Select Category
Engine & Fuel
Racor 500Ma10 Marine Turbine Fuel Filter/Water Separator W/Metal Shield, 10 Micron - 500Ma10 - 62-500Ma10F1
Turbine series filter assemblies are designed to be installed on the vacuum side of the fuel transfer pump for best efficiency and protect precision engine components from dirt, rust, algae, asphaltines, varnishes, and especially water. They remove contaminates from fuel using the following three stage process: Stage One: Separation as fuel enters the filter assembly, it moves through the centrifuge and spins off large solids and water droplets which fall to the bottom of the collection bowl. Stage Two: Coalescing small water droplets bead-up on the surface of the conical baffle and cartridge element. When heavy enough, they too fall to the bottom of the bowl. Stage Three: Filtration proprietary Aquabloc® II cartridge elements repel water and remove contaminants from fuel down to two micron (nominal). They are waterproof and effective longer then water absorbing elements.Turbine series filters are available in sizes to fit any application, are easy to service, are rated for 25psi max pressure, and feature a self-venting water drain. MA models are UL Listed and Coast Guard approved for use on boats for hire and commercial applications and use a metal bowl.
Racor 31871 Twin Pack Replacement Filter - 31871 - 62-31871F1
Product Features: Legendary Aquabloc®II, 2 micron filter media, removes up to 100% of free water and protects sensitive fuel system components from particulatesMeets or exceeds OEM requirementsCompatible with ethanol gasoline blends
Racor 2329930 Snapp Filter Assembly With Mounting Bracket For All Engines Up To 140 Hp - 23299-30 - 62-2329930F1
For E10 gasoline, diesel and bio-diesel. For small engines up to 26 gph. Easily install the permanent, pivoting bracket anywhere inside or outside the engine compartment, snap in filter and quick connect and your done. Filter changes are a Snap! When it is time for service simply snap in a new filter, no tools are needed. At less than 4" x 8" the Snapp allows for tight mounting locations and only 2.5" clearance is needed for service. Legendary Aquabloc® filter mediaClear bowl for instant inspectionSelf venting, quick turn drain for easy serviceSupplied quick disconnect fittingsDurable glass filled body will not rustPermanent, Stainless steel mounting bracket
Racor 2329910 Snapp Filter Assembly With Mounting Bracket For All Engines Up To 140 Hp - 23299-10 - 62-2329910F1
For E10 gasoline, diesel and bio-diesel. For small engines up to 26 gph. Easily install the permanent, pivoting bracket anywhere inside or outside the engine compartment, snap in filter and quick connect and your done. Filter changes are a Snap! When it is time for service simply snap in a new filter, no tools are needed. At less than 4" x 8" the Snapp allows for tight mounting locations and only 2.5" clearance is needed for service. Legendary Aquabloc® filter mediaClear bowl for instant inspectionSelf venting, quick turn drain for easy serviceSupplied quick disconnect fittingsDurable glass filled body will not rustPermanent, Stainless steel mounting bracket
Racor 2329902 Snapp Filter Assembly With Mounting Bracket For All Engines Up To 140 Hp - 23299-02 - 62-2329902F1
For E10 gasoline, diesel and bio-diesel. For small engines up to 26 gph. Easily install the permanent, pivoting bracket anywhere inside or outside the engine compartment, snap in filter and quick connect and your done. Filter changes are a Snap! When it is time for service simply snap in a new filter, no tools are needed. At less than 4" x 8" the Snapp allows for tight mounting locations and only 2.5" clearance is needed for service. Legendary Aquabloc® filter mediaClear bowl for instant inspectionSelf venting, quick turn drain for easy serviceSupplied quick disconnect fittingsDurable glass filled body will not rustPermanent, Stainless steel mounting bracket
Racor 2040V30 Replacement Element For Turbine Fuel Filter/Water Seperators - 2040V-30 - 62-2040V30F1
