Select Category
Engine & Fuel
Seadog Side Light - 2-7/8" X 2-3/16" X 2-1/8" - Injection Molded Polycarbonate & Stamped Stainless Steel - 400004-1 - 354-4000041F1
For replacement of existing lighting (not for new construction). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for navigation lights for more information.
Seadog Side Light - 2-7/8" X 2-3/16" X 2-1/8" - Injection Molded Polycarbonate & Stamped Stainless Steel - 400003-1 - 354-4000031F1
For replacement of existing lighting (not for new construction). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for navigation lights for more information.
Seadog Replacement Cap & Gasket - 325239-1 - 354-3252391F1
Fits 325175 & 325235 rod holders.
Seadog Exhaust Thru Hull | Cast 316 Stainless | Includes Stainless Flap With Rubber Seal - 521130 - 354-521130F1
Stainless flap with rubber seal. Cast 316 Stainless.
Seadog Exhaust Thru Hull | Cast 316 Stainless | Includes Stainless Flap With Rubber Seal - 521125 - 354-521125F1
Stainless flap with rubber seal. Cast 316 Stainless.
Seadog Deck Step | Injection Molded Rubber & Stamped 304 Stainless - 328013-1 - 354-3280131F1
This Deck Step is lined with injection molded rubber to facilitate traction and framed by stamped 304 stainless steel for corrosion resistance and durability.
Seadog Adjustable Rail Mount Flagpole | Injection Molded Nylon / Stainless - 327124-1 - 354-3271241F1
Rail mount flagpole made of highly polished, heavy wall stainless steel tubing. The flag is attached to the flagpole using nylon pennant mounts with stainless steel spring wire quick release clips which are designed to hold their shape after continued use. Both pennant mounts can move either direction on the flagpoles allowing flexibility in mounting various sizes of flags.328190 Nylon Adjustable Flag Pole Mounts328195 Stainless Flag Pole Hole Mount Pennant Clips
Seadog Adjustable Rail Mount Flagpole | Injection Molded Nylon / Stainless - 327122-1 - 354-3271221F1
Rail mount flagpole made of highly polished, heavy wall stainless steel tubing. The flag is attached to the flagpole using nylon pennant mounts with stainless steel spring wire quick release clips which are designed to hold their shape after continued use. Both pennant mounts can move either direction on the flagpoles allowing flexibility in mounting various sizes of flags.328190 Nylon Adjustable Flag Pole Mounts328195 Stainless Flag Pole Hole Mount Pennant Clips
Seadog 660020 Impeller Puller | 3-3/4" X 6-3/8" X 7/16" | Investment Cast 316 Stainless - 660020-1 - 354-6600201F1
Allows easier removal of flexible impellers from a pump. Tighten the side grips onto the impeller hub and turn the center screw shaft to pull the impeller out of the pump.
Seadog 5825031 Portable Emergency 3 Step Boarding Ladder, High-Visibility Orange Polycarbonate & Nylon Rope - 582503-1 - 354-5825031F1
These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, railings, stanchions and halyards and will support up to 300 lbs.
Seadog 582501 Portable Emergency 5 Step Boarding Ladder, High-Visibility Orange Polycarbonate & Nylon Rope - 582501-1 - 354-5825011F1
These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, railings, stanchions and halyards and will support up to 300 lbs.
Seadog 5801011 Adjustable Oar Collars - Fits Standard Oars - Injection Molded Polypropylene, 1 Pr. - 580101-1 - 354-5801011F1
These Adjustable Oar Collars fit standard oars, but can be trimmed for smaller ones. These collars cushion stroke, reduce noise, and prevent wear. Split cover makes it quick and easy to install with brass nails (included). Constructed of rugged, flexible polyethylene.
Seadog 442142 Nickel Plated Brass 2 Led White Lights 12.8V .8 Watt Sealed Festoon - 442142-1 - 354-4421421F1
Nickel Plated Brass. 12V, 70 mA. LED Festoon is recommended for indoor use only.
Seadog 4421311 Nickel Plated Brass 1 Led White Lights 12.8V .5 Watt Sealed Festoon - 442131-1 - 354-4421311F1
Nickel plated brass. 12V, 40 mA. LED Festoon is recommended for indoor use only.
Seadog 431250 Drop In 4 Amp 111 Db Horn V.3 With Grills | Powder Coated Steel & Injected Molded Nylon - 431250-1 - 354-4312501F1
Drop-In Hidden Horn V.3 with Grills is constructed of powder coated steel and injection molded nylon. Kit includes horn plus one chrome and one white decorative billet screw-in grill. Hole size 2-3/4" diameter. At 111 decibels and a frequency (Hz) of 370±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577066.
