Combination Gas Fill & Tank Vent W/Angled Neck - 0540Dpgchr - 9-0540Dpgchrf1

Angled neck. Chrome plated bronze cap. Black plastic body. Stainless steel beaded chain. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.

Combination Bow Light Ss - 400150-1 - 354-4001501F1

Round Combination Bow Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with three #4 RH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

Combination Bow Light - 400157-1 - 354-4001571F1

Low Profile Combination Bow Light is constructed of die cast chrome zinc. For replacement of existing lighting (not for new construction). Installs with two #10 FH fasteners (not included). Lens can be reversed for under mounting. Recommended for use in fresh water applications. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

Combination Bow Light - 400155-1 - 354-4001551F1

Combination Bow Light is constructed of die cast chrome zinc. For replacement of existing lighting (not for new construction). Installs with two #10 FH fasteners (not included). Recommended for use in fresh water applications. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

Comb Masthead/All-Round Light - 1125Dp4Chr - 9-1125Dp4Chrf1

USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 3-mile visibility. Black plastic and chrome plated zinc alloy top, chrome plated brass base (3-3/8" x 2-1/4") with waterproof cover. Stowaway plug-in type with 3/4" diameter anodized aluminum tube & gold plated contacts. Deck mount. Clear lenses. 12V bulbs included. Screw size is 8.

Coleman-Mach 8330A763 Air Distribution Box For Lateral Ducted System, Cool Only, Manual Control Ducted - 8330A763 - 588-8330A763F1

Cole Hersee Pl6Gbp 12V Pilot Light, Green Led - Pl-612-G-Bp - 12-Pl612Gbpf1

12V DC Solid-state LED never needs replacementBright chrome-plated body, bezel, washer and hexnutQuick connect 0.25" terminalsBody length: 1.248", max. bezel dia. 0.63"Mounting hole: 0.55" dia. Fits in panels 0.02"-0.3" thick

Cole Hersee Pl6Bbp 12V Pilot Light, Blue Led - Pl-612-B-Bp - 12-Pl612Bbpf1

12V DC Solid-state LED never needs replacement 12V DC Solid-state LED never needs replacementBright chrome-plated body, bezel, washer and hexnutQuick connect 0.25" terminalsBody length: 1.248", max. bezel dia. 0.63"Mounting hole: 0.55" dia. Fits in panels 0.02"-0.3" thick

Cole Hersee Pl6Abp 12V Pilot Light, Amber Led - Pl-612-A-Bp - 12-Pl612Abpf1

12V DC Solid-state LED never needs replacementBright chrome-plated body, bezel, washer and hexnutQuick connect 0.25" terminalsBody length: 1.248", max. bezel dia. 0.63"Mounting hole: 0.55" dia. Fits in panels 0.02"-0.3" thick

Cole Hersee Mahcbp Maxi®_Mah Series In-Line Blade Fuse Holder - Mahc-Bp - 12-Mahcbpf1

32V In-Line blade fuse holder compatible with MAXI® blade-style fuses up to 60amps (sold separately). Center body hole enables easy mounting to a bulkhead. Heat-resistant thermoplastic housing and tethered fuse holder cover protects an installed MAXI® blade-style fuse up to 60 amps.

Cole Hersee M532Bp Off-On-On Push-Pull 3 Circuit - M-532-Bp - 12-M532Bpf1

2 circuits. Normally off. 3 positions: Off - On #1 & #2 - On #1 & #3. Knob face dia.: 3/4". Especially suited for multiple lighting circuits such as cabin, anchor and running lights. Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Carded.

Cole Hersee M531Bp 2 Circuit Push Pull Switch - M-531-Bp - 12-M531Bpf1

2 circuit. Normally off. 3 positions: Off - On #1 - On #2. Knob face dia: 3/4". Face nut, washer and hexnut. Permits two circuits (i.e., anchor and running lights) to be operated independently with one switch. Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Boxed.

Cole Hersee M284Bp 6-12V Battery Disconnect Swtch - M-284-Bp - 12-M284Bpf1

Single Pole. Two positions: Off-On. Rating: 6-36V DC; 175A continuous, 1000A intermittent /175A continuous. Die cast lever. Brass case. Long stem: 3/4" -16 thread. Dia. x 1-13/32 Long. Terminals: two 3/8" dia. studs. Fits panels up to 15/16" thick.

Cole Hersee Co. 24059Bp 12V Spst 65 Amp Solenoid - 24059-Bp - 12-24059Bpf1

Continuous duty solenoid. Insulated, with steel housing. Normally open contacts, one circuit: Off/On. 85A continuous.

