Select Category
Electrical
Seachoice 52891 Led Square Stud-Mount Clearance/Marker Light - Mcl36Assch - 50-52891F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Stud mount black base; two-wire designLens with reflex eliminates need for separate reflector6 diodesInstallation hardware includedAcrylic lens, ABS housing
Seachoice 52911 Submersible Under 80" Trailer Light Kit - Tl9Rksch - 50-52911F1
Includes: 2 stud-mount tail lights with red side marker/reflectors, license bracket, 20' wiring harness and hardware. Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installeScrew-on lens, easy to change bulbsStud mount on 2" centersGrounds through mounting studsShock-proof socket guarantees long bulb lifeAcrylic lens, corrosion proof plastic housingPassenger side light is 6-function: stop, turn, tail, rear reflex, side marker, and side reflex
Seachoice 52921 Submersible Over 80" Trailer Light Set - Tl60Rksch - 50-52921F1
Contains two tail lights. Passenger side light is 7-function: stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex. Driver side light also includes license illuminator. Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedIncludes mounting hardwareCorrosion resistant hardwareScrew-on lens, easy to change bulbsStud mount on 2" centersGrounds through mounting studs
Seachoice 52941 Waterproof Identification Light Bar - Mc93Rksch - 50-52941F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Surface mount on 7-1/2" centersSealed, waterproof lightsHard wired, power and groundPolycarbonate lens and housing, ABS base
Seachoice 52961 4-Way Wishbone Style Wiring Harness 25' - A25Whsch - 50-52961F1
Wire descriptions: White - ground (21 Ga.), Brown - tail lamps (19 Ga.), Yellow - driver side stop/turn (19 Ga.), Green - passenger side stop/turn (19 Ga.). 25-ft 4-way harness with 4-ft trunk connector.
Seachoice 53001 Driver Side Light, 7-Function - St7Rssch - 50-53001F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedScrew-on lens, easy to change bulbsStud mount on 2" centersGrounds through mounting studsShock-proof socket guarantees long bulb lifeAcrylic lens, corrosion proof plastic housing
Seachoice 53003 Led Thinline Stop/Turn/Tail/Backup Light, Surface Mount, 20.5" - Stl264Rsch - 50-53003F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed DOT-compliant backup light built into a thinline stop/turn/tail lightSold individually
Seachoice 53004 Led Flood Beam Round Work Light, 12/24V, White Housing, 4 Leds - Tll30Fwsch - 50-53004F1
Heavy duty design with powder coated die cast aluminum housing and polycarbonate lens. Dual power use with 12VDC and 24VDC systems. Stainless steel mounting hardware. IP69K Rating: Highest designation available for water ingress testing, offering increased reliability and service life when subjected to severe environmental conditions or cleaning methods.
Seachoice 53007 Led Flood Beam Square/Compact Work Light, 12/24V, White Housing, 1 Led - Tll51Fwsch - 50-53007F1
Heavy duty design with powder coated die cast aluminum housing and polycarbonate lens. Dual power use with 12VDC and 24VDC systems. Stainless steel mounting hardware. IP69K Rating: Highest designation available for water ingress testing, offering increased reliability and service life when subjected to severe environmental conditions or cleaning methods.
Seachoice 53008 Led Flood Beam Rectangular Work Light, 12/24V, White Housing, 6 Leds - Tll60Fwsch - 50-53008F1
Heavy duty design with powder coated die cast aluminum housing and polycarbonate lens. Dual power use with 12VDC and 24VDC systems. Stainless steel mounting hardware. IP69K Rating: Highest designation available for water ingress testing, offering increased reliability and service life when subjected to severe environmental conditions or cleaning methods.
Seachoice 53011 One™ Series Led 6" Oval Light Kit, 1 Pr. - Tll002Rksch - 50-53011F1
Sonically sealed Waterproof
Seachoice 53013 One™ Combination Tail Light, Passenger Side - Stl008Rsch - 50-53013F1
Designed for 12V marine trailer application Sealed, waterproof designMeets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed
Seachoice 53014 One™ Combination Tail Light, Driver Side W/License Plate Illuminator - Stl009Rsch - 50-53014F1
Designed for 12V marine trailer application Sealed, waterproof designMeets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed
Seachoice 53018 Led Flood Beam Square/Compact Work Light, 12/24V, White Housing, 3 Leds - Tll52Fwsch - 50-53018F1
Heavy duty design with powder coated die cast aluminum housing and polycarbonate lens. Dual power use with 12VDC and 24VDC systems. Stainless steel mounting hardware. IP69K Rating: Highest designation available for water ingress testing, offering increased reliability and service life when subjected to severe environmental conditions or cleaning methods.
