Promariner Prosafefs Galvanic Isolator - 22074 - 175-22074F1

FailSafe Technology with Peace of Mind Dependability. The ProSafe FS Series will interrupt galvanic current flow with other boats at a marina when installed on a boat which is connected to AC Shore Power. This technology maintains AC safety ground and solves the most common forms of corrosion and premature zinc loss within a boats bonding system. The ProSafe FS Series is UL Certified to meet the parameters of the ABYC A-28 recommendation ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators. Built on robust Flat Pack Semiconductor platforms, ensuring that in the event of a failure, the failure is safe by not compromising the ground continuity on-board when connected to AC Shore Power. ABYC A-28 July 2008 Compliant and Fail Safe Certified: Certified by Underwriters Laboratories (UL). Insures shore power safety ground wire is maintained through the isolator.Flat Pack High Power Semiconductors: Robust high power diodes allow the FS Series to meet the new FailSafe criteria for conducting inrush currents 3,000 and 5,000 amps (FS30 and FS60 respectively) for the required duration period.Innovative Design: The FS60 will cool itself in the event it must conduct current insuring cooler operation in this modeIgnition Protected: Meets ISO 8846 and either model can be mounted within an engine compartmentGold Plated Terminations: Simply install in your on board green safety ground wire (between your AC inlet and your AC Panel) to separate your DC Bonding System from your Shore AC Green wire

Promariner Prosport 1.5 Amp Battery Maintainer & Charger - 44001 - 175-44001F1

ProSport 1.5 Amp Fully Automatic Battery Maintainer and Charger is Ideal for personal watercraft, recreational ski and wake boats, ATV's, tractors and more. The ProSport 1.5 Amp fully automatic maintainer is an innovative multi-use charger designed for maximum utility. Concealed mounting holes allow the ProSport 1.5 to be installed on-board or to be used as a portable, with rear die cut foam resting pad. Ring terminal and DC clamp quick connect cable assemblies included. Fully automatic energy saving designMulti-use design, easily configures for on-board or portable useConcealed mounting holes & die cut foam resting pad for portable useExpanded LED display for Power, Charging and Auto Maintain statusMaintain 12 volt lead acid (sealed & vented) batteries up to 150 amp hoursQuick connect DC clamp & ring terminal assembliesWeatherproof and water resistant to IP65Built-in safety with reverse polarity, short circuit, temperature and ignition protectionPre-wired for easy installation3 year warranty

Promariner Protournament 360 Elite Waterproof Battery Charger - 52032 - 175-52032F1

Delivers maximum charging performance and extended battery life100% charging output with AC power from 90-135 VAC50% lighter and 2 to 3 times faster than traditional chargersForced Induction Cooling on 360 models for cooler operation & faster charge timesDigital LED display with dual mode battery status monitor3 Charge profiles include: Standard Flooded/AGM batteries, HP AGM1 for pure lead AGM batteries like OPTIMA Blue Top Marine Batteries, HP AGM 2 for pure lead AGM Batteries like Odyssey Marine BatteriesDigital 5-stage charging w/temperature compensationSystem OK & individual battery trouble status indicatorsBuilt-in Safety & Pre-Wired for Easy InstallationShock resistant, space saving extruded aluminum designDual in-line DC safety fuses for trolling motor and house batteriesOver-voltage, overload, over-temperature, reverse polarity and ignition protectionDistributed-On-Demand™ technology

Promariner Remote Battery Bank Status Indicator - 51060 - 175-51060F1

Remote "Push to Test" status indicators for up to 3 batteries with easy-to-read LED indicators Display is universal flush or surface mount capable

Promariner Truepower Combi Qs 24V 1500 Watt Combination Inverter (Modified Sine Wave)/Charger - 1524 - 175-01524F1

2.8 x surge rating with 1.0 power factor for demanding applications like air conditioners, microwaves, and refrigerators7 selectable 3-stage battery charge profilesInstant AC transfer switch passes AC shore/station power. Charges batteries when shore/station power is present or switches safely into inverter modeQuasi (Modified) sine wave technology. Ideal for large AC load applications such as air conditioners, refrigerators, microwaves, hair dryers, office equipment, power tools, etc.Overload, over temperature, high and low battery voltage protectionRemovable deluxe remoteOn/Off/Standby power modes and high visibilityLED indicators for charger, inverter and fault modes

Pullrite 4447 Single Point Hitch Rota-Flex Pin Box Isolator - 4447 - 337-4447F1

Rota-Flex pin box isolator

Push Button Switch, On/Off W/5" Wire Leads - Mp21460 - 11-Mp21460F1

Push In Door Latch - Wf-87/8900-Dl - 715-Wf878900Dlf1

Pvc Fabric Light Gry Tendy - 8M0159172 - 720-8M0159172F1

Pvc Terminal Cap - Red (2-2/0 Ga.) - 415196-1 - 354-4151961F1

These Terminal Caps are designed to insulate terminals protecting cables from corrosion and shorting. May be used on uninsulated, high amperage stud connections on chargers, inverters, starters, windlasses, solenoids, and other high amperage equipment. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals.