Waterproof, rustproof, dirtproof. Engineered to repel water and remove solid contaminants before they can damage precision engine components. Racor Aquabloc elements are available in different lengths for various flow rates and color coded for 2, 10 and 30 microns. The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating.S = Secondary/Final 2 micron (Brown end cap)T = Primary or Secondary/Final 10 micron (Blue end cap)P = Primary 30 micron (Red end cap)
Racor 2040V2 Replacement Element For Turbine Fuel Filter/Water Seperators - 2040V-02 - 62-2040V2F1
Waterproof, rustproof, dirtproof. Engineered to repel water and remove solid contaminants before they can damage precision engine components. Racor Aquabloc elements are available in different lengths for various flow rates and color coded for 2, 10 and 30 microns. The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating.S = Secondary/Final 2 micron (Brown end cap)T = Primary or Secondary/Final 10 micron (Blue end cap)P = Primary 30 micron (Red end cap)
Racor 2040V10 Replacement Element For Turbine Fuel Filter/Water Seperators - 2040V-10 - 62-2040V10F1
Waterproof, rustproof, dirtproof. Engineered to repel water and remove solid contaminants before they can damage precision engine components. Racor Aquabloc elements are available in different lengths for various flow rates and color coded for 2, 10 and 30 microns. The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating.S = Secondary/Final 2 micron (Brown end cap)T = Primary or Secondary/Final 10 micron (Blue end cap)P = Primary 30 micron (Red end cap)
Racor 2020V30 Replacement Element For Turbine Fuel Filter/Water Seperators - 2020-V30 - 62-2020V30F1
Waterproof, rustproof, dirtproof. Engineered to repel water and remove solid contaminants before they can damage precision engine components. Racor Aquabloc elements are available in different lengths for various flow rates and color coded for 2, 10 and 30 microns. The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating.S = Secondary/Final 2 micron (Brown end cap)T = Primary or Secondary/Final 10 micron (Blue end cap)P = Primary 30 micron (Red end cap)
Racor 2020V2 Replacement Element For Turbine Fuel Filter/Water Seperators - 2020V-02 - 62-2020V2F1
Waterproof, rustproof, dirtproof. Engineered to repel water and remove solid contaminants before they can damage precision engine components. Racor Aquabloc elements are available in different lengths for various flow rates and color coded for 2, 10 and 30 microns. The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating.S = Secondary/Final 2 micron (Brown end cap)T = Primary or Secondary/Final 10 micron (Blue end cap)P = Primary 30 micron (Red end cap)
Racor 2020V10 Replacement Element For Turbine Fuel Filter/Water Seperators - 2020V-10 - 62-2020V10F1
Waterproof, rustproof, dirtproof. Engineered to repel water and remove solid contaminants before they can damage precision engine components. Racor Aquabloc elements are available in different lengths for various flow rates and color coded for 2, 10 and 30 microns. The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating.S = Secondary/Final 2 micron (Brown end cap)T = Primary or Secondary/Final 10 micron (Blue end cap)P = Primary 30 micron (Red end cap)
Racor 2 Micron Diesel Spin-On Fuel/Water Seperator, 45 Gph - 245R2 - 62-245R2F1
The 200 series fuel filter/water separators feature a Spin-On, high capacity Aquabloc® II replaceable filter element which separates water, and removes solid contamination. All models are standard with 1/4"-18 NPTF inlet and outlet fuel ports. An integral priming pump and a new see-thru contaminant bowl can operate in applications up to 30 PSI. The see through bowls use with these models witll not discolor from alcohol, additives, or UV light and have a leak proof, positive seal, self-venting drain for easy servicing.
Racor 2 Micron Diesel Spin-On Fuel/Water Seperator, 30 Gph - 230R2 - 62-230R2F1
The 200 series fuel filter/water separators feature a Spin-On, high capacity Aquabloc® II replaceable filter element which separates water, and removes solid contamination. All models are standard with 1/4"-18 NPTF inlet and outlet fuel ports. An integral priming pump and a new see-thru contaminant bowl can operate in applications up to 30 PSI. The see through bowls use with these models witll not discolor from alcohol, additives, or UV light and have a leak proof, positive seal, self-venting drain for easy servicing.
