Select Category
Electrical
Anderson Over 80" Low-Profile Submersible Combo Rear Light - E456 - 177-E456F1
Low profile. Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker, side reflex and license light. Housing slides out for easy maintenance and bulb replacement while maintaining gasket seal. Grounds through separate lead wire. Mounts on slide-on 2" centers and includes mounting hardware.
Anderson Oval Stop/Turn/Tail Light Only - Red - E421R - 177-E421Rf1
May be used on both the curbside and roadside of the trailer. Polycarbonate lens is sonic welded to the housing to form a single unit. Kit includes 12V lamp, grommet, and right angle plug.
Anderson Oval Stop/Turn/Tail Light Kit - Red - E421Kr - 177-E421Krf1
May be used on both the curbside and roadside of the trailer. Polycarbonate lens is sonic welded to the housing to form a single unit. Kit includes 12V lamp, grommet, and right angle plug.
Anderson Oval Dome/Utility Light - White - V171C - 177-V171Cf1
Bright Piranha® 1-diode LED Black rubber grommet included8-16 volt operating range
Anderson Oval Combination Clearance/Side Market Light, Red - M108Wr - 177-M108Wrf1
Acrylic lens features built-in reflector which eliminates the need for a separate reflector. Mounts on 3" centers with a single lead wire and grounds through the mounting hardware.
Anderson Oval Combination Clearance/Side Market Light, Amber - M108Wa - 177-M108Waf1
Acrylic lens features built-in reflector which eliminates the need for a separate reflector. Mounts on 3" centers with a single lead wire and grounds through the mounting hardware.
Anderson Led Under 80" Wide Trailer Light Kit - V941 - 177-V941F1
Super bright LED optics. 100,000 hour rated life. Submersible - no bulb breakage. Low amp draw. Kit contains: two multi-function LED stop, turn and tail lights, license bracket, mounting and wiring hardware, and complete mounting instructions. Rear legal lighting equipment for any trailer less than 80" (2M) wide. Meets DOT requirements. Roadside light contains auxiliary license light.
Anderson Led Under 80" Wide Combination Tail Light - V840L - 177-V840Lf1
Combination LED stop, turn and tail light. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80" wide. It has solid state construction, no bulbs to break or burn out. 100,000 hour-rated life. The lights are fully sealed and submersible. Includes an integral, dedicated side marker diode. 4-3/4" overall height x 4-7/8" W x 3" D. With-out license light version has 11-diodes; with license light version has 15-diodes.
Anderson Led Under 80" Wide Combination Tail Light - V840 - 177-V840F1
Combination LED stop, turn and tail light. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80" wide. It has solid state construction, no bulbs to break or burn out. 100,000 hour-rated life. The lights are fully sealed and submersible. Includes an integral, dedicated side marker diode. 4-3/4" overall height x 4-7/8" W x 3" D. With-out license light version has 11-diodes; with license light version has 15-diodes.
Anderson Led Over 80" Wide Rear Trailer Light Kit - V947 - 177-V947F1
Submersible rear lighting kit for all trailers 80" wide and over Includes 856/856L LED tail lights plus license bracket, mounting hardware and Installation instructionsReplacement harness available separatelyProvides rear lighting and reflectors, front clearance/side marker lights, front side reflectors and rear identification lights (necessary to meet all DOT requirements)
Anderson Led Over 80" Wide Combination Tail Light, Right - V856 - 177-V856F1
Combination LED stop, turn and tail light Super bright LED optics - no bulbs to break or burn out100,000-hour-rated lifeFully sealed, submersible constructionPotted circuitry protects against moisture, corrosion and vibrationLower amp draw than incandescent lightsDesigned to directly replace 456-series incandescent lightsIntegral, dedicated side marker diodeExceeds all DOT rear lighting and rear lighting and reflex requirements for trailers 80" wide and over
Anderson Led Over 80" Wide Combination Tail Light, Left - V856L - 177-V856Lf1
Combination LED stop, turn and tail light Super bright LED optics - no bulbs to break or burn out100,000-hour-rated lifeFully sealed, submersible constructionPotted circuitry protects against moisture, corrosion and vibrationLower amp draw than incandescent lightsDesigned to directly replace 456-series incandescent lightsM856L roadside light includes license lightIntegral, dedicated side marker diodeExceeds all DOT rear lighting and rear lighting and reflex requirements for trailers 80" wide and over
Anderson Led Oval Stop Turn & Tail Light Red With Chrome Bezel - V423Xr-4 - 177-V423Xr4F1
Oval, 10-diode LED stop, turn and tail light designed for horizontal installation. Meets DOT requirements. Operates from 9-16 volts. Hard-wired design eliminates the need for separate plug and grommet. Surface mounting for quick and versatile installation. Includes decorative snap-on bezel that adds the elegance of chrome while hiding fasteners.
Anderson Led Dome/Interior Light - Chrome - V381X - 177-V381Xf1
14 high-output Great White® diodes for bright illumination for interior applications. Operating range is 9-16 volts. Mounts on 2-3/16" centers with two hardwired leads.
Anderson Led Clearance/Side Marker Light Kit With Chrome Bezel - V168Xr - 177-V168Xrf1
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 volts. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16" centers. 100,000-hour rated life. Includes chrome bezel.
Anderson Led Clearance/Side Marker Light Kit With Chrome Bezel - V168Xa - 177-V168Xaf1
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 volts. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16" centers. 100,000-hour rated life. Includes chrome bezel.
Anderson Led Clearance/Side Marker Light Kit W/Reflex - V170R - 177-V170Rf1
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9-16 volts. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal.
Anderson Led Clearance/Side Marker Light Kit W/Reflex - V170A - 177-V170Af1
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9-16 volts. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal.
Anderson Led Clearance/Side Marker Light Kit - V169Kr - 177-V169Krf1
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9-16 volts. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3" centers.
Anderson Led Clearance/Side Marker Light Kit - V169Ka - 177-V169Kaf1
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9-16 volts. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3" centers.
Anderson Led Clearance/Side Marker Light Kit - V153Kr - 177-V153Krf1
Sealed LED light that may be used as a clearance, side marker, or identification light. The lens is welded to the housing to form a single unit. Kit includes 153 LED light, mounting bracket, and plug.
Anderson Led Clearance/Side Marker Light Kit - V153Ka - 177-V153Kaf1
Sealed LED light that may be used as a clearance, side marker, or identification light. The lens is welded to the housing to form a single unit. Kit includes 153 LED light, mounting bracket, and plug.
Anderson Led Clearance/Side Marker Light - V180R - 177-V180Rf1
6-Diode, oval LED light perfect for light & medium duty applications Functions as a clearance or side maker light with built-in reflector optics.
Anderson Led Clearance/Side Marker Light - V180A - 177-V180Af1
6-Diode, oval LED light perfect for light & medium duty applications Functions as a clearance or side maker light with built-in reflector optics.
Anderson Led Clearance/Side Marker Light - Amber - V168A - 177-V168Af1
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 volts. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16" centers.
