Select Category
Electrical
Sea-Dog 4441151 Agc Glass Tube Fuse, 15 Amp, 5/Card - 444115-1 - 354-4441151F1
Nickel plated brass contacts.
Sea-Dog 4441101 Agc Glass Tube Fuse, 10 Amp, 5/Card - 444110-1 - 354-4441101F1
Nickel plated brass contacts.
Sea-Dog 4441051 Agc Glass Tube Fuse, 5 Amp, 5/Card - 444105-1 - 354-4441051F1
Nickel plated brass contacts.
Sea-Dog 4441041 Agc Glass Tube Fuse, 4 Amp, 5/Card - 444104-1 - 354-4441041F1
Nickel plated brass contacts.
Sea-Dog 4441031 Agc Glass Tube Fuse, 3 Amp, 5/Card - 444103-1 - 354-4441031F1
Nickel plated brass contacts.
Sea-Dog 4441021 Agc Glass Tube Fuse, 2 Amp, 5/Card - 444102-1 - 354-4441021F1
Nickel plated brass contacts.
Sea-Dog 4441011 Agc Glass Tube Fuse, 1 Amp, 5/Card - 444101-1 - 354-4441011F1
Nickel plated brass contacts.
Sea-Dog 4440501 Agc Glass Tube Fuse, 50 Amp, 5/Card - 444050-1 - 354-4440501F1
Nickel plated brass contacts.
Sea-Dog 4299401 Multi-Function Wire Stripper & Crimper - 429940-1 - 354-4299401F1
This professional grade Multi-Function Wire Stripper & Crimper tool is three tools in one. It strips, crimps, and cuts 24-10 gauge wire with ease. Constructed of powder coated steel.
Sea-Dog 426733 Buss Bar 12 Screw Terminal Block, 7-15/16" - 426733-1 - 354-4267331F1
Buss Bar Screw-Temrinal Blocks are each equipped with a two 5/16" studs for main wire connection. Maximum: 48VDC. Installs with two #10 RH fasteners (not included).
Sea-Dog 4267241 Buss Bar 20 Screw Terminal Block, 9-1/8" - 426724-1 - 354-4267241F1
Buss Bar Screw-Temrinal Blocks are each equipped with a two 1/4" studs for main wire connection. Maximum: 48VDC. Installs with two #10 RH fasteners (not included).
Sea-Dog 4267221 Buss Bar 10 Screw Terminal Block, 6" - 426722-1 - 354-4267221F1
Buss Bar Screw-Temrinal Blocks are each equipped with a two 1/4" studs for main wire connection. Maximum: 48VDC. Installs with two #10 RH fasteners (not included). 426722 has certification by ISO, ABYC, SAE, USCG, and CE low voltage directive standards.
Sea-Dog 4266261 Terminal Block, 6 Gang - 426626-1 - 354-4266261F1
Terminal blocks are modular, insulated screw-type electrical connectors that are used to secure and/or terminate two or more wires together. Useful for connecting wiring to a ground or for connecting electrical switches and outlets to the mains. Molded Bakelite and stamped brass construction. Designed for use with tinned copper marine wire which shares the same expansion rate preventing loosening and reducing electrolytic corrosion caused by pairing two disparate metals. Installs with four RH fasteners (not included).
Sea-Dog 4266241 Terminal Block, 4 Gang - 426624-1 - 354-4266241F1
Terminal blocks are modular, insulated screw-type electrical connectors that are used to secure and/or terminate two or more wires together. Useful for connecting wiring to a ground or for connecting electrical switches and outlets to the mains. Molded Bakelite and stamped brass construction. Designed for use with tinned copper marine wire which shares the same expansion rate preventing loosening and reducing electrolytic corrosion caused by pairing two disparate metals. Installs with four RH fasteners (not included).
Sea-Dog 426503 Double Usb Power Socket W/O Light - 426503 - 354-426503F1
This Double USB Power Socket has no LED indicator light so it will not drain the battery when not in use. Capable of charging two devices simultaneously. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Protective dust cap extends the life of the charger. Constructed of injection molded nylon with terminal spade contacts. Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires.