Racor 1000Vma10 Marine Turbine Fuel Filter/Water Separator W/Metal Shield, 10 Micron - 1000Vma10 - 62-1000Vma10F1
Turbine series filter assemblies are designed to be installed on the vacuum side of the fuel transfer pump for best efficiency and protect precision engine components from dirt, rust, algae, asphaltines, varnishes, and especially water. They remove contaminates from fuel using the following three stage process: Stage One: Separation as fuel enters the filter assembly, it moves through the centrifuge and spins off large solids and water droplets which fall to the bottom of the collection bowl. Stage Two: Coalescing small water droplets bead-up on the surface of the conical baffle and cartridge element. When heavy enough, they too fall to the bottom of the bowl. Stage Three: Filtration proprietary Aquabloc® II cartridge elements repel water and remove contaminants from fuel down to two micron (nominal). They are waterproof and effective longer then water absorbing elements.Turbine series filters are available in sizes to fit any application, are easy to service, are rated for 25psi max pressure, and feature a self-venting water drain. FG & FH models offer a clear, see-thru bowl.
Racor 1000Fv10 Marine Turbine Fuel Filter/Water Separator W/Clear Bowl, 10 Micron - 1000Fv10 - 62-1000Fv10F1
Turbine series filter assemblies are designed to be installed on the vacuum side of the fuel transfer pump for best efficiency and protect precision engine components from dirt, rust, algae, asphaltines, varnishes, and especially water. They remove contaminates from fuel using the following three stage process: Stage One: Separation as fuel enters the filter assembly, it moves through the centrifuge and spins off large solids and water droplets which fall to the bottom of the collection bowl. Stage Two: Coalescing small water droplets bead-up on the surface of the conical baffle and cartridge element. When heavy enough, they too fall to the bottom of the bowl. Stage Three: Filtration proprietary Aquabloc® II cartridge elements repel water and remove contaminants from fuel down to two micron (nominal). They are waterproof and effective longer then water absorbing elements.Turbine series filters are available in sizes to fit any application, are easy to service, are rated for 25psi max pressure, and feature a self-venting water drain. FG & FH models offer a clear, see-thru bowl.
Racor 10 Micron Gas Spin-On Fuel/Water Seperator With Metal Bowl For Inboard/Outboard - 660R-Rac-02 - 62-660Rrac02F1
Spin-On series filters these filters are designed for high performance applications, and with flow rates between 30 and 120 GPH your engine will perform better than ever with clean, waterfree fuel. These filters are coated with a durable electrostatically applied powder coating for superior corrosion resistance. Features a high capacity Aquabloc® II 10 micron filter element that removes sediment from water up to 99%. This Spin-On filter design is simple to replace and the re-usable clear plastic or metal contaminant collection bowls feature a self-venting drain, or metal plug, for removing unwanted muck and water. Max pressure 7 psi.Metal Bowls: USCG regulations require the use of flame resistant metal bowls below deck.
Racor 10 Micron Gas Spin-On Fuel/Water Seperator With Metal Bowl For Inboard/Outboard - 320R-Rac-02 - 62-320Rrac02F1
Spin-On series filters these filters are designed for high performance applications, and with flow rates between 30 and 120 GPH your engine will perform better than ever with clean, waterfree fuel. These filters are coated with a durable electrostatically applied powder coating for superior corrosion resistance. Features a high capacity Aquabloc® II 10 micron filter element that removes sediment from water up to 99%. This Spin-On filter design is simple to replace and the re-usable clear plastic or metal contaminant collection bowls feature a self-venting drain, or metal plug, for removing unwanted muck and water. Max pressure 7 psi.Metal Bowls: USCG regulations require the use of flame resistant metal bowls below deck.
Racor 10 Micron Gas Spin-On Fuel/Water Seperator With Clear Bowl For Outboards - 660R-Rac-01 - 62-660Rrac01F1
Spin-On series filters these filters are designed for high performance applications, and with flow rates between 30 and 120 GPH your engine will perform better than ever with clean, waterfree fuel. These filters are coated with a durable electrostatically applied powder coating for superior corrosion resistance. Features a high capacity Aquabloc® II 10 micron filter element that removes sediment from water up to 99%. This Spin-On filter design is simple to replace and the re-usable clear plastic or metal contaminant collection bowls feature a self-venting drain, or metal plug, for removing unwanted muck and water. Max pressure 7 psi.Clear Bowls: Use for outboard and above deck installations.
