Pulley Driven Engine Cooling Pump - 2620-1101 - 6-26201101F1

Self priming flexible impeller pump. Ideal for engine cooling, washdown, circulation and other general purposes. Corrosion resistant bronze bodies and stainless shafts are well suited for marine environments. Permanently lubricated ball bearings.

Ptef® Trailer Hitch Lubricant - 85804 - 74-85804F1

The best protection for trailer hitches. Impervious to fresh or salt water. Protects from -65°F to +65°F with super adhesion, it will not wash off or break down and is non-toxic, non-staining.

Pss Shaft Seal Tee Replaces P/N 730-07Kit112 - 07Kit112 - 752-07Kit112F1

Pss Seal 2-1/2"Shaft X 4"Log Replaces P/N 730-02212400 - 2212400 - 752-02212400F1

Pss Pss Maintenance Kit, 2" Shaft - 07200314R - 752-07200314Rf1

As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. PYI suggests preventative maintenance. The PSS bellow should be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced. Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater. Available for shafts from 3/4" to 3-3/4". Includes (1) Bellow, (2) o-rings, (5) Set screws, (4) Hose clamps, (1) Tube of thread lock, (1) Allen key

Pss Pss Maintenance Kit, 1-1/8" Shaft - 07118200R - 752-07118200Rf1

As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. PYI suggests preventative maintenance. The PSS bellow should be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced. Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater. Available for shafts from 3/4" to 3-3/4". Includes (1) Bellow, (2) o-rings, (5) Set screws, (4) Hose clamps, (1) Tube of thread lock, (1) Allen key

Pss Pss Maintenance Kit, 1-1/4" Shaft - 07114214R - 752-07114214Rf1

As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. PYI suggests preventative maintenance. The PSS bellow should be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced. Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater. Available for shafts from 3/4" to 3-3/4". Includes (1) Bellow, (2) o-rings, (5) Set screws, (4) Hose clamps, (1) Tube of thread lock, (1) Allen key

Pss Maintenance Kit Replaces P/N 730-07138214R - 07138214R - 752-07138214Rf1

Pss Kit Maintenance Replaces P/N 730-07118112R - 07118112R - 752-07118112Rf1

Pss Kit Maintenance Replaces P/N 730-07114234R - 07114234R - 752-07114234Rf1

Pss Kit Maintenance Replaces P/N 730-07114134R - 07114134R - 752-07114134Rf1

Pss Kit Maintenance 2-1/2" X 4 Replaces P/N 730-07212400R - 07212400R - 752-07212400Rf1

Pss Kit Maintenance 1-3/4"X 22 Replaces P/N 730-07134214R - 07134214R - 752-07134214Rf1

Pss 7/8" Shaft X 2"-2.25" Log Replaces P/N 730-02078200 - 2078200 - 752-02078200F1

Pss 30Mm Shaft X 1.75" Log Replaces P/N 730-0230M134 - 0230M134 - 752-0230M134F1

Pss 2 1/4"Shaft X3.25-3.5"Log Replaces P/N 730-02214314 - 2214314 - 752-02214314F1

Pss 1 3/4"Shaft X 2.25-2.5"Log Replaces P/N 730-02134214 - 2134214 - 752-02134214F1

Pss 1 1/2"Shaft X 2" &2.25"Log Removable Bushing Pmg Replaces P/N 730-02112200 - 2112200 - 752-02112200F1

Pss 07N118 O-Ring Kit, 1-1/8" Shaft - 07N118 - 752-07N118F1

Over time you may find that you need to replace the O-rings inside the stainless steel rotor of your PSS Shaft Seal. This kit comes with everything you need to get the job done. Includes: Allen wrench, (5) Set screws, (2) O-rings, (4) Clamp Jackets, Thread lock.

Pss 07N114 O-Ring Kit, 1-1/4" Shaft - 07N114 - 752-07N114F1

Over time you may find that you need to replace the O-rings inside the stainless steel rotor of your PSS Shaft Seal. This kit comes with everything you need to get the job done. Includes: Allen wrench, (5) Set screws, (2) O-rings, (4) Clamp Jackets, Thread lock.

Pss 07N112 O-Ring Kit, 1-1/2" Shaft - 07N112 - 752-07N112F1

Over time you may find that you need to replace the O-rings inside the stainless steel rotor of your PSS Shaft Seal. This kit comes with everything you need to get the job done. Includes: Allen wrench, (5) Set screws, (2) O-rings, (4) Clamp Jackets, Thread lock.

Pss 07N100 O-Ring Kit, 1" Shaft - 07N100 - 752-07N100F1

Over time you may find that you need to replace the