Sea-Dog 4261641 Polarized Molded Electrical Connector, 4-Pin - 426164-1 - 354-4261641F1
Constructed of a molded Bakelite and neoprene body with machined brass polarized pins. Pins are sized differently, ensuring only one way to connect the plug and avoiding reverse polarity issues.
Sea-Dog 4261631 Polarized Molded Electrical Connector, 3-Pin - 426163-1 - 354-4261631F1
Constructed of a molded Bakelite and neoprene body with machined brass polarized pins. Pins are sized differently, ensuring only one way to connect the plug and avoiding reverse polarity issues.
Sea-Dog 4261621 Polarized Molded Electrical Connector, 2-Pin - 426162-1 - 354-4261621F1
Constructed of a molded Bakelite and neoprene body with machined brass polarized pins. Pins are sized differently, ensuring only one way to connect the plug and avoiding reverse polarity issues.
Sea-Dog 425020 Wave Led Battery Test Rocker Switch Panel - 425020-1 - 354-4250201F1
The Wave LED Battery Test Rocker Switch Panel includes an illuminating rocker SPDT switch and bright LED display to monitor voltage of two batteries.
Sea-Dog 4248001 6-Gang Vertical Rocker Switch Breaker Panel - 424800-1 - 354-4248001F1
Fire resistant injection molded nylon w/6 illuminating switches. The Vertical 6-Gang Breaker Rocker Switch Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Additional sizes available. Individual circuit 10A max. 37A total. These fire resistant panels are suitable for use in engine room compartments. Includes a sheet of 20 preprinted decals to customize to your specific application. Constructed of injection molded nylon. Installs with six #6 RH fasteners (not included). CE compliant. 12 VDC.
Sea-Dog 4242101 Horizontal 6-Gang Rocker Switch Panel - 424210-1 - 354-4242101F1
Aluminum Horizontal Rocker Switch Panel is constructed of stamped anodized aluminum. Features six 15A 12VDC illuminated SPST On/Off rocker switches and six 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Installs with six #6 RH fasteners (not included).
Sea-Dog 4241101 6-Gang Vertical Rocker Switch Fuse Panel - 424110-1 - 354-4241101F1
Vertical 6-Gang Rocker Switch Panel is constructed of fire resistant injection molded nylon. These panels are suitable for use in engine room compartments. Features six 15A 12VDC illuminated SPST On/Off rocker switches and six fuse holders for use with standard AGC 1/4" x 1-1/4" glass style fuses. Individual circuit 10A max. 37A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Installs with six #6 RH fasteners (not included). Meets CE specifications.
Sea-Dog 4240101 4-Gang Vertical Rocker Switch Fuse Panel - 424010-1 - 354-4240101F1
Vertical 4-Gang Rocker Switch Panel is constructed of fire resistant injection molded nylon. These panels are suitable for use in engine room compartments. Features four 15A 12VDC illuminated SPST On/Off rocker switches and four fuse holders for use with standard AGC 1/4" x 1-1/4" glass style fuses. Individual circuit 10A max. 37A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Installs with four #6 RH fasteners (not included). Meets CE specifications.
Sea-Dog 4230461 Splash Guard Bilge Pump Panel With Circuit Breaker - 423046-1 - 354-4230461F1
Injection molded ABS for maximum durability and corrosion resistance. Additional splash guard makes this ideal for applications where the panel front might be subjected to light spray and water. Features a three-way switch allowing both automatic and manual switching of the bilge pump. When operated in the Manual mode, a red LED light is activated, when in the Automatic mode, a green LED light is activated. A convenient back lit feature allows the words Bilge Pump" to illuminate facilitating easy location and operation. Bilge pump switch panel includes a UL listed 20 amp circuit breaker allowing quick and easy resetting of the system.
Sea-Dog 4230331 Bilge Pump Water Alarm Panel - 423033-1 - 354-4230331F1
The Bilge Water Alarm panel provides an audible and visual means of warning that water level in your bilge is beyond your bilge pump float switch level. Bilge pump should be hooked up to a switch. Rated 15 Amps. Cutout: 1-3/4" x 2-1/2".