Racor 10 Micron Gas Spin-On Fuel/Water Seperator With Clear Bowl For Outboards - 320R-Rac-01 - 62-320Rrac01F1
Spin-On series filters these filters are designed for high performance applications, and with flow rates between 30 and 120 GPH your engine will perform better than ever with clean, waterfree fuel. These filters are coated with a durable electrostatically applied powder coating for superior corrosion resistance. Features a high capacity Aquabloc® II 10 micron filter element that removes sediment from water up to 99%. This Spin-On filter design is simple to replace and the re-usable clear plastic or metal contaminant collection bowls feature a self-venting drain, or metal plug, for removing unwanted muck and water. Max pressure 7 psi.Clear Bowls: Use for outboard and above deck installations.
Racor 10 Micron Gas Spin-On Fuel/Water Seperator With Clear Bowl For Outboards - 120R-Rac-01 - 62-120Rrac01F1
Spin-On series filters these filters are designed for high performance applications, and with flow rates between 30 and 120 GPH your engine will perform better than ever with clean, waterfree fuel. These filters are coated with a durable electrostatically applied powder coating for superior corrosion resistance. Features a high capacity Aquabloc® II 10 micron filter element that removes sediment from water up to 99%. This Spin-On filter design is simple to replace and the re-usable clear plastic or metal contaminant collection bowls feature a self-venting drain, or metal plug, for removing unwanted muck and water. Max pressure 7 psi.Clear Bowls: Use for outboard and above deck installations.
Racor 10 Micron Diesel Spin-On Fuel/Water Seperator, 30 Gph - 230R10 - 62-230R10F1
The 200 series fuel filter/water separators feature a Spin-On, high capacity Aquabloc® II replaceable filter element which separates water, and removes solid contamination. All models are standard with 1/4"-18 NPTF inlet and outlet fuel ports. An integral priming pump and a new see-thru contaminant bowl can operate in applications up to 30 PSI. The see through bowls use with these models witll not discolor from alcohol, additives, or UV light and have a leak proof, positive seal, self-venting drain for easy servicing.
Racor 10 Micron Diesel Spin-On Fuel/Water Seperator, 15 Gph - 215R10 - 62-215R10F1
The 200 series fuel filter/water separators feature a Spin-On, high capacity Aquabloc® II replaceable filter element which separates water, and removes solid contamination. All models are standard with 1/4"-18 NPTF inlet and outlet fuel ports. An integral priming pump and a new see-thru contaminant bowl can operate in applications up to 30 PSI. The see through bowls use with these models witll not discolor from alcohol, additives, or UV light and have a leak proof, positive seal, self-venting drain for easy servicing.
Quickstor 92-8M0058683 Fuel System Treatment & Stabilizer, Gal. @4 - 8M0058683 - 710-92-8M0058683F1
Quickstor should be added to fuel before long-term boat storage to prevent regular and ethanol-blended fuel from breaking down and oxidizing as well as preventing fuel system corrosion. Quickstor stabilizes fuel for up to a year and keeps injectors and carburetors lubricated with all grades of gasoline including ethanol blends. Use in 2-cycle and 4-cycle gasoline engines. Safe for catalyzed engines.Sold in case pack only.
Quickstor 92-8M0058682 Fuel System Treatment & Stabilizer, 32 Oz. @ 6 - 8M0058682 - 710-92-8M0058682F1
Quickstor should be added to fuel before long-term boat storage to prevent regular and ethanol-blended fuel from breaking down and oxidizing as well as preventing fuel system corrosion. Quickstor stabilizes fuel for up to a year and keeps injectors and carburetors lubricated with all grades of gasoline including ethanol blends. Use in 2-cycle and 4-cycle gasoline engines. Safe for catalyzed engines. Sold in case pack only.
Quickstor 92-8M0048202 Fuel System Treatment & Stabilizer, 12 Oz. @12 - - 710-92-8M0048202F1
Quickstor should be added to fuel before long-term boat storage to prevent regular and ethanol-blended fuel from breaking down and oxidizing as well as preventing fuel system corrosion. Quickstor stabilizes fuel for up to a year and keeps injectors and carburetors lubricated with all grades of gasoline including ethanol blends. Use in 2-cycle and 4-cycle gasoline engines. Safe for catalyzed engines. Sold in case pack only.