Pvc Terminal Cap Red (8-2 Ga.), Pair - 415194-1 - 354-4151941F1

These Terminal Caps are designed to insulate terminals protecting cables from corrosion and shorting. May be used on uninsulated, high amperage stud connections on chargers, inverters, starters, windlasses, solenoids, and other high amperage equipment. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals.

Pwc Solenoid - 18-6859 - 47-6859F1

These all NEW solenoids meet OEM specs and are 100% OEM interchangeable so no installation modifications are required. 100% copper windings for maximum magnetic pull strength. Copper contact disc for longer life and solid copper terminals ensure reduced voltage drop. Brackets and cannisters are plated to resist corrosion. All solenoids are fully backed by the Sierra warranty.

Pwc Starter - 18-6873 - 47-6873F1

These all NEW replacement starters feature a permanent magnet design for more torque and longer life. They meet OEM specs and meet or exceed OEM output for guaranteed performance. High temperature epoxy coated armatures provides strength to secure and insulate wires. 90/10 copper bushings or heavy duty needle bearings for longer life. All Sierra starters are fully backed by the Sierra warranty.See Sierra's catalog for current application information.

Pwc Starter - 18-6877 - 47-6877F1

These all NEW replacement starters feature a permanent magnet design for more torque and longer life. They meet OEM specs and meet or exceed OEM output for guaranteed performance. High temperature epoxy coated armatures provides strength to secure and insulate wires. 90/10 copper bushings or heavy duty needle bearings for longer life. All Sierra starters are fully backed by the Sierra warranty.See Sierra's catalog for current application information.

Quad Ring-Northern Lights - 23-0400 - 47-230400F1

Quantum Wired-Wireless Radome Wired And Wireless W/10M Power - T70243 - 152-T70243F1

Quicksilver 50-808011A05 Starter, Mercury - 808011A05 - 710-50-808011A05F1

Starter.Visit www.quicksilver-products.com for up to date application information.

Quicksilver 50-892339T01 Starter, Mercury/Mariner - 892339T01 - 710-50-892339T01F1

Starter.Visit www.quicksilver-products.com for up to date application information.

Quicksilver 50-893890T Starter, Mercury - 893890T - 710-50-893890Tf1

Starter.Visit www.quicksilver-products.com for up to date application information.

Quicksilver 50-893891T Starter, Mercury - 893891T - 710-50-893891Tf1

Starter.Visit www.quicksilver-products.com for up to date application information.

Quicksilver 50-893892T Starter, Mercury - 893892T - 710-50-893892Tf1

Starter.Visit www.quicksilver-products.com for up to date application information.

Quicksilver 50-8M0033984 Starter, Mercury/Mariner - 8M0033984 - 710-50-8M0033984F1

Starter.Visit www.quicksilver-products.com for up to date application information.

Quicksilver 50-8M6007264 Starter - Volvo/Omc High Torque - 8M6007264 - 710-50-8M6007264F1

For 10MT series: direct drive; 12-Volt; CW; 9-Tooth.High torque starter, replaces low torque version. Replaces: AC Delco 10455603, 1109482, 1998314, 1998513, 1998566, 1998568, 1998569, 1998570, 1998571. J & N 410-12127. Lester 6423, 6425. OMC 984456, 986505. Volvo Penta 3850525, 3850525-1, 3853982, 3853982-1, 3855177

Quicksilver 50-8M6007289 Starter - Volvo/Omc - 8M6007289 - 710-50-8M6007289F1

For 10MT Series: direct drive; 12-Volt; CCW; 9-Tooth. Used on OMC, Thermo Electron, Volvo-Penta, & others with a 4, 6, or 8cyl. engine. Replaces: Crusader 41420, 42091, 42150, RA122009. AC Delco 10455602, 1108374, 1108742, 1109369, 1109485, 19010615, 1998316, 26925202A.

Quicksilver 50-8M6007321 Starter, Johnson/Evinrude - 8M6007321 - 710-50-8M6007321F1

Starter.Visit www.quicksilver-products.com for up to date application information.