Select Category
Engine & Fuel
Seachoice 2-Cycle Engine, Oil To Gas Measuring Container, 32 Oz., Wide Mouth Bottle - 21000 - 50-21000F1
This plastic, quart-size bottle lets you add the correct amount of 2-cycle (2-stroke) engine oil needed for the volume of gas in your gas can. Once you know the oil-to-gas ratio for your 2-cycle engine, simply fill your gas can (not included) with gas, then pour the oil into the Seachoice measuring container according to the amount of gas you pumped into the can, and finally, pour the oil from the Seachoice container into your gas can to mix. Gas volume marks on the container are in gallons and liters. Ideal for 100:1, 50:1, 40:1 and 24:1 ratios. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Measure the correct amount of 2-cycle engine oil every timeClear plastic bottle has gas-volume markings in liters and gallonsDetermines ratios for 100:1, 50:1, 40:1 and 24:1 oil-to-gas mixturesDesigned to prevent fouled plugs or seized engines caused by an incorrect amount of oil32-ounce capacity
Seachoice 19174 Large Filter Wrench, 3-1/4" - 3-7/8" - 191744 - 50-19174F1
High-quality steel construction with non-slip comfortable gripHandle swivels 180° to clear obstructions and makes it easy-to-turn in tight spots or hard-to-reach places1" wide band provides strong gripUnique yoke and link assembly allows a strong grip and prevents crushed filtersStudded band for a firm grip and non-slip removalPlated yoke and a blackened band resists rust, oxidation and corrosionFits most standard boat, car and truck filters
Seachoice 19173 Small Filter Wrench, 2-3/4" - 3-3/4" - 19173 - 50-19173F1
High-quality steel construction with non-slip comfortable gripHandle swivels 180° to clear obstructions and makes it easy-to-turn in tight spots or hard-to-reach places1" wide band provides strong gripUnique yoke and link assembly allows a strong grip and prevents crushed filtersStudded band for a firm grip and non-slip removalPlated yoke and a blackened band resists rust, oxidation and corrosionFits most standard boat, car and truck filters
Seachoice 17896 Impeller, F7 Series - 09-1028Bt-1Sc - 50-17896 Superseded By: 50-17789F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 17894 Impeller, F35 Series - 09-808B-1Sc - 50-17894 Superseded By: 50-17788F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 17893 Impeller, F5B Series - 09-1027B-10Sc - 50-17893 Superseded By: 50-17787F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 17799 Impeller, F5B - 09-1027B-1Sc - 50-17799 Superseded By: 50-17786F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 17798 Impeller, F4B Series - 09-810B-1Sc - 50-17798 Superseded By: 50-17784F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 17797 Impeller, F6B Series - 09-812B-1Sc - 50-17797 Superseded By: 50-17783F1
Maintains correct pressureLong service lifeMinimized swelling and fatigueExcellent self-priming abilityCorrect sizeProvides correct cooling flow for pump right at start-upWe strongly recommend that the impeller be replaced every year with a Seachoice original impeller to ensure a perfect fit. Remove the old impeller with slip joint pliers or impeller puller.
Seachoice 15441 Fuel Gauge, Black Bezel - 15441 - 50-15441F1
15501: Combination of 15421 and 15441. 15421: Fuel Gauge Sender: Adjustable depth from 6" to 27". Fits most tanks. Includes gasket. Resistance value 240 ohms (empty) to 33 ohms (full). 15441: Fuel Gauge: Black bezel low profile fuel gauge for 12V negative ground systems. Use in conjunction with Model 15421 fuel sender. Complete with light kit.
