Select Category
Electrical
Scotty 1001S Replacement Wire, 200', 6/Case - 1001S - 736-1001Sf1
150 pound test.
Scotty 1002K Replacement Wire 400' W/Terminal Kit, 6/Case - 1002K - 736-1002Kf1
150 pound test with terminal fastening kit.
Scotty 1004 Wire Connector Sleeves (10Pk) - 1004 - 736-1004F1
#1004 includes: 10 Sleeves for joining wire line or for locating line releases.
Scotty 1011 Double Line Connector Sleeves, 12Ea 10 Packs/Case - 1011 - 736-1011F1
Double black brass sleeves for joining wire or heavy monofilament line.
Scotty 1133 12 Guage 2 Conductor Power Wire 12' - 1133 - 736-1133F1
12 Guage 2 conductor power wire 12'
Scotty 1157 Wire Connector Sleeve & Thimble Kit - 1157 - 736-1157F1
#1157 Thimble Kit includes: Two stainless steel thimbles and 4 brass connector sleeves.
Scotty 2404 Heavy Duty Connector Sleeves, 12Ea 10 Packs/Case - 2404 - 736-2404Sf1
10 Heavy Duty Brass Connector Sleeves For use with the Scotty High Performance 180 lb. test cable
Scotty Led Sea-Light W/Suction Cup - 835 - 736-835F1
W/Suction Cup: A non-permanent safety addition that is perfectly portable for kayaks and small watercraft. Designed to meet the demands of the sea but also ideal for within a vehicle, for camping and whenever a reliable high efficient light is needed. Includes versatile suction cup mount for use in both salt and fresh water. Includes ACR detachable, fully sealed LED C-Light™Includes a bright 20 Lumen White LED for location assistance during emergenciesEasy twist ON/OFF activation that is waterproof testedImpact resistant construction and is USCG/SOLAS ApprovedC-Light™ is easily removed and can be attached to life jackets, backpacks or hang from a pocketC-Light™ requires two 'AA' 1.5V batteries (batteries not included)C-Light™ has an extensive and continuous operating life for over 30 hoursContinuous operation over 30 hours
Scotty Led Sea-Light W/Suction Cup - 835 - 736-835Sf1
W/Suction Cup: A non-permanent safety addition that is perfectly portable for kayaks and small watercraft. Designed to meet the demands of the sea but also ideal for within a vehicle, for camping and whenever a reliable high efficient light is needed. Includes versatile suction cup mount for use in both salt and fresh water. Includes ACR detachable, fully sealed LED C-Light™Includes a bright 20 Lumen White LED for location assistance during emergenciesEasy twist ON/OFF activation that is waterproof testedImpact resistant construction and is USCG/SOLAS ApprovedC-Light™ is easily removed and can be attached to life jackets, backpacks or hang from a pocketC-Light™ requires two 'AA' 1.5V batteries (batteries not included)C-Light™ has an extensive and continuous operating life for over 30 hoursContinuous operation over 30 hours
Scotty Led Sea-Light, 41" High W/Fold Down Pole - 838 - 736-838F1
W/Fold Down Pole: The corrosion proof construction of this system provides a long service life in both fresh and salt water applications as it is designed with stainless steel fasteners and a 1/2" stainless fold down pole. 41" Tall. Includes ACR detachable, fully sealed LED C-Light™Includes a bright 20 Lumen White LED for location assistance during emergenciesEasy twist ON/OFF activation that is waterproof testedImpact resistant construction and is USCG/SOLAS ApprovedC-Light™ is easily removed and can be attached to life jackets, backpacks or hang from a pocketC-Light™ requires two 'AA' 1.5V batteries (batteries not included)C-Light™ has an extensive and continuous operating life for over 30 hoursContinuous operation over 30 hours
Sea Dog 4429441 Led G4 Bulb - 442944-1 - 354-4429441F1
G4 Lamps feature 14 low amp draw LEDs that produce 60 lumens. A direct drop-in replacement for halogen bulbs with a 2-Pin GU4 base. Direct 120° illumination with no wasted light. 12VDC. LED G4 bulb is designed for interior use only.
Sea Hawk 1284Glkit Tuff Stuff 2 Gallon Kit, Light Gray - 1284Glkit - 95-1284Glkitf1
A high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. It can be used as a universal primer for corrosion protection on most metals below the waterline such as props, keels, trim tabs, thru hulls and lower units or for priming any metal. Fills deep scratches and gouges in a few coats.Not for sale in California.
Sea Hawk 1284Qtkit Tuff Stuff 1/2 Gallon Kit, Light Gray - 1284Qtkit - 95-1284Qtkitf1
A high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. It can be used as a universal primer for corrosion protection on most metals below the waterline such as props, keels, trim tabs, thru hulls and lower units or for priming any metal. Fills deep scratches and gouges in a few coats.Not for sale in California.
Sea-Dog 1591031 Wire Rope Clamp, 1/8" - 159103-1 - 354-1591031F1
Zinc plated cast steel.
Sea-Dog 1591051 Wire Rope Clamp, 3/16" - 159105-1 - 354-1591051F1
Zinc plated cast steel.
Sea-Dog 1591061 Wire Rope Clamp, 1/4" - 159106-1 - 354-1591061F1
Zinc plated cast steel.
Sea-Dog 1595021 Stainless Wire Rope Clip, 2 Mm Wire Size - 159502-1 - 354-1595021F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 1595041 Stainless Wire Rope Clip, 4 Mm Wire Size - 159504-1 - 354-1595041F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 1595051 Stainless Wire Rope Clip, 5 Mm Wire Size - 159505-1 - 354-1595051F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 1595061 Stainless Wire Rope Clip, 6 Mm Wire Size - 159506-1 - 354-1595061F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 1595081 Stainless Wire Rope Clip, 8 Mm Wire Size - 159508-1 - 354-1595081F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 159510 Stainless Wire Rope Clip, 10 Mm Wire Size - 159510-1 - 354-1595101F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 171206 Stainless Steel Light Thimble, 1/4" - 171206 - 354-171206F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these thimbles are ideal for general rigging applications.
Sea-Dog 171208 Stainless Steel Light Thimble, 5/16" - 171208 - 354-171208F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these thimbles are ideal for general rigging applications.
