Select Category
Engine & Fuel
Shields 3370566 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 50' - 16-337-0566 - 88-3370566F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370565 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 25' - 16-337-0565 - 88-3370565F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370563 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 10' - 16-337-0563 - 88-3370563F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370560 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 250' - 16-337-0560S - 88-3370560F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370386 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 50' - 16-337-0386 - 88-3370386F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370385 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 25' - 16-337-0385 - 88-3370385F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370383 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 10' - 16-337-0383 - 88-3370383F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370380 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 250' - 16-337-0380S - 88-3370380F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370146 Silverado 4000 Type B1-15 Outboard Fuel Line, 1/4" X 50' - 16-337-0146 - 88-3370146F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370143 Silverado 4000 Type B1-15 Outboard Fuel Line, 1/4" X 10' - 16-337-0143 - 88-3370143F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 16375038036D Fuel Feed Line With Fire Sleeve, 3/8" X 3' - 16-375-038036D - 88-16375038036Df1
Stainless Steel Braided PTFE hose is an ideal choice for marine applications. Straight quick connector and fire sleeveExtreme reliability and longer service life-60°C to +260°C Operating Temperature RangesNot affected by heat, aging, Ozone or UV exposureCompatible with a wide range of chemicals and additivesDesigned to dissipate any potential static charges for added safetyCFR 33 USCG and SAE J1527 approvedUltra Low Permeation
Sherwood Gc501 Cummins Seawater Pump - Gc5-01 - 762-Gc501F1
Impeller Kit: 15000K Minor Repair Kit: 23980Major Repair Kit 23981
Sherwood Gc101 Cummins Seawater Pump - Gc1-01 - 762-Gc101F1
Impeller Kit: 15000K Minor Repair Kit: 23980Major Repair Kit 23981
Sherwood 19674 Replacement Seal - 19674 - 762-19674F1
Replacement Seal
Sherwood 15955S Replacement Seal - 15955S - 762-15955Sf1
Replacement Seal
Shell Rotella® T5 Synthetic Blend Diesel Engine Oil - 550045130 - 258-550045130F1
Shell ROTELLA® T5 10W-30 Synthetic Blend Technology has been enhanced with synthetic base oils, plus advanced additive technology to provide Triple Protection® that adapts to your driving conditions. ROTELLA® T5 oil meets or exceeds all API CK-4 specifications and is fully backwards compatible with engines requiring API CJ-4 designated oil. Excellent wear protectionExceptional deposit control/cleanlinessExcellent protection against oil breakdownSustained emission control system durability in particulate filters and after-treatment systemsImproved fuel economyImproved low temperature flow Priced each, sold in case packs only
Shell 550054467 Rotella T1 Diesel Engine Oil, 40W 5 Liters, 3/Case - 550054467 - 852-550054467F1
Rotella® T1 is an easy-flow single grade oil provides quality lubrication, consistent performance and excellent wear protection in diesel engines. Low ash content to minimize formation of deposits and to help keep intake ports clean. Outstanding oxidation resistance to help maximize service life. Excellent rust and corrosion protection. Optimized dispersants to help prevent engine sludge and varnish deposits. Sold in case packs only.
Shell 550054460 Rotella T1 Diesel Engine Oil, 30W 5 Liters, 3/Case - 550054460 - 852-550054460F1
Rotella® T1 is an easy-flow single grade oil provides quality lubrication, consistent performance and excellent wear protection in diesel engines. Low ash content to minimize formation of deposits and to help keep intake ports clean. Outstanding oxidation resistance to help maximize service life. Excellent rust and corrosion protection. Optimized dispersants to help prevent engine sludge and varnish deposits. Sold in case packs only.
Shell 550049481 Rotella® T4 Triple Protection Heavy Duty Diesel Engine Oil, 946Ml, 6/Case - 550049481 - 852-550049481F1
With millions of miles of real world testing, Shell Rotella® T4 Triple Protection° oils use a proprietary formula exclusive to Shell. They are designed to protect under the most severe engine conditions found in modern low-emission and older, hard working diesel engines. Sold in case packs only.
Shell 550049479 Rotella® T6 Synthetic Heavy Duty Diesel Engine Oil, 5W-40, Qt - 550049479 - 258-550049479F1
The Energized Protection® of Shell Rotella® heavy duty diesel engine oil controls acid, deposit and wear. Maximum protection, delivering better wear protection and fuel economy.Sold in case packs only.
Shell 550045148 Rotella® T4 Triple Protection Heavy Duty Diesel Engine Oil, 208.2L - 550045148 - 852-550045148F1
With millions of miles of real world testing, Shell Rotella® T4 Triple Protection° oils use a proprietary formula exclusive to Shell. They are designed to protect under the most severe engine conditions found in modern low-emission and older, hard working diesel engines.
Shell 550045135 Rotella® T4 Triple Protection Heavy Duty Diesel Engine Oil, 5L, 3/Case - 550045135 - 852-550045135F1
With millions of miles of real world testing, Shell ROTELLA® T4 Triple Protection® oils use a proprietary formula exclusive to Shell. They are designed to protect under the most severe engine conditions found in modern low-emission and older, hard working diesel engines. Sold in case packs only.
Shell 550045128 Rotella® T4 Triple Protection Heavy Duty Diesel Engine Oil, 18.9L, 2/Case - 550045128 - 852-550045128F1
With millions of miles of real world testing, Shell ROTELLA® T4 Triple Protection® oils use a proprietary formula exclusive to Shell. They are designed to protect under the most severe engine conditions found in modern low-emission and older, hard working diesel engines. Sold in case packs only.
Shell 550045125 Rotella® T4 Triple Protection Heavy Duty Diesel Engine Oil, 9.5L, 2/Case - 550045125 - 852-550045125F1
With millions of miles of real world testing, Shell ROTELLA® T4 Triple Protection® oils use a proprietary formula exclusive to Shell. They are designed to protect under the most severe engine conditions found in modern low-emission and older, hard working diesel engines. Sold in case packs only.
