Select Category
Electrical
Alternator Conversion Kit - 18-5953-1 - 47-59531F1
Includes new 68 AMP alternator, mounting brackets 18-5968, pulley, wiring, hardware and instructions. Converts model 470 aluminum block Mercruiser engines serial number 4625580 & up with stator charging system and water cooled voltage regulator to alternator system. NOTE: Fuse kit 18-8220 (sold separately) is required on engines with a Delco starter (round solenoid mounted to starter); Prestolite starters with remote solenoid DO NOT require fuse kit. Visually inspect starter prior to ordering conversion kit.
Alternator Kit W/Ars Regulator, Temp Sensors, Single 1/2" Pulley - 60Yp100Sv - 684-60Yp100Svf1
6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. All Smart Ready 6-Series, small case alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish. Kits include alternator, voltage regulator, battery and alternator temperature sensors, wiring harness and pulley.YP models: Fit engines using a 3.15" ID dual foot (saddle) mount for many 6.2-8.1L Mercruiser, Volvo Penta, Crusader & other large block GM gas, Yanmar, Westerbeke, Perkins diesels with Hitachi-equipped alternators.Contact Balmar Technical Support with any application questions to confirm your specific engine/alternator configuration and appropriate belt/pulley.
Alternator Kit W/Ars Regulator, Temp Sensors, Single 1/2" Pulley - 60Yp70Sv - 684-60Yp70Svf1
6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. All Smart Ready 6-Series, small case alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish. Kits include alternator, voltage regulator, battery and alternator temperature sensors, wiring harness and pulley. YP models: Fit engines using a 3.15" ID dual foot (saddle) mount for many 6.2-8.1L Mercruiser, Volvo Penta, Crusader & other large block GM gas, Yanmar, Westerbeke, Perkins diesels with Hitachi-equipped alternators.Contact Balmar Technical Support with any application questions to confirm your specific engine/alternator configuration and appropriate belt/pulley.
Alternator Kit W/Ars Regulator, Temp Sensors, Single 1/2" Pulley - 621Vup70Sv - 684-621Vup70Svf1
6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. All Smart Ready 6-Series, small case alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish. Kits include alternator, voltage regulator, battery and alternator temperature sensors, wiring harness and pulley. VUP models: Fit engines using a 1" or 2" single foot (spool) mount for many 4.3-5.7L Mercruiser, Volvo Penta, Pleasurecraft, Crusader & other GM gas, Volvo, Cummins, Yanmar 6LP, Westerbeke diesels with Delco & Motorola-equipped alternators.
Alternator Pleasurecraft - 20822 - 57-20822F1
Fits: Pleasurecraft RA097007C Replaces: Delco 840002765mm serpentine pully
Alternator Term L/Washer@5 - 21272 - 710-13-21272F1
Alternator V-6 O/B - 8M0064020 - 710-8M0064020 Superseded By: 710-8M6013461F1
Alternator V-6 O/B Ss<8M0064020 - 8M6013461 - 710-8M6013461F1
Alternator, Dual Foot (3.15"), Isogrd - 60100Sv - 684-60100Svf1
6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. All Smart Ready 6-Series, small case alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish.YP models: Fit engines using a 3.15" ID dual foot (saddle) mount for many 6.2-8.1L Mercruiser, Volvo Penta, Crusader & other large block GM gas, Yanmar, Westerbeke, Perkins diesels with Hitachi-equipped alternators.Contact Balmar Technical Support with any application questions to confirm your specific engine/alternator configuration and appropriate belt/pulley.
Alternator, Dual Foot (3.15"), Isogrd - 60120Dv - 684-60120Dvf1
6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. All Smart Ready 6-Series, small case alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish.YP models: Fit engines using a 3.15" ID dual foot (saddle) mount for many 6.2-8.1L Mercruiser, Volvo Penta, Crusader & other large block GM gas, Yanmar, Westerbeke, Perkins diesels with Hitachi-equipped alternators.Contact Balmar Technical Support with any application questions to confirm your specific engine/alternator configuration and appropriate belt/pulley.
Alternator, Dual Foot (3.15), Isogrd - 60-24-70-Dv - 684-602470Dvf1
6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. All Smart Ready 6-Series, small case alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish.YP models: Fit engines using a 3.15 ID dual foot (saddle) mount for many 6.2-8.1L Mercruiser, Volvo Penta, Crusader & other large block GM gas, Yanmar, Westerbeke, Perkins diesels with Hitachi-equipped alternators.Contact Balmar Technical Support with any application questions to confirm your specific engine/alternator configuration and appropriate belt/pulley.
Alternator, Single Foot (1"-2"), Isogrd - 621-100-Sv - 684-621100Svf1
6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. All Smart Ready 6-Series, small case alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish.VUP models: Fit engines using a 1" or 2" single foot (spool) mount for many 4.3-5.7L Mercruiser, Volvo Penta, Pleasurecraft, Crusader & other GM gas, Volvo, Cummins, Yanmar 6LP, Westerbeke diesels with Delco & Motorola-equipped alternators.
Ancor 10 Piece Assorted Heat Shrink Butt Connectors Ranging From 22 To 10 Awg - 300000 - 639-300000F1
Features the most popular 22-10 ga. heat shrink connectors.
Ancor 100010 Marine Grade® Tinned Copper Primary Wire, #18 Awg, 100', Black - 100010 - 639-100010F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 100025 Marine Grade® Tinned Copper Primary Wire, #18 Awg, 250', Black - 100025 - 639-100025F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 100050 Marine Grade® Tinned Copper Primary Wire, #18 Awg, 500', Black - 100050 - 639-100050F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 100110 Marine Grade® Tinned Copper Primary Wire, #18 Awg, 100', Dark Blue - 100110 - 639-100110F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
Ancor 100310 Marine Grade® Tinned Copper Primary Wire, #18 Awg, 100', Green - 100310 - 639-100310F1
Ancor 100410 Marine Grade® Tinned Copper Primary Wire, #18 Awg, 100', Gray - 100410 - 639-100410F1
Tinned copper stranding for maximum protection against corrosion, electrolysis and resists fatigue due to vibration and flexing. Rated at 600 volts and 105°C, the heavy duty insulation is resistant to heat and abrasion. Exceeds all UL 1426, US Coast Guard Charter Boat and ABYC standards.
