Taco Metals F16-0810-1 "Come On Board" Boarding Angled Handle - F16-0810-1 - 236-F1608101F1

TACO Marine's boarding handle is ideal for boats on the water where constant boarding is necessary with a large grabbing surface for comfort grip. The finger molded handle pipe design assures a more secure and comfortable grip. A two piece fixed mount design for easy storage. Packaged in mesh bag for easy drying if stored wet and to avoid scratching deck or storage surfaces on the boat. Stainless Steel Type-304Unique finger molded groove handle design for comfort grip1-1/2" Diameter tube fits into standard 1-5/8" rod holdersMultiple piece design for easy storage

Taco Gs960 Grand Slam 960 Electric Masthead Anchor Light, 3-Nm, 40.43" - Gs-960 - 236-Gs960F1

The oblong design accommodates a longer, more powerful motor for excellent performance at sea. Suitable for powered vessels up to 39' (12 meters). This is a fully electric unit with a hidden base wire inside the hardtop, which easily installs to the top's surface. The GS-960 lights run on 12 volts and consists of four 3-watt LED Cree chips driven by two Mean Well drivers. Certified for USCG-required 3-NMIncludes heavy-duty anodized aluminum tube, light and 6" lead of 20-gauge wire from the base5-Watt Stern Light and 10-watt AnchorLow-draw, 0.6 amps per lightElectronic Control Module includes a 5A fuse for device protectionComes with a 12" wire lead and water-sealed Deutsch connector, using 18-gauge wire from the baseOperates on 12-volt DC for lift and descentNo under-mount clearance neededSmooth lift and descentHigh-torque, anti-backlash ball-bearing motorIntegrated nylon knob on the stainless-steel breakaway pin allows for manual operation1-year limited warranty

Taco Gs9001 Grand Slam 900 Masthead Anchor Light, 39-1/2" - Gs-900-1 - 236-Gs9001F1

Safe, no-hassle raising and lowering of an masthead anchor light Ideal for boats 39' in length or shorterCertified USCG for 3 NMStandard 1"-14 thread (male) shaftIncludes 32.75" of tube that can be cut to lengthFour 3-watt LED Cree chipsWater-resistance IP66 ratingMachined / Anodized aluminum body with a light brushed finishPolished Type-316L stainless steel crank handleFolding crank handle locks flush into baseMounts through up to 2" thick hardtopsIncludes 4" x 1/4" round backing plate

Taco Gs90 Grand Slam 900 Electric Masthead Anchor Light, 39-1/4" - Gs-950 - 236-Gs950F1

With the simple push of a button, boaters can safely adjust the position of their Masthead Anchor Light from the comfort of the helm. Ideal for powered vessels 39' and under (12-meters and under), the GS-950 is certified for USCG-required 3 nautical miles. The GS-950 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses. Machined / Anodized aluminum bodyCertified for USCG-required 3-nmIncludes tube, light and 6" lead for 12-volt DC power supply for lightThreaded shaft for consistent lift and descentDelrin bearings for smooth operationRemovable pin for manual adjustmentMounts to all hardtopsFour 3-watt LED Cree chips6-Watt Stern Light and 12-watt Anchor

Taco F389960 2-9/16" Suproflex Mounted Led Navigation Light Set - F38-9960 - 236-F389960F1

Designed specifically for SuproFlex. This sleek, low-profile navigation light fits V11-9960, V11-9990 and V11-9950 (OEM only) SuproFlex profiles, meets ABYC and USCG requirements for both sail and powerboat designation and has a water-resistant IP68 rating for hours of maintenance-free use. Ideal for boats up to 30'Sold in pairs with one 3-watt port (red) light and one 2-watt starboard (green) lightBrightness compares to 10-watt incandescent lightEnables more deck spaceEasy to installProvides a 112.5-degree unobstructed view with less glareMeets ABYC/USCG requirements for both sail and powerboat designationLow-voltage 12-14VDCAnodized aluminum heat sink for maximum heat dissipationWater-resistant IP68 ratingUses #8 stainless steel fasteners, not included

Taco F386810B 4" Rub Rail Mounted Led Navigation Light Set - F38-6810B - 236-F386810Bf1

