Select Category
Electrical
Battery Terminal, Negative - 62701 - 50-62701F1
Clamp type wing nut terminal made of lead alloy. Brass plated wing nuts. 5/16" Negative stud. Fits all standard battery posts.
Battery Terminal, Positive - 62711 - 50-62711F1
Clamp type wing nut terminal made of lead alloy. Brass plated wing nuts. 3/8" Positive stud. Fits all standard battery posts.
Battery Terminal, Universal - 13730 - 50-13730F1
Converts standard battery post terminals to a marine stud connector. Allows for easy removal of connector from battery. Plated wing nuts. 3/8" Positive stud and 5/16" negative stud. Fits all standard battery posts.
Battery Tray 24M-W/Cross Bar - 2626216 - 23-90905F1
Heavy-duty, non-corrosive, black plastic. Includes adjustable-height crossbar and two retaining bolts. Meets ABYC Standard E-10 and USCG requirements. Patented design. Install with #10 screws. Contains no metal parts to corrode and no webbing straps to fade.
Battery Tray 27M-W/Cross Bar - 2626581 - 23-90915F1
Heavy-duty, non-corrosive, black plastic. Includes adjustable-height crossbar and two retaining bolts. Meets ABYC Standard E-10 and USCG requirements. Patented design. Install with #10 screws. Contains no metal parts to corrode and no webbing straps to fade.
Battery Tray W/Strap, Group 24 - 42233 - 114-042233F1
Non-corrosive high-strength polyethylene construction resists chemicals and rust. Meets Coast Guard regulations (E10).
Battery Tray W/Strap, Group 27 - 42234 - 114-042234F1
Non-corrosive high-strength polyethylene construction resists chemicals and rust. Meets Coast Guard regulations (E10).
Battery Tray-Series 24 - 42215 - 114-042215F1
Non-corrosive high-strength polyethylene construction resists chemicals and rust Meets Coast Guard regulations (E10)
Battery Tray-Series 27, 30 & 31 - 42216 - 114-042216F1
Non-corrosive high-strength polyethylene construction resists chemicals and rust Meets Coast Guard regulations (E10)
Battswitch W/Alternator Disconnect - 8503Dp - 9-8503Dpf1
Medium Duty. For use with two or more batteries and single or dual engine systems. Permits selection between batteries for starting and charging or operation of both batteries in parallel. They allow addition of an extra battery for use with accessories. The "OFF" position also acts as an emergency disconnect in the event of an electrical problem. Ignition protected. Surface mount. For use with systems under 50 volts. Capacity - 250 amps continuous, 360 amps intermittent. Alternator Field Disconnect (AFD) Models, when used with non-utilized alternators, these models will interrupt the field current (reducing the possibility of damage) if turned "OFF" with the engine running. Size: 5-1/4 dia. x 2-5/8 deep. UL Listed.
Bay Dog Ffblk Firefly Led Safety Light - Ff-Blk - 791-Ffblkf1
Compact and lightweight, and clips easily onto any collar, harness, leash, coat, lifejacket or backpack. Emits a bright, steady glow, making your dog visible from up to 1,000 feet, ensuring maximum safetySwitch between seven different colors, steady or flashingComes with two attachment options, a clip or a silicone strap100% waterproof, making it the perfect lifejacket accessory. Built to withstand rain, snow, and all kinds of weather conditions,The Firefly comes with a micro-USB charging cablePowerful battery that lasts up to 20 hours on a single charge
Bennett Es2000A Eurostyle Waterproof Rocker Switch W/20' Wire Harness For Flybridge Installation - 6Bt-50030-17 - 219-Es2000Af1
This control is ergonomically designed, water resistant and provides a positive "click" when the trim tabs are engaged. Its lock-out feature prevents user from pressing down on opposite directions at the same time. The control is easy to install, fitting into a single 2-1/2" hole.
Bennett T1127 Nylon Tube Connector Nuts & Ferrule - 6Bt-50063-82-00 - 219-T1127F1
Nylon Tube Connector Nuts & Ferrule
Bennett Vp1135G Solenoid Valve - 6Bt-50079-55-00 - 219-Vp1135Gf1
Green Solenoid Valve
Bennett Vp1135R Solenoid Valve - 6Bt-50086-74-00 - 219-Vp1135Rf1
Red Solenoid Valve
Bennett Wh1000 Wire Harness 22' - Wh1000 - 219-Wh1000 Superseded By: 219-Wh100022F1
22' Wiring Harness
Bep 1001101 Led Led Pilot Indicator Light, Amber - 1001101 - 969-1001101F1
12V DC solid-state LED diodes never need replacement. Provides easy to see indication of circuits that are active. Bright chrome-plated body, bezel, washer and hexnutQuick connect terminals are polarized for ease of wiringMounts into a 9/16" hole, fits panel thickness of 3/16" through 9/32"
Bep 1001102 Led Led Pilot Indicator Light, Blue - 1001102 - 969-1001102F1
These 12V DC solid-state LED diodes never need replacement. Provides easy to see indication of circuits that are active. Bright chrome-plated body, bezel, washer and hexnutQuick connect terminals are polarized for ease of wiringMounts into a 9/16" hole, fits panel thickness of 3/16" through 9/32"
Bep 1001103 Led Led Pilot Indicator Light, Green - 1001103 - 969-1001103F1
These 12V DC solid-state LED diodes never need replacement. Provides easy to see indication of circuits that are active. Bright chrome-plated body, bezel, washer and hexnutQuick connect terminals are polarized for ease of wiringMounts into a 9/16" hole, fits panel thickness of 3/16" through 9/32"
Bep 1001104 Led Led Pilot Indicator Light, Red - 1001104 - 969-1001104F1
These 12V DC solid-state LED diodes never need replacement. Provides easy to see indication of circuits that are active. Bright chrome-plated body, bezel, washer and hexnutQuick connect terminals are polarized for ease of wiringMounts into a 9/16" hole, fits panel thickness of 3/16" through 9/32"
Bep 1001303 Push-Pull Switch, Spst, Off/On (2 Circuit) - 1001303 - 969-1001303F1
Well suited for managing a variety of single or multiple circuit lighting applications Shock and weather resistant for use in harsh marine and industrial environmentsSuitable for 6-36V system configurations with up to 10A ratings (12V)
Bep 1001704 Rocker Switch, Off-On, Spst, 1/4" Blade Terminals - 1001704 - 969-1001704F1
Shock and weather resistant for use in harsh marine and industrial environments Standard and illuminated actuatorsSnap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick
Bep 1001707 Rocker Switch, Off-On, Spst, Screw Terminals - 1001707 - 969-1001707F1
Shock and weather resistant for use in harsh marine and industrial environmentsStandard and illuminated actuatorsSnap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick
Bep 1001708 Rocker Switch, Off-On, Spst, Screw Terminals, Illuminated Red - 1001708 - 969-1001708F1
Shock and weather resistant for use in harsh marine and industrial environmentsStandard and illuminated actuatorsSnap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick
Bep 1001709 Rocker Switch, Off-(On), Spst, 1/4" Blade Terminals - 1001709 - 969-1001709F1
Shock and weather resistant for use in harsh marine and industrial environmentsStandard and illuminated actuatorsSnap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick(On) in parenthesis indicates a momentary position
