Select Category
Electrical
Fuse Holder Inline Weatherproof - Fs35870 - 11-Fs35870F1
Designed to accept automative style spade-terminal fuses. ATO/ATC. Bulk packed
Fuse Holder Agc/Mdl Waterproof 30A - 5061-Bss - 661-5061F1
Fuse Holder - Spade Terminal - 420504-1 - 354-4205041F1
AGC Round Fuse Holder with Flush Cap and Spade Terminal is constructed of molded Bakelite with stamped brass contacts and a flush cap. Panel mounted to provide overcurrent protection in electrical circuits. For use with standard AGC 1/4" x 1-1/4" glass style fuses. Maximum 15A @ 12VDC. Spade terminal. Fuse not included.
Fuse Holder - Fs69130 - 11-Fs69130F1
Designed to accept automative style spade-terminal fuses. ATO/ATC. Bulk packed
Fuse Holder - 420502-1 - 354-4205021F1
AGC Fuse Holder with Screw-On Cap is constructed of molded Bakelite with stamped brass contacts and a screw-on cap. Panel mounted to provide overcurrent protection in electrical circuits. For use with standard AGC 1/4" x 1-1/4" glass style fuses. Maximum 15A @ 12VDC. Solder terminal. Fuse not included.
Fuse Holder - 420501-1 - 354-4205011F1
Push in cap is made of stamped brass and molded bakelite.
Fuse Holder - 12661 - 50-12661F1
Accommodates a variety of sizes. Fuse not included.
Fuse Block Term.10 Gang Carded - M-449-Bp - 12-M449Bpf1
Solid brass busbar safely carries up to 150A. Two 1/4" -20 diameter brass stud with hex nuts. 8-32 round head screws for attaching wires. Moisture repellent thermoplastic insulator base. 2 mounting holes. Safely carries up to 150 amps.
Fuse Block Anl 250 Amp - 5005-Bss - 661-5005F1
Accepts wide range of ANL Fuse amperages for a versatile ignition protected fusing system. Tin-plated copper bus and stainless steel hardware. A 5/16" (M8) stud terminals. Insulation cover with breakouts allow cable access from all directions. Maximum rating: 32 Volts DC.
Fuse Block Agc 6 Cir. - 5018-Bss - 661-5018F1
Clear insulating cover with label recesses for standard Blue Sea System labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements and stores spare fuses. Nickel-plated metal components and copper contact clips. Rated for 32V max, 100 amps max per block, 30 amps max per circuit. Uses AGC, MDL and all other 3AG glass fuses.
Fuse Block Agc 6 Cir W/Groun - 5015-Bss - 661-5015F1
Clear insulating cover with label recesses for standard Blue Sea System labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements and stores spare fuses. Nickel-plated metal components and copper contact clips. Rated for 32V max, 100 amps max per block, 30 amps max per circuit. Uses AGC, MDL and all other 3AG glass fuses.
Fuse Block 4 Gang - Fs40550-1 - 11-Fs405501F1
Use with SFE, AGC, or MDL fuses up to 20 AmpCommon bus bar connects hot side of fuses for power feedSeparate bus bar for ground or unfused common hot feedBrass fuse clips, 8-32 stud terminals
Fuse Assy-90 Amp Ss<88-79023A91 - 8M0207795 - 710-88-8M0207795F1
Fuse Assy 55 Amp Ss< 79023A56 - 79023T56 - 710-88-79023T56F1
Fuse Anl 80 Amp - 5124-Bss - 661-5124F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 750 Amp - 5163-Bss - 661-5163F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 600 Amp - 5161-Bss - 661-5161F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 60 Amp - 5123-Bss - 661-5123F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 500 Amp - 5137-Bss - 661-5137F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