Cole Hersee 880028Bp St Ato Fuse Block, 12-Gang - 880028-Bp - 12-880028Bpf1

Centralize wiring into a single, convenient location and ensure the safe distribution of power throughout your application. Snap-on insulating cover (included)Screw terminationFuses sold separately32V DC maxContinuous current rating: 100AST ATO® fuse block features an integrated negative busbar and includes a sheet of circuit identification labels. LED blown fuse indicator

Cole Hersee 880027Bp St Ato Fuse Block, 6-Gang - 880027-Bp - 12-880027Bpf1

Centralize wiring into a single, convenient location and ensure the safe distribution of power throughout your application. Snap-on insulating cover (included)Screw terminationFuses sold separately32V DC maxContinuous current rating: 100AST ATO® fuse block features an integrated negative busbar and includes a sheet of circuit identification labels. LED blown fuse indicator

Cole Hersee 880026Bp Sd Mini Fuse Block, 10-Gang - 880026-Bp - 12-880026Bpf1

Centralize wiring into a single, convenient location and ensure the safe distribution of power throughout your application. Snap-on insulating cover (included)Screw terminationFuses sold separately32V DC maxContinuous current rating: 100AMINI fuse block with LED blown fuse indicator

Cole Hersee 880025Bp Sd Mini Fuse Block, 6-Gang - 880025-Bp - 12-880025Bpf1

Centralize wiring into a single, convenient location and ensure the safe distribution of power throughout your application. Snap-on insulating cover (included)Screw terminationFuses sold separately32V DC maxContinuous current rating: 100AMINI fuse block with LED blown fuse indicator

Cole Hersee 880024Bp Sd Mini Fuse Block, 4-Gang - 880024-Bp - 12-880024Bpf1

Centralize wiring into a single, convenient location and ensure the safe distribution of power throughout your application. Snap-on insulating cover (included)Screw terminationFuses sold separately32V DC maxContinuous current rating: 100AMINI fuse block with LED blown fuse indicator

Cole Hersee 880023Bp Sd Ato Fuse Block, 10-Gang - 880023-Bp - 12-880023Bpf1

Centralize wiring into a single, convenient location and ensure the safe distribution of power throughout your application. Snap-on insulating cover (included)Screw terminationFuses sold separately32V DC maxContinuous current rating: 100A

Cole Hersee 880022Bp Sd Ato Fuse Block, 6-Gang - 880022-Bp - 12-880022Bpf1

Centralize wiring into a single, convenient location and ensure the safe distribution of power throughout your application. Snap-on insulating cover (included)Screw terminationFuses sold separately32V DC maxContinuous current rating: 100A

Cole Hersee 880021Bp Sd Ato Fuse Block, 4-Gang - 880021-Bp - 12-880021Bpf1

Centralize wiring into a single, convenient location and ensure the safe distribution of power throughout your application. Snap-on insulating cover (included)Screw terminationFuses sold separately32V DC maxContinuous current rating: 100A

Cole Hersee 58328103Bp Led-Enabled Rocker Switch, On/Off/On - 58328-103-Bp - 12-58328103Bpf1

24V Rocker Switch with Colored Pilot Lights. Designed for universal applications within harsh environments. Mounting, body, and actuator features are designed for ease-of-use and extended product lifecycle. Single-actuator switch commonly used for in-cabin controls. Snap-in mounting to fit panels .060" through .250" (1.5mm to 6.4mm). Fits standard panel hole .83" x 1.45" (21.1 x 36.8mm).

Cole Hersee 5832706Bp Weather Resistant Rocker Switch W/Dependent Pilot Lights, On/Off/On, Spdt - 58327-06-Bp - 12-5832706Bpf1

Sealed switch with Red pilot lights. Illuminates when switch is ON. Black plastic housing, bezel and actuator. Gasket sealed housing. Snap-in standard rocker switch mounting holes. Silver contacts. Brass screw and blade terminals. 25 amps at 12V DC. Fits panels .093" to .187" thick.

Cole Hersee 5832701Bp Weather Resistant Rocker Switch W/Dependent Pilot Lights, On/Off, Spst - 58327-01-Bp - 12-5832701Bpf1

Sealed switch with Red pilot lights. Illuminates when switch is ON. Black plastic housing, bezel and actuator. Gasket sealed housing. Snap-in standard rocker switch mounting holes. Silver contacts. Brass screw and blade terminals. 25 amps at 12V DC. Fits panels .093" to .187" thick.