Sleek, low-profile lights designed to allow for cleaner, open decks with unobstructed view points. Very popular with bay boats, these easy-to-install lights meet ABYC and USCG requirements for both sail and powerboat designation, have a water-resistant IP68 rating and provide hours of maintenance-free, reliable use. Ideal for up to 30' boats and designed to fit the popular 3/4-inch insert profilesSold in pairs with one 3-watt port (red) light and one 2-watt starboard (green) lightBrightness compares to 10-watt incandescent lightEnables more deck space and easy to installProvides a 112.5° unobstructed view with less glareCertified for ABYC/USCG-approved 2 NMLow-voltage 12-14VDCAnodized aluminum heat sink for maximum heat dissipationLED lights are mounted in a heavy gauge polished stainless-steel joiner coverWater-resistant IP68 ratingRequires #8 stainless-steel fastener (not included)

T-One T-Connector Harness 4 Way Flat - 118847 - 220-118847F1

T-One Connector Repl. 119146 - 119147 - 220-119147F1

Draws power directly from the vehicle battery and uses less than 5 mA of the vehicle circuit for sensing to turn the trailer functions on and off Will work with either LED/Incandescent bulbs (vehicle & trailer)The taillight circuit has been upgraded to work with vehicles that use a pulse width modulation (PWM), this will allow the convertor to turn on fully and gives the trailer lights full brightness during activationThe trailer brakes will override the hazard lamps when the brake is activatedThe unit is rated for up to 2.1 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuitWill work with most vehicles that have a multiplex system for lightingCan be used on a 2-wire or 3-wire systemIncludes integrated protective cover

T-H Underwater Light With Stainless Steel Bezel - Led-51901-Dp - 232-Led51901Dpf1

316 Stainless Steel Bezel Six Bright LEDs - Lights Up TransomsNo High Heat - Can Be Used Above Water

T-H Underwater Light With Stainless Steel Bezel - Led-51900-Dp - 232-Led51900Dpf1

316 Stainless Steel Bezel Six Bright LEDs - Lights Up TransomsNo High Heat - Can Be Used Above Water

T-H Premium Underwater Light - Led-39062-Dp - 232-Led39062Dpf1

Six (6) High Intensity Super Bright LEDs Newest Generation in LED TechnologyStainless Steel Bezel for Beauty and DurabilitySurface Mount Installation - No Large HolesResists Rust and Corrosion3/8" Hole for Wire

T-H Premium Underwater Light - Led-39061-Dp - 232-Led39061Dpf1

Six (6) High Intensity Super Bright LEDs Newest Generation in LED TechnologyStainless Steel Bezel for Beauty and DurabilitySurface Mount Installation - No Large HolesResists Rust and Corrosion3/8" Hole for Wire

T-H Premium Underwater Light - Led-39060-Dp - 232-Led39060Dpf1

Six (6) High Intensity Super Bright LEDs Newest Generation in LED TechnologyStainless Steel Bezel for Beauty and DurabilitySurface Mount Installation - No Large HolesResists Rust and Corrosion3/8" Hole for Wire

T-H Marine Waterproof White Led Lighted Rim Drink Holder - Led-Lch-W-Dp - 232-Ledlchwdpf1

Illuminated Cup Holder Provides Soft LED Lighting 15 Super Bright LEDsRobust UV Stable Molded HousingMounts in Standard 3-5/8" HoleCorrosion Resistant 316 Stainless Steel Rim for a Sleek, Finished LookLED Light System is WaterproofIncludes Drain Hole and Nipple for Routing DrainageWired for 12V

T-H Marine Waterproof Stainless Steel Led Underwater Light - Led-Sm7815-B-Dp - 232-Ledsm7815Bf1

This surface mount, stainless steel underwater light is highly attractive, with superior brightness and durable construction. Completely waterproof, this 316 stainless steel bezel light will last for many years in the toughest marine environments. 5.7"x1.7" . Overheat ProtectionResistant to Corrosion, UV and ChemicalsFully Sealed and Waterproof Light - IP68 RatedVery Easy to Install with Two (2) Screws and Small Wiring HoleSix (6) Super Bright LED Diodes

