Select Category
Electrical
P 12V 30A Trim Relay 582472 & - R473 - 57-R473F1
OMC#582195, 582472, 582473, 584416, 586147, 586224
Pace 610115Kit Wireless Hdmi Extender Kit - 610-115-Kit - 727-610115Kitf1
Includes: Wireless HD Video Transmitter, Wireless HD Video Receiver, IR Emitter & Receiver Cables, 2 AC Adapters. Repeats and transmits HDMI signal wirelessly up to 328ft (Depending on configuration)Features an additional HDMI loop out on the transmitter for the nearest TVSupports resolutions up to 1080p @ 60 HzPasses remote control IR signals with included IR sensors
Pace Dn010134 Dish Wireless Joey® Receiver - Dn010134 - 727-Dn010134F1
The Wireless Joey connects to the Hopper 3 without running wires and cables. Up to three Joey Receivers can be connected through the Wireless Access Point to the Hopper 3 allowing TV anywhere inside or out of the RV. Watch on-demand and recorded content on the Hopper 3 through the wireless Joey Receiver. This system can only be used with the Winegard Trav'ler antenna and requires the Hopper 3 and Wireless Access Point to function correctly.
Pace Dn010888 Dish Wireless Joey® Access Point - Dn010888 - 727-Dn010888F1
Connects up to three Wireless Joey Receivers to the Hopper receiver model with its own wireless network, not impacting the performance of the home network through an ethernet cable. The Wireless Joey Access Point connects via Ethernet cable to a Hopper receiver model.Serves as a wireless access point between one Hopper receiver model and up to three Wireless Joey receivers.Creates its own wireless network that does not impact the performance of a home network.
Panel 360 120Vac Rotary30A Off+2 - 1481-Bss - 661-1481F1
Panel Mount Control W/O Power Trim - 883710A01 - 710-883710A01F1
Panel mount control features a chrome handle and is designed for outboard engines w/o power tirm. Requires a separate Ignition/Choke assembly and cables. The power trim adapter harness is included to convert 3 pin molex connector to the 3 blade Mercury connector. Neutral safety switch leads are 6-1/2' with bullet connectors. Lanyard switch leads also have bullet connectors.For use on select Mercury/Mariner outboards w/o power trim.
Panel Mount Control W/Power Trim - 883710A02 - 710-883710A02F1
Panel mount control features a chrome handle and comes with a 4' trim harness with a 3 pin molex connector. Requires a separate Ignition/Choke assembly and cables. Neutral safety switch leads are 6-1/2' with bullet connectors. Lanyard switch leads also have bullet connectors.For use on select Mercury/Mariner outboards w/integral trim.
Panel Mount Control W/Power Trim - 883710A03 - 710-883710A03F1
Panel mount control features a chrome handle and comes with a 4' trim harness is with a 4 pin molex connector. Requires a separate Ignition/Choke assembly and cables. Neutral safety switch leads are 6-1/2' with bullet connectors. Lanyard switch leads also have bullet connectors.For use on select MCM and Mercury/Mariner outboards w/integral trim.
Panelback 5-1/4" X 3-3/4" X 3" - 4026-Bss - 661-4026F1
Provide electrical insulation for exposed panel backs and mechanical protection for panel backs protruding into lockers. Made of lightweight material for easy drilling for wire entrance and exit.
Panelback 5-1/4" X 7-1/2" X 3" - 4027-Bss - 661-4027F1
Provide electrical insulation for exposed panel backs and mechanical protection for panel backs protruding into lockers. Made of lightweight material for easy drilling for wire entrance and exit.
Panther 550503Ne T5 Electro Steer (W/O Electronics, Remote Or Relay Switch Box) For Kicker Motor For Use With Pro 3 Trollmaster - 550503Ne - 781-550503Nef1
The T5 NE models, without electronics, connect directly to the TrollMaster Pro 3 electronic throttle and steering control unit to provide an overall solution to control the throttle and steering for a kicker motor up to 40 hp. It can be installed on any kicker motor with a threaded tilt tube without drilling any holes in the boat. Installs in minutes and requires only 4" between the main engine and the kicker. Mounting hardware included. 12V. Note: This is not a stand alone system and requires the TrollMaster control unit to operate.
