Select Category
Electrical
Seadog Waterproof Led Combination Bow Light | Uscg 1 Nm Approved | #8 Fastener | 67 Ip Rating - 400058-1 - 354-4000581F1
Black LED Combination Bow Light 400058 is approved for USCG 1 NM (Colreg 1 mile) and is constructed of injection molded ABS with a Zamak base. Installs with two #8 RH fasteners (not included). IP67 waterproof rating. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seatech 35 Series Connector, 1/2" - 3/8" Reducing Union - 013516-1008 - 694-0135161008F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 1/2" Collet Clip - 013547-10 - 694-01354710F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 1/2" Elbow Clip - 012349-15 - 694-01234915F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 1/2" End Stop - 013545-10 - 694-01354510 Superseded By: 694-0959109F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 1/2" Hose Barb - 013513-1008 - 694-0135131008F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 1/2" Stackable Elbow - 013518-10 - 694-01351810F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 3/8" Swivel Elbow, Female - 013520-0808 - 694-0135200808F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 3/8" Union Elbow - 013517-08 - 694-01351708F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 3/8" Union Tee - 013523-08 - 694-01352308F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, Ice Maker Stem Valve - 013543-1004 - 694-0135431004F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, Stackable 1/2" Hose Barb Union - 013511-1008 - 694-0135111008F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seaworthy Seacaam/Fm Marine Stereo Amplified Am/Fm 12-3/4" Antenna - Includes 60" Wire - Seacaam/Fm - 646-Seacaamfmf1
12-3/4" antenna60° wire with plugUnder dash mount
Shakespeare Pl258G Barrel Connector For Pl-259-Ended Cables - Pl-258-G - 167-Pl258Gf1
Gold plated brass connector.
Shakespeare Pl25958G Pl259 Vhf Radio Connector W/Ug175 Adapter - Pl-259-58-G - 167-Pl25958Gf1
Gold plated brass connector.
Shakespeare Pl2598Xg Pl259 Vhf Radio Connector W/Ug176 Adapter - Pl-259-8X-G - 167-Pl2598Xgf1
Gold plated brass connector.
Shakespeare Pl259G Vhf Radio Connector - Pl-259-G - 167-Pl259Gf1
Gold plated brass connector.
Shields 2000344 Marine Exhaust Water Series 200 Hose Without Wire, 3/4" X 12-1/2' - 16-200-0344 - 88-2000344F1
Use for straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2000584 Marine Exhaust Water Series 200 Hose Without Wire, 5/8" X 12-1/2' - 16-200-0584 - 88-2000584F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2001004 Marine Exhaust Water Series 200 Hose Without Wire, 1" X 12-1/2' - 16-200-1004 - 88-2001004F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2001124 Marine Exhaust Water Series 200 Hose Without Wire, 1-1/2" X 12-1/2' - 16-200-1124 - 88-2001124F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
