Wiring & Connectors
Seadog Buss Bar Stud Terminal, 150A - 426728-1 - 354-4267281F1
These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it useful for consolidating multiple wires or feeding multiple circuits. Constructed of tin plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included).
Seadog Buss Bar Stud Terminal, 250A - 426738-1 - 354-4267381F1
These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it useful for consolidating multiple wires or feeding multiple circuits. Constructed of tin plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included).
Seadog Double Pole Double Throw 8 Terminal Blade Light Tip 12V 15 Amp Toggle Switch - 420128-1 - 354-4201281F1
Light Tip Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Toggle bat features a lighted tip which is white in the OFF position and red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. Easy installation. 15A @ 12VDC.
Seadog Plastic 12V Spot & Flood Light Second Control Station Hard Wired Remote - 405691-1 - 354-4056911F1
Wireless 2nd station remote for spot/flood lights. Require 12 volt connection. These controls are 12 volt and hard wired remotes.
Seadog Plastic 12V Spot & Flood Light Second Control Station Hard Wired Remote - 405693-1 - 354-4056931F1
Wireless 2nd station remote for spot/flood lights. Require 12 volt connection. These controls are 12 volt and hard wired remotes.
Seatech 35 Series Connector, 1/2" - 3/8" Reducing Union - 013516-1008 - 694-0135161008F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 1/2" Collet Clip - 013547-10 - 694-01354710F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 1/2" Elbow Clip - 012349-15 - 694-01234915F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 1/2" End Stop - 013545-10 - 694-01354510 Superseded By: 694-0959109F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 1/2" Hose Barb - 013513-1008 - 694-0135131008F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 1/2" Stackable Elbow - 013518-10 - 694-01351810F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 3/8" Swivel Elbow, Female - 013520-0808 - 694-0135200808F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 3/8" Union Elbow - 013517-08 - 694-01351708F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, 3/8" Union Tee - 013523-08 - 694-01352308F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, Ice Maker Stem Valve - 013543-1004 - 694-0135431004F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seatech 35 Series Connector, Stackable 1/2" Hose Barb Union - 013511-1008 - 694-0135111008F1
Connectors utilize a swivel nut with NPS straight threads, and a cone seal. This allows the installer to thread onto NPT, NPS, BSP and most threads without tools or thread sealant. Simply thread on, and hand tighten for a zero leak seal. Small lengths of tubing can be eliminated by using stackable connectors. Manufactured from high performance thermal plastic, in an off-white color. Uses EPDM O-ring. Max. pressure: 100psi/6.8 bar. Max. temperature: 180°F/82°C.
Seaworthy Seacaam/Fm Marine Stereo Amplified Am/Fm 12-3/4" Antenna - Includes 60" Wire - Seacaam/Fm - 646-Seacaamfmf1
12-3/4" antenna60° wire with plugUnder dash mount
Shakespeare Pl258G Barrel Connector For Pl-259-Ended Cables - Pl-258-G - 167-Pl258Gf1
Gold plated brass connector.
Shakespeare Pl25958G Pl259 Vhf Radio Connector W/Ug175 Adapter - Pl-259-58-G - 167-Pl25958Gf1
Gold plated brass connector.
Shakespeare Pl2598Xg Pl259 Vhf Radio Connector W/Ug176 Adapter - Pl-259-8X-G - 167-Pl2598Xgf1
Gold plated brass connector.
Shakespeare Pl259G Vhf Radio Connector - Pl-259-G - 167-Pl259Gf1
Gold plated brass connector.
Shields 2000344 Marine Exhaust Water Series 200 Hose Without Wire, 3/4" X 12-1/2' - 16-200-0344 - 88-2000344F1
Use for straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2000584 Marine Exhaust Water Series 200 Hose Without Wire, 5/8" X 12-1/2' - 16-200-0584 - 88-2000584F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2001004 Marine Exhaust Water Series 200 Hose Without Wire, 1" X 12-1/2' - 16-200-1004 - 88-2001004F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
Shields 2001124 Marine Exhaust Water Series 200 Hose Without Wire, 1-1/2" X 12-1/2' - 16-200-1124 - 88-2001124F1
For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.
