Select Category
Electrical
Connector Butths 12-10 Pmg - 6000-C - 845-06000Cf1
Complete Trailer Wiring Kit - 2089736 - 23-76217F1
(1) Receptical and harness, 4 ft. (1.2 m) (1) Plug and harness, 25 ft. (7.6m)
Compact Bracket Mt. Led Spreader Light - 41435P - 390-41435Pf1
This compact design features a composite housing with intense LED illumination. Scandvik has engineered a compact LED spreader with bracket or flush mount options. No exposed mounting screws with the flush mount design. Simply snap the white trim ring into place once installation is complete. The smaller housing will offer more opportunities for smaller boats and T-tops. Two 5 watt CREE 3535 LEDs provide an ultimate beam pattern to illuminate your boat's exterior. Say Good-Bye to powder coat paint failures with Scandvik's innovative design. The exterior is made from a heat and UV resistant composite material. LEDs rated 50,000 hours. Rated IP68 - Withstand Harsh Marine Environments0.7 Amp Draw at 12 VDCCool White LED Color (5,500K - 6,300K)Stainless Steel Mounting Bracket
Compact Battery Switch No Lock - 8511Dp - 9-8511Dpf1
Compact, medium duty. Requires 1/3 less space to mount with the same bolt pattern as the standard size. Popular 90° easy-to-identify position rotation. For use with 12, 24, and 32 volt systems. Higher capacity - 315 continuous, and 450 intermittent. Smooth, positive position selector. UL listed Std. 1107, CE.4-3/4" Diameter, 1-7/8" Deep
Combination Gas Fill & Tank Vent W/Angled Neck - 0540G00Chr - 9-0540G00Chrf1
Angled neck. Chrome plated bronze cap. Black plastic body. Stainless steel beaded chain. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.
Combination Gas Fill & Tank Vent W/Angled Neck - 0540Dpgchr - 9-0540Dpgchrf1
Angled neck. Chrome plated bronze cap. Black plastic body. Stainless steel beaded chain. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.
Combination Bow Light Ss - 400150-1 - 354-4001501F1
Round Combination Bow Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with three #4 RH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Combination Bow Light - 400157-1 - 354-4001571F1
Low Profile Combination Bow Light is constructed of die cast chrome zinc. For replacement of existing lighting (not for new construction). Installs with two #10 FH fasteners (not included). Lens can be reversed for under mounting. Recommended for use in fresh water applications. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Combination Bow Light - 400155-1 - 354-4001551F1
Combination Bow Light is constructed of die cast chrome zinc. For replacement of existing lighting (not for new construction). Installs with two #10 FH fasteners (not included). Recommended for use in fresh water applications. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Comb Masthead/All-Round Light - 1125Dp4Chr - 9-1125Dp4Chrf1
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 3-mile visibility. Black plastic and chrome plated zinc alloy top, chrome plated brass base (3-3/8" x 2-1/4") with waterproof cover. Stowaway plug-in type with 3/4" diameter anodized aluminum tube & gold plated contacts. Deck mount. Clear lenses. 12V bulbs included. Screw size is 8.
Coleman-Mach 8330A763 Air Distribution Box For Lateral Ducted System, Cool Only, Manual Control Ducted - 8330A763 - 588-8330A763F1
Cole Hersee Pl6Gbp 12V Pilot Light, Green Led - Pl-612-G-Bp - 12-Pl612Gbpf1
12V DC Solid-state LED never needs replacementBright chrome-plated body, bezel, washer and hexnutQuick connect 0.25" terminalsBody length: 1.248", max. bezel dia. 0.63"Mounting hole: 0.55" dia. Fits in panels 0.02"-0.3" thick
Cole Hersee Pl6Bbp 12V Pilot Light, Blue Led - Pl-612-B-Bp - 12-Pl612Bbpf1
12V DC Solid-state LED never needs replacement 12V DC Solid-state LED never needs replacementBright chrome-plated body, bezel, washer and hexnutQuick connect 0.25" terminalsBody length: 1.248", max. bezel dia. 0.63"Mounting hole: 0.55" dia. Fits in panels 0.02"-0.3" thick
Cole Hersee Pl6Abp 12V Pilot Light, Amber Led - Pl-612-A-Bp - 12-Pl612Abpf1
12V DC Solid-state LED never needs replacementBright chrome-plated body, bezel, washer and hexnutQuick connect 0.25" terminalsBody length: 1.248", max. bezel dia. 0.63"Mounting hole: 0.55" dia. Fits in panels 0.02"-0.3" thick
Cole Hersee Mahcbp Maxi®_Mah Series In-Line Blade Fuse Holder - Mahc-Bp - 12-Mahcbpf1
32V In-Line blade fuse holder compatible with MAXI® blade-style fuses up to 60amps (sold separately). Center body hole enables easy mounting to a bulkhead. Heat-resistant thermoplastic housing and tethered fuse holder cover protects an installed MAXI® blade-style fuse up to 60 amps.
Cole Hersee M532Bp Off-On-On Push-Pull 3 Circuit - M-532-Bp - 12-M532Bpf1
2 circuits. Normally off. 3 positions: Off - On #1 & #2 - On #1 & #3. Knob face dia.: 3/4". Especially suited for multiple lighting circuits such as cabin, anchor and running lights. Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Carded.
Cole Hersee M531Bp 2 Circuit Push Pull Switch - M-531-Bp - 12-M531Bpf1
2 circuit. Normally off. 3 positions: Off - On #1 - On #2. Knob face dia: 3/4". Face nut, washer and hexnut. Permits two circuits (i.e., anchor and running lights) to be operated independently with one switch. Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Boxed.