Seachoice 11831 3 Position Magneto Ignition Switch, 6 Wire - 11831 - 50-11831F1
3 Positions: Off - Ignition - Start. "Push to Choke." Includes two keys. Stem Width: 13/16"Ignition: 15 Amps @ 12VSolenoid: 30 Amps @ 12VChoke: 7 Amps @ 12V" 11831 Wires: Red = 12V+, Purple = ignition, Black/Magenta = ground, Black/Yellow = magneto, Yellow/Black = choke
Seachoice 11821 3 Position Magneto Ignition Switch, 6 Screw - 11821 - 50-11821F1
3 Positions: Off - Ignition - Start. "Push to Choke." Includes two keys. Stem Width: 13/16"Ignition: 15 Amps @ 12VSolenoid: 30 Amps @ 12VChoke: 7 Amps @ 12V"
Seachoice 11641 3 Position Heavy Duty Ignition Starter Switch - 50-11641 - 50-11641F1
3 Position: Off - Ignition - Start. 15A @ 12V DC. Chrome plated brass face nut and brass back-up nut.. Supplied with two keys. Stainless steel springs. 11621: Mounting stem 1-7/32"L, 13/16" - 24 thread dia. 11641: Mounting stem 1-7/16"L, 13/16" - 20 thread dia. Overall Dimensions: 3-1/4"L; 1-7/16
Seachoice 11621 3 Position Heavy Duty Ignition Starter Switch - 50-11621 - 50-11621F1
3 Position: Off - Ignition - Start. 15A @ 12V DC. Chrome plated brass face nut and brass back-up nut.. Supplied with two keys. Stainless steel springs. 11621: Mounting stem 1-7/32"L, 13/16" - 24 thread dia. 11641: Mounting stem 1-7/16"L, 13/16" - 20 thread dia. Overall Dimensions: 3-1/4"L; 1-7/16
Seachoice 10' Coiled Extension Cord - 15051 - 50-15051F1
10' Coiled Extension Cord, 12V
Seachoice 10 Micron Fuel/Water Separating Filter With See Thru Plastic Bowl For Outboards - 20931 - 50-20931 Superseded By: 50-22303F1
Reusable see-thru plastic bowl with drain, and 10 micron filter (20951).
Seachoice 1.980" Grease Caps (2 Per Pack) - 53631 - 50-53631F1
Steel caps for most common applicationused in bearing kits.
Sea-Lect Designs Flush Mount Rod Holder Kit (W/ Gasket & Hardware) - K325162-9 - 680-K3251629F1
Great way to add fishing rod storage to you kayak, boat or watercrafts, and features a 30 degree flush mount rod holder Great way to add fishing rod storage to you kayak, boat or watercrafts, and features a 30 degree flush mount rod holderConstructed of durable Injection Molded ABSKit includes flush mount rod holder (1), gasket w/ cap (1), rod holder leash fitting (1), 10-32 X 1-1/4" OH (3), 10-32 Nyloc nut (3), #10 flat washer (3), #10 well nut (3)A: 9-3/16" / B: 1-5/8" / C: 2-1/2" / D: 2-5/8"Rod Holder made in the USA (Everett, WA)!
Sea-Dog 5200211 Replacement Plug And Gasket, Pair - 520021-1 - 354-5200211F1
Replacement parts for 520010 & 520020 series drain plugs.
Sea-Dog 520021 Replacement Plug And Gasket - 520021 - 354-520021F1
Replacement parts for 520010 & 520020 series drain plugs.
Sea-Dog 4204871 Safety Ignition Kill Switch - 420487-1 - 354-4204871F1
Marine emergency cut-off Kill Switch attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. The ignition (gray cap) version functions in applications where the circuit is normally closed (complete) with lanyard clip in place on switch. When lanyard is pulled and clip is removed from switch, circuit is open (not complete), resulting in interruption of current to ignition and shutting off engine. Kill switches include a coiled lanyard that is approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 5/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use.
Sea-Dog 4203661 Switch 3 Position Polypropylene Ignition Switch W/Boot - 420366-1 - 354-4203661F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Short shaft fits panels up to 5/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4203651 Switch 3 Position Polypropylene Ignition Switch W/Boot - 420365-1 - 354-4203651F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Long shaft fits panels up to 1-1/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4203611 Switch 3 Position Polypropylene Ignition Switch W/O Boot - 420361-1 - 354-4203611F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Short shaft fits panels up to 5/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4203601 Switch 3 Position Polypropylene Ignition Switch W/O Boot - 420360-1 - 354-4203601F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Long shaft fits panels up to 1-1/8" thick. Functions: Off-Ignition-Start.