Panther 954200 Electronics Deck Mount, Angled - 95-4200 - 781-954200F1
Securely fasten electronic units up to 16". Designed to work with all major electronics brands. Provides additional deck space, while allowing space to comfortably operate a recessed trolling motor foot pedal. 14.1" Wide between mounting feet. Universal fishfinder and sonar/GPS compatibilityPowder-coated, marine-grade aluminum constructionFits almost every recessed trolling motor foot pedalDrill additional holes to customize
Panther Led Digital Battery Gauge - 55-6500 - 781-556500F1
The Panther battery energy gauge allows you to determine the exact amount of charge remaining in your batteries. It is perfect for any boating, automotive, or industrial use, and can be used with all standard and deep cycle 12 volt lead acid batteries. LED Display meets MIL spec for heat and vibration resistance
Panther Quick Disconnect For Trolling Motor Steering Connector (1 Ea.) - 9909028 - 781-9909028F1
Designed for trolling motor steering connectors. Features a spring action release. The ball stud is 3/8 - 24 thread by 7/8"L. The body is tapped for 3/8 - 24 threaded rod. Zinc plated steel.
Panther Quick Disconnect For Trolling Motor Steering Connectors (2 Per Pack) - 555100 - 781-555100F1
Designed for trolling motor steering connectors. The ball stud is 3/8-24 thread by 1-7/8" long. Body is tapped for 3/8"-24 threaded rod. Made from zinc plated steel. 2 per package.
Panther T4 Electro Steer (W/O Electronics, Remote Or Relay Switch Box) For Kicker Motor For Use With Pro 3 Trollmaster - 550103Ne - 781-550103Nef1
These power steering units include just the power units w/o electronics and are designed to work seamlessly with the TrollMaster Pro 3 remote throttle/steering system. They allow you to steer the auxiliary or gas powered trolling motor from anywhere in your boat.The T4 system will fit every kicker motor with a tilt tube and install in minutes without taking any room away from your transom. It includes a connecting rod with quick disconnects for versatile applications. Requires a minimum 9" clearance between the main engine and kicker motor.Install anywhere on the transom and include a connecting rod to go between the main engine and the kicker motor with quick disconnects.
Parallax 4400Lbu Lithium Battery Charging Module - 4400Lbu - 267-4400Lbuf1
Compatible with: 8300 Series, 5300 Series, 5400 Series, 4400 Series, 45RU, 55RU, 5355R, 6345RU 4 Hour Charging @ 14.0 VDC13.9 Float Mode Maintaining Full ChargeAssembled in North America using US SteelEasy InstallationETL Listed
Parallax Circuit Breaker, One Pole, 15A - Iteq115 - 267-Iteq115F1
Siemens circuit breaker type QP. 1-pole. Requires one 1" space HACR SWD Rated 120/240VAC 10,000 AIC Brand: SiemensListed: UL ListedSpecial Features: 120VAC; 10,000 AICPole: Single Pole, OneRated: HACR SWD RatedSeries: Type QP-Plug InSize: 1"Weight: .2
Parallax Circuit Breaker, One Pole, 20A - Iteq120 - 267-Iteq120F1
Siemens circuit breaker type QP. 1-pole. Requires one 1" space HACR SWD Rated 120/240VAC 10,000 AIC Brand: SiemensListed: UL ListedSpecial Features: 120VAC; 10,000 AICPole: Single Pole, OneRated: HACR SWD RatedSeries: Type QP-Plug InSize: 1"Weight: .2
Parallax Circuit Breaker, One Pole, 30A - Iteq130 - 267-Iteq130F1
Siemens circuit breaker type QP. 1-pole. Requires one 1" space HACR SWD Rated 120/240VAC 10,000 AIC Brand: SiemensListed: UL ListedSpecial Features: 120VAC; 10,000 AICPole: Single Pole, OneRated: HACR SWD RatedSeries: Type QP-Plug InSize: 1"Weight: .2
Parallax Circuit Breaker, Twin Pole, Duplex, 15/20A - Iteq1520 - 267-Iteq1520F1
Siemens duplex circuit breaker type QT. Class CTL Twin. Requires one 1" space HACR SWD Rated 120VAC 10,000 AIC Brand: SiemensListed: UL ListedSpecial Features: 120VAC; 10,000 AICPole: Twin Pole, DuplexRated: HACR SWD RatedSeries: Type QT-Plug InSize: 1"Weight: .3 lbs