Seadog 431230 Drop In 4 Amp 108 Db Horn V.2 With Grills | Powder Coated Steel & Injected Molded Nylon - 431230-1 - 354-4312301F1
Drop-In Hidden Horn V.2 with Grills is constructed of powder coated steel and injection molded nylon. Kit includes horn plus one chrome and one white decorative billet snap-in grill. Hole size 1-7/8" x 3-3/8". At 108 decibels and a frequency (Hz) of 370±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577065.
Seadog 431210 Drop In 3 Amp 105 Db Horn V.1 With Grills | Powder Coated Steel & Injected Molded Nylon - 431210-1 - 354-4312101F1
Powder coated steel/injected molded nylon. Includes V.1 Horn meets ABYC standard A-23. For use on vessels under 39'.
Seadog 421625 Round Digital 4 To 30 Voltage & 10 Amp Meter | Injected Molded Nylon - 421625-1 - 354-4216251F1
Injection molded nylon. Compact size allows for installation in a variety of locations the same round size as a standard 12V receptacle. For interior or fully protected locations only. DC shunt not required. Volts 4-30. Amps 10.
Seadog 421615 Round Digital 4 To 30 Voltage Meter | Injected Molded Nylon - 421615-1 - 354-4216151F1
Injection molded nylon. Compact size allows for installation in a variety of locations - the same round size as a standard 12V receptacle. For interior or fully protected locations only. Volts 4-30.
Seadog 420355 Long Shaft Three Screw Terminal Three Position Off Ignition Start Switch With Cap - 420355-1 - 354-4203551F1
Three Position Ignition Switch is constructed of stamped brass. For off, ignition, and start functions. 13/16" diameter long shaft. Maximum panel thickness: 1-1/8. Three screw terminal electrical connection. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Includes two keys.
Seachoie Fuel Tank Hold Down Kit (Includes 2 Straps And Mounting Hardware) - 78991 - 50-78991F1
Two 63" poly straps with quick release buckles. Mounting hardware included.
Seachoice Utility Grease Gun, 14 Oz. Lever - 19193 - 50-19193F1
This Seachoice Utility Grease Gun is an easy-to-use tool for executing lube jobs with efficiency and no excess grease discharge. It can use either a 14-oz. (397 g) grease cartridge or take 16 oz. (454 g) of bulk fill. It develops up to 10,000 psi (690 bar), and delivers 6 oz. (170 g) of grease per 100 strokes. It has a cast alloy head and a heavy-duty follower spring for consistent priming. The follower rod lock prevents accidental grease discharge. The contoured, ergonomically designed lever develops more pressure with less effort, and the slip-resistant handle grip assures a firm grip on the lever. This Grease Gun features rugged, wide-band, non-slip knurling, and comes complete with four hardened jaws hydraulic coupler with ball check. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Easy-to-use tool for efficient lube jobs with no excess grease dischargeUses 14-oz. (397 g) grease cartridge or 16 oz. (454 g) of bulk fillDevelops up to 10,000 psi (690 bar), delivers 6 oz. (170 g) of grease per 100 strokesHeavy-duty follower spring for consistent priming, follower rod lock prevents accidental dischargeContoured, ergonomically designed lever with slip-resistant handle gripManufacturer part number 50-19193Rugged, wide-band, non-slip knurlingErgonomically designed T-handle provides positive gripOutputs 6 oz (170 g) of grease per 100 strokesComplete with four hardened jaws hydraulic coupler with ball check
Seachoice Ultra Shrink Jet Flameless Butane Heat Tool (Fuel Not Included) - 61231 - 50-61231F1
The high output flameless heat gun designed for industrial applications where versatility and power are a must. The flameless tool is safe to use in environments where vapors may be present or flames are prohibited. Included deflector attachment evenly distributes heat making heat shrink tubing installation faster. Leave the extension cords behind with this portable ergonomic heat tool. Features Include: Automatic Piezo Ignition SystemDeflector & Stand Attachments circulates heat evenly and provides safe hands-free option1400° F Hot Output the best tool for heavy duty flameless applicationsTool ships with no fuel
Seachoice Twist-Turn 1.25 In. Marine Boat Brass Drain Plug W/ Neoprene Seal - 50-18861 - 50-18861F1
Ideal for replacing lost drain plugs, this brass plated twist-turn drain plug with T-handle creates a watertight seal with a clockwise turn. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Replaces any standard 1-1/4 inch drain plugSimple twist to lock operationCreates watertight sealBrass construction resists corrosionMounts from inside transomManufacturer part number 50-18861
Seachoice Thru Hull Fuel Tank Vent, Chrome-Plated Brass, 5/8 In. - 50-23031 - 50-23031F1
Useful for maintaining proper fuel flow during use and while filling, Seachoice Thru-Hull Fuel Tank Vents are constructed of durable, polished chrome-plated cast brass. This is a straight vent that fits 9/16-inch or 5/8-inch hose. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Allows for thru-hull fuel tank venting via a hose (not included) from the tankDurable, polished chrome-plated cast brass construction for corrosion resistanceTwo vent holesFits 9/16-inch or 5/8-inch hose