Seachoice 58011 Standard Duty Tail Light Converter With Wiring Kit - 50-58011 - 50-58011F1
Adapts import and domestic tow vehicles with 3-wire systems to tow trailers equipped with 2-wire systems. Powers trailer lighting directly from the tow vehicle's battery, keeping additional current draw away from sensitive vehicle circuits. Features advanced circuit protection to protect the tow vehicle's wiring systems from short-circuit or mis-wire situationsDesigned to operate with both incandescent and LED trailer lighting systems16 ga. Single 18" input wires for stop lamp, tail light, left turn & ground circuits (red, yellow, brown & white)16 ga. Single 60" input wire for left turn circuit (green)16 ga. Bonded 60" output wires with a molded 4-flat car-side connectorTin plated .187 4-flat connector terminals for improved current capacity and corrosion resistance
Seachoice 58041 Traler Wiring Mounting Bracket, 5-Way Flat - 50-58041 - 50-58041F1
Mounts wiring connectors to rear of tow vehicleConvenient "Push-In" connector mountingBlack powder coat finishContains mounting hardware
Seachoice 59996 Grommet Kit With Tool20 Sets - 1/4" Grommets - Rp-Bp9701Sc - 50-59996F1
Kit includes: Brass Grommets & Washers, 3pc steel tool set (base, handle, cutter) and instruction sheet.
Seachoice 59997 Grommet Kit With Tool20 Sets - 5/16" Grommets - Rp-Bp9702Sc - 50-59997F1
Kit includes: Brass Grommets & Washers, 3pc steel tool set (base, handle, cutter) and instruction sheet.
Seachoice 59998 Grommet Kit With Tool20 Sets - 3/8" Grommets - Rp-Bp9703Sc - 50-59998F1
Kit includes: Brass Grommets & Washers, 3pc steel tool set (base, handle, cutter) and instruction sheet.
Seachoice 59999 Grommet Kit With Tool10 Sets - 1/2" Grommets - Rp-Bp9704Sc - 50-59999F1
Kit includes: Brass Grommets & Washers, 3pc steel tool set (base, handle, cutter) and instruction sheet.
Seachoice 6-Gang Fuse And Terminal Block, Brass Clips And Contacts, Sfe 20 Amp Of 3Ag Fuse - 13441 - 50-13441F1
Seachoice Fuse and Terminal Blocks feature a heavy-duty molded base, and brass clips and contact for excellent corrosion resistance. This block accepts SFE 20 amp or 3AG series fuses. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Heavy-duty molded baseBrass clips and contacts resist corrosionAccepts SFE 20 amp or 3AG series fusesEach buss bar has (1) #8-32 x 3/4 inch stud with 2 hex nutsMeasures 4-1/2 inches long x 3-1/4 inches wide x 3/4 inches highManufacturer part number 50-13441
Seachoice 60271 3-To-1 Heat Shrink Insulated Quick Disconnect, 22-18 Ga., 0.250" Female, Red, 25-Pack - 60271 - 50-60271F1
Clear polyolefin 3:1 shrink ratio tubing with adhesive lining provides maximum clarity for wire inspection purposes. Simply insert the wire, crimp and heat shrink for a complete environmental seal. Marine-grade heat shrinkable quick-disconnect terminalsTin-plated brass with butted seam barrel
Seachoice 60273 3-To-1 Heat Shrink Insulated Quick Disconnect, 22-18 Ga., 0.187" Female, Red, 25-Pack - 60273 - 50-60273F1
Clear polyolefin 3:1 shrink ratio tubing with adhesive lining provides maximum clarity for wire inspection purposes. Simply insert the wire, crimp and heat shrink for a complete environmental seal. Marine-grade heat shrinkable quick-disconnect terminalsTin-plated brass with butted seam barrel
Seachoice 60281 3-To-1 Heat Shrink Insulated Quick Disconnect, 22-18 Ga., 0.250" Male, Red, 25-Pack - 60281 - 50-60281F1
Clear polyolefin 3:1 shrink ratio tubing with adhesive lining provides maximum clarity for wire inspection purposes. Simply insert the wire, crimp and heat shrink for a complete environmental seal. Marine-grade heat shrinkable quick-disconnect terminalsTin-plated brass with butted seam barrel
Seachoice 60283 3-To-1 Heat Shrink Insulated Quick Disconnect, 22-18 Ga., 0.187" Male, Red, 25-Pack - 60283 - 50-60283F1
Clear polyolefin 3:1 shrink ratio tubing with adhesive lining provides maximum clarity for wire inspection purposes. Simply insert the wire, crimp and heat shrink for a complete environmental seal. Marine-grade heat shrinkable quick-disconnect terminalsTin-plated brass with butted seam barrel
