3/8-In. hole. This Circuit Breaker measures ½-In. W x 1 5/32-In. H x 7/8-In. D. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Interrupts electrical current flow to safeguard a circuit in case of overload or short circuitPush the button to reset circuit breaker and restore current flowBlack, 5-amp single-pole circuit breakerProven "Snap-Acting" bi-metallic thermal sensing mechanism to interrupt current flow½-In. W x 1 5/32-In. H x 7/8-In. DManufacturer part number 50-13381
Seachoice Circuit Breaker Bracket, Fits 20, 30, 40, Or 50 Amp Dual Stud Manual Reset Breakers - 13711 - 50-13711F1
The Seachoice Circuit Breaker Bracket allows a direct connection from the battery to the circuit breaker. Rust-free plastic and corrosion-resistant brass construction withstands marine environments. Fits Seachoice 20, 30, 40, or 50 amp dual-stud manual reset breakers. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Allows direct connection from battery to breakerRust-free plastic and corrosion-resistant brass constructionFits Seachoice #13051, #13061, #13071, or #13081 dual-stud manual reset breakersDurable and reliable; built to withstand marine environmentsMeasures 3-13/16 inches long x 1 inch wide x ½ inch tallManufacturer part number 50-13711
Seachoice Circuit Breaker - 13251 - 50-13251F1
Replacement Circuit Breaker8 Amp
Seachoice Circuit Breaker - 13241 - 50-13241F1
Replacement Circuit Breaker6 Amp
Seachoice Chrome-Plated Spare Light Base Assembly, Plug In, Waterproof Snap-On Cover - 8261 - 50-08261F1
The Seachoice Spare Light Base Assembly is an extra base assembly to keep on hand. It fits Seachoice 05591 and 05611 all-round lights. It is a plug-in type assembly with a waterproof, black rubber, snap-on cover to keep the moisture out. This base assembly also fits Perko 1330 and 1630 series lights. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Extra base assembly for Seachoice 05591 and 05611 all-round lightsPlug-in type assemblyWaterproof, black rubber, snap-on cover keeps moisture outChrome plated zamak baseresists corrosion and is pre-drilled to accommodate (3) #8 screws for easy installationAlso fits Perko 1330 and 1630 series lights
Seachoice Chartlight/Cigarette Lighter 12V - 15111 - 50-15111F1
12V. Quick connect wires. Plate Size: 2" x 1-1/2". Clearance behind dash: 2-1/4". 10A @ 12V.
Seachoice Chartlight/Cigarette Lighter 12V - 15101 - 50-15101F1
12V. Quick connect wires. Plate Size: 2" x 1-1/2". Clearance behind dash: 2-1/4". 10A @ 12V.
Seachoice Canvas Grommets With Washers, 5/16" - Rp-Mp9702Sc - 50-59876F1
Canvas Grommets With Washers
Seachoice Canvas Grommets With Washers, 3/8" - Rp-Mp9703Sc - 50-59877F1
Canvas Grommets With Washers
Seachoice Canvas Grommets With Washers, 1/4" - Rp-Mp9701Sc - 50-59874F1
Canvas Grommets With Washers
Seachoice Canvas Grommets With Washers, 1/2" - Rp-Mp9704Sc - 50-59878F1
Canvas Grommets With Washers
Seachoice Cable Ties, 8 In. Long, Mounting Design, 50 Lbs. Max Load, Uv Black, Pack Of 100 - 14171 - 50-14171F1
These Seachoice Cable Ties install quickly and easily and reliably secure items shut or hold items together. For extra versatility, they can also be mounted using #8 screws, which can further secure items in place. These UV black Cable Ties have a maximum load rating of 50 pounds, so they can be depended on in a wide variety of applications. They are 8 inches long, and are simple to use. Just wrap the Cable Tie Around whatever needs to be secured, insert the end through the lock slot and pull as tight as needed. The lock allows only one-way movement, so the Cable Tie won't back out or loosen once locked into place. The extra length can be cut off if desired. These Cable Ties are sold in packs of 100. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Install quickly and easily without tools and reliably secure items shut or hold items togetherStrong, durable UV black Cable Ties have maximum load rating of 50 poundsVersatile 8 inches long, simple to install and tighten as much as neededDependable lock allows only one-way movement, so Cable Tie won't back out or loosen once locked into placeMounting design can be further secured in place using #8 screwsOnce installed, extra length can be cut off if desiredMounting Cable Ties are sold in packs of 100Manufacturer part number 50-14171
Seachoice Cable Ties, 8 In. Long, Mounting Design, 50 Lbs. Max Load, Uv Black, Pack Of 1,000 - 14181 - 50-14181F1
These Seachoice Cable Ties install quickly and easily and reliably secure items shut or hold items together. For extra versatility, they can also be mounted using #8 screws, which can further secure items in place. These UV black Cable Ties have a maximum load rating of 50 pounds, so they can be depended on in a wide variety of applications. They are 8 inches long, and are simple to use. Just wrap the Cable Tie Around whatever needs to be secured, insert the end through the lock slot and pull as tight as needed. The lock allows only one-way movement, so the Cable Tie won't back out or loosen once locked into place. The extra length can be cut off if desired. These Cable Ties are sold in packs of 1,000. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Install quickly and easily without tools and reliably secure items shut or hold items togetherStrong, durable UV black Cable Ties have maximum load rating of 50 poundsVersatile 8 inches long, simple to install and tighten as much as neededDependable lock allows only one-way movement, so Cable Tie won't back out or loosen once locked into placeMounting design can be further secured in place using #8 screwsOnce installed, extra length can be cut off if desiredMounting Cable Ties are sold in packs of 1,000Manufacturer part number 50-14181
Seachoice Cable Ties, 8 In. Long, 50 Lbs. Max Load, Uv Black, Pack Of 100 - 14111 - 50-14111F1
Suitable for a variety of uses and applications, these black cable ties provide a secure grip and require minimal effort to close. Provides 50-pound loop tensile strength. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Cable ties provide excellent abrasion resistance and are suitable for bundling a variety of cords and wiresUV resistant to resist premature breakingColor: UV BlackMax Load: 50 poundsSize: 8 inchManufacturer part number 50-14111
Seachoice Cable Ties, 8 In. Long, 50 Lbs. Max Load, Uv Black, Pack Of 1,000 - 14121 - 50-14121F1
These Seachoice Cable Ties install quickly and easily and reliably secure items shut or hold items together. These UV black Cable Ties have a maximum load rating of 50 pounds, so they can be depended on in a wide variety of applications. They are 8 inches long, and are simple to use. Just wrap the Cable Tie Around whatever needs to be secured, insert the end through the lock slot and pull as tight as needed. The lock allows only one-way movement, so the Cable Tie won't back out or loosen once locked into place. The extra length can be cut off if desired. These standard Cable Ties are sold in packs of 1,000. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Install quickly and easily without tools and reliably secure items shut or hold items togetherStrong, durable UV black Cable Ties have maximum load rating of 50 poundsVersatile 8 inches long, simple to install and tighten as much as neededDependable lock allows only one-way movement, so Cable Tie won't back out or loosen once locked into placeOnce installed, extra length can be cut off if desiredStandard Cable Ties are sold in packs of 1,000Manufacturer part number 50-14121
