Select Category
Engine & Fuel
Seachoice 52791 Led Fleet Count Sealed Waterproof Tail Light, 7 Function Passenger Side - Stl14Rssch - 50-52791F1
12-LED, Passenger Side. 7-Function: Stop, turn, tail, rear clearance, rear reflex, side marker, side reflexHard wired, with separate ground wire Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedUniversal MountWaterproofLow profileAcrylic lens, ABS plastic housing
Seachoice 52681 Led 3/4" Mini Sealed Marker/Clearance Kit Red - Mcl12Rksch - 50-52681F1
Fits any 3/4" openingSingle diodeDesigned for 12V SystemsMeets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedSealed, waterproof constructionPolycarbonate lens and housingHard wired, with separate ground wireSize: .74" x .74" x .90"
Seachoice 52671 Led 3/4" Mini Sealed Marker/Clearance Kitamber - Mcl12Aksch - 50-52671F1
Fits any 3/4" openingSingle diodeDesigned for 12V SystemsMeets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedSealed, waterproof constructionPolycarbonate lens and housingHard wired, with separate ground wireSize: .74" x .74" x .90"
Seachoice 51571 Led Thinline Sealed Stop/Turn/Tail Light - Stl69Rksch - 50-51571F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Sonically sealedPolycarbonate lens and housingMeets SAE S2T2I6 for over 80" wide vehicles and has built-in reflex meeting SAE AHard wired with separate ground wire
Seachoice 50-20361 Fuel Filter & Gasket For Gold-Flo Electronic Fuel Pump Kit - 20361 - 50-20361F1
Fuel Filter And Gasket - Gold-Flo®74 Micron. Made in U.S.A.
Seachoice 5-Flat To 7-Round Coil Cord Adaptor - A57Ccsch - 50-51591F1
Converts tow vehicle 7-way round blade connector to 5-way flat pin connector.
Seachoice 46361 62 Series Carbon Monoxide Detector, Flush Mount - 62-542-Wt - 50-46361 Superseded By: 270-62542Wtmarinetrf1
Space saving compact design for boats. Designed for the harsh marine environment. No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating. Alarm Mute button silences alarm while boat is ventilated. Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain. Memory Scan™ - Retains the CO level that activated the alarm. Micro Current Technology - Saves precious battery power in a boat. End of Life Signal alerts boater to replace the alarm after 5 years of service. Conforms to UL 2034 Marine Use and CSA 6.19-01.
Seachoice 40211 Hollow-Braid Polypropylene Anchor Line, White, 3/8" X 75' - 50-40211 - 50-40211F1
Hollow-braided polypropylene. Rot proof. Great for small boats and mushroom anchors. Galvanized-steel snap hook. Hollow-braided polypropyleneWaterproof, resists rotLow resistance to sunlightGreat for small boats and mushroom anchorsGalvanized-steel snap hook
Seachoice 40201 Hollow Braid Polypropylene Anchor Line, White, 1/4" X 50' - 40201 - 50-40201F1
Hollow-braided polypropylene. Rot proof. Great for small boats and mushroom anchors. Galvanized-steel snap hook. Hollow-braided polypropyleneWaterproof, resists rotLow resistance to sunlightGreat for small boats and mushroom anchorsGalvanized-steel snap hook
Seachoice 39201 Polypropylene Offshore Hatch - 10-3/8 Inch X 20-1/2 Inch Id - White - 39201 - 50-39201F1
Low-profile design Low-profile designUV-stabilized, acetone-resistant polypropylene constructionHatch lid features interior gasketIntegrated hinge system allows 180° openingFlush handle for easy accessMax. weight capacity: 350 lbs.#8 Fasteners required
Seachoice 39181 Polypropylene Offshore Hatch - 7-3/8 Inch X 11-1/8 Inch Id - White - 39181 - 50-39181F1
Low-profile design Low-profile designUV-stabilized, acetone-resistant polypropylene constructionHatch lid features interior gasketIntegrated hinge system allows 180° openingFlush handle for easy accessMax. weight capacity: 350 lbs.#8 Fasteners required
Seachoice 39141 Polypropylene 7" X 11" Id Hatch With Molded In 100 Degree Stainless Steel Hinge - 39141 - 50-39141F1
Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materials Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materialsHatch lid features interior gasketMax. weight capacity: 350 lbs.Requires #8 fasteners
Seachoice 39131 Polypropylene 7" X 11" Id Hatch With Molded In 100 Degree Stainless Steel Hinge - 39131 - 50-39131F1
Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materials Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materialsHatch lid features interior gasketMax. weight capacity: 350 lbs.Requires #8 fasteners
Seachoice 39121 Polypropylene 7" X 11" Id Pry-Out Type Hatch-White - 39121 - 50-39121F1
Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materials Durable, UV-stabilized polypropylene is resistant to acetone and other corrosive materialsHatch lid features interior gasketMax. weight capacity: 350 lbs.Requires #8 fasteners
Seachoice 30 Degree Plastic Rod Holder With Injection Molded Abs Flange - White - 50-89251 - 50-89251F1
Molded high impact plastic. Etched finish on flange. One-piece construction. Non-corrosive. Uses (3) fasteners #12 for installation.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant, Black With Assorted Sizes 1/8" To 1/2" X 3" (5 Per Pack) - 62201 - 50-62201F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature. Pack of assorted Sizes
Seachoice 3-To-1 Heat Shrink Tubing With Sealant 3/8" X 3", Assorted Colors (5 Per Pack) - 62191 - 50-62191F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature. Pack of assorted Colors
Seachoice 3-To-1 Heat Shrink Tubing With Sealant 3/4" X 3" Assorted Colors (4 Per Pack) - 62221 - 50-62221F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.Pack of assorted Colors
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 62621 - 50-62621F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 62611 - 50-62611F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 62601 - 50-62601F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61541 - 50-61541F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61531 - 50-61531F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61521 - 50-61521F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61511 - 50-61511F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