T-H Marine Waterproof Extreme Led Underwater Light - Led-Sm173Cob-G-Dp - 232-Ledsm173Cobgdpf1

Extreme Output LED Underwater Light - Surface Mount 20% Brighter than Our Standard LED Underwater Light3.5"x1.5"High Impact Polymer ConstructionCompletely Waterproof - For Use Underwater or Above WaterPolarity and Thermal Protection

T-H Marine Waterproof Extreme Led Underwater Light - Led-Sm172Cob-B-Dp - 232-Ledsm172Cobbdpf1

Extreme Output LED Underwater Light - Surface Mount 20% Brighter than Our Standard LED Underwater Light3.5"x1.5"High Impact Polymer ConstructionCompletely Waterproof - For Use Underwater or Above WaterPolarity and Thermal Protection

T-H Marine Waterproof Extreme Led Underwater Light - Led-Sm171Cob-W-Dp - 232-Ledsm171Cobwdpf1

Extreme Output LED Underwater Light - Surface Mount 20% Brighter than Our Standard LED Underwater Light3.5"x1.5"High Impact Polymer ConstructionCompletely Waterproof - For Use Underwater or Above WaterPolarity and Thermal Protection

T-H Marine Waterproof Blue Led Lighted Rim Drink Holder - Led-Lch-Bu-Dp - 232-Ledlchbudpf1

Illuminated Cup Holder Provides Soft LED Lighting 15 Super Bright LEDsRobust UV Stable Molded HousingMounts in Standard 3-5/8" HoleCorrosion Resistant 316 Stainless Steel Rim for a Sleek, Finished LookLED Light System is WaterproofIncludes Drain Hole and Nipple for Routing DrainageWired for 12V

T-H Marine Utility/Rod Grommets (Pair), Black - Ug2Dp - 232-Ug2Dpf1

Molded of tough, flexible, vinyl. It is designed for multiple uses in boats, such as cable pass thru, landing net holder, fishing rod support or protector, stern light holder or any number of other uses. For bulk head pass-thru, simply mount and run cables, wires, etc. through to prevent chafing. For land nets, fishing rods, stern light or other items, simply mount and insert items to be protected or held in place. To remove items from utility grommet, simply pull. This utility grommet can be used either horizontal or vertical. Install with four (4) pan head screws (not furnished).

T-H Marine Utility/Rod Grommets (Pair), Black - Ug1Dp - 232-Ug1Dpf1

Molded of tough, flexible, vinyl. It is designed for multiple uses in boats, such as cable pass thru, landing net holder, fishing rod support or protector, stern light holder or any number of other uses. For bulk head pass-thru, simply mount and run cables, wires, etc. through to prevent chafing. For land nets, fishing rods, stern light or other items, simply mount and insert items to be protected or held in place. To remove items from utility grommet, simply pull. This utility grommet can be used either horizontal or vertical. Install with four (4) pan head screws (not furnished).

T-H Marine Stainless Steel Wire Mesh Strainer Fits Th1, 1Xl, 90, 92 Thru-Hulls - As2Dp - 232-As2Dpf1

Protects pumps from debris or bait fish. Formed wire mesh - molded PVC threaded base.

T-H Marine Stainless Steel Wire Mesh Strainer Fits Aerator Pump Intake - As1Dp - 232-As1Dpf1

Protects pumps from debris or bait fish. Formed wire mesh - molded PVC threaded base.

T-H Marine Shark Eye Nav Lights 1Nm (Pair) - Sel1Dp - 232-Sel1Dpf1

T-H Marine Shark Eye Nav Lights 1NM (Pair) Meets ABYC A-16 & USGC 1 NMNMMA type acceptedStainless steel baseTin wirePair: (1) Red, (1) Green

T-H Marine Mini Livewell/Courtesy Light Led-Potted, White - Lwlm1Pleddp - 232-Lwlm1Pleddpf1

T-H Marine Mini Livewell/Courtesy Light LED-Potted, White Totally waterproof, can be mounted underwaterNeoprene sealing gasket includedBright 3-element LED bulbFits 5/8" Hole