Select Category
Electrical
Outboard Starter - 5379 - 57-5379F1
For Mercury/Mariner-Fits: 50-73521, 50-73521T 40-50 HP10-tooth drive gear
Outboard Starter - 5380 - 57-5380F1
Replaces: Merc 50-79472, 50-77141, 50-44415, 50-79472-1, 5079472T2 8-tooth drive gear
Outboard Starter - 5382 - 57-5382F1
CHRYSLER/FORCE - Fits: 50-575955 35-50 HP11 tooth drive gear
Outboard Starter - 5386 - 57-5386F1
1985-Up 10 tooth drive gear
Outboard Starter - 5388 - 57-5388F1
For Mercury-Fits:50-60 HP, 3-cyl1991-1996 45 HP Jet 10-tooth drive gear
Outboard Starter - 5389 - 57-5389F1
FOR O.M.C. - Fits: 585056, 586279 1989-up 25, 40, 50, 2 cyl.1990-up 48-50 HP9 tooth drive gear
Outboard Starter - 5390 - 57-5390F1
O.M.C. - Fits: 585059, 778991 1987-1993 20-35 HP; 2-cyl9 tooth drive gear
Outboard Starter - 5393 - 57-5393F1
Replaces: Chrysler 50-F616955-1, F616955-1Force 480955, 490955, 50-819085, 50-853869, 616955, 50-853869, 50-853869T, 50-8982650029-tooth drive gear
Outboard Starter - 5394 - 57-5394F1
FORCE - Fits: 1996-1999 40-50 HP13 tooth drive gear **Determine the location of the battery stud on the starter being replaced before ordering (Battery stud on the bottom).**
Outboard Starter - 5397 - 57-5397F1
Fits: FORCE 1992-1995, 40 HP1992-1995, 50 HP13 tooth drive gear **Determine the location of the battery stud on the starter being replaced before ordering (Battery stud on the side).**
Outboard Starter - Mercury/Force - 7325 - 57-7325F1
Fits: Mercury/Force90-120 HP Sport Jet9-tooth drive gear
Outboard Starter - Sr367 - 57-Sr367F1
For Mercury/Mariner-Fits:'86-96/6-15 HP'80-'03/18-25 HP2 1/2" motor casing10-tooth drive gear
Oval 2-Pin Base For Angled Pole - 91022-7 - 23-910227F1
A Plug-In Base for Angled Locking Collar Poles. This tough, resilient 2-pin base is used for angled pole lights with locking collars. Ideal for installation in close quarters, such as narrow gunwales or deck areas. Narrow base has a soft rubber cover with a gasket to seal the socket. Contacts are nickel-plated to resist corrosion and multi-crimped for durability. Wire leads are tinned for corrosion-resistance. Base fits these pole lights. Frosted Globe: 5110 Series w/locking collar pole; Anti-glare: 5310, 5330, 5340 Series; Pulsar Bi-Color 5091-10-7 pole.
P 12V 30A Trim Relay 582472 & - R473 - 57-R473F1
OMC#582195, 582472, 582473, 584416, 586147, 586224
Pace 610115Kit Wireless Hdmi Extender Kit - 610-115-Kit - 727-610115Kitf1
Includes: Wireless HD Video Transmitter, Wireless HD Video Receiver, IR Emitter & Receiver Cables, 2 AC Adapters. Repeats and transmits HDMI signal wirelessly up to 328ft (Depending on configuration)Features an additional HDMI loop out on the transmitter for the nearest TVSupports resolutions up to 1080p @ 60 HzPasses remote control IR signals with included IR sensors
Pace Dn010134 Dish Wireless Joey® Receiver - Dn010134 - 727-Dn010134F1
The Wireless Joey connects to the Hopper 3 without running wires and cables. Up to three Joey Receivers can be connected through the Wireless Access Point to the Hopper 3 allowing TV anywhere inside or out of the RV. Watch on-demand and recorded content on the Hopper 3 through the wireless Joey Receiver. This system can only be used with the Winegard Trav'ler antenna and requires the Hopper 3 and Wireless Access Point to function correctly.
Pace Dn010888 Dish Wireless Joey® Access Point - Dn010888 - 727-Dn010888F1
Connects up to three Wireless Joey Receivers to the Hopper receiver model with its own wireless network, not impacting the performance of the home network through an ethernet cable. The Wireless Joey Access Point connects via Ethernet cable to a Hopper receiver model.Serves as a wireless access point between one Hopper receiver model and up to three Wireless Joey receivers.Creates its own wireless network that does not impact the performance of a home network.
Panel 360 120Vac Rotary30A Off+2 - 1481-Bss - 661-1481F1
Panel Mount Control W/O Power Trim - 883710A01 - 710-883710A01F1
Panel mount control features a chrome handle and is designed for outboard engines w/o power tirm. Requires a separate Ignition/Choke assembly and cables. The power trim adapter harness is included to convert 3 pin molex connector to the 3 blade Mercury connector. Neutral safety switch leads are 6-1/2' with bullet connectors. Lanyard switch leads also have bullet connectors.For use on select Mercury/Mariner outboards w/o power trim.
Panel Mount Control W/Power Trim - 883710A02 - 710-883710A02F1
Panel mount control features a chrome handle and comes with a 4' trim harness with a 3 pin molex connector. Requires a separate Ignition/Choke assembly and cables. Neutral safety switch leads are 6-1/2' with bullet connectors. Lanyard switch leads also have bullet connectors.For use on select Mercury/Mariner outboards w/integral trim.
Panel Mount Control W/Power Trim - 883710A03 - 710-883710A03F1
Panel mount control features a chrome handle and comes with a 4' trim harness is with a 4 pin molex connector. Requires a separate Ignition/Choke assembly and cables. Neutral safety switch leads are 6-1/2' with bullet connectors. Lanyard switch leads also have bullet connectors.For use on select MCM and Mercury/Mariner outboards w/integral trim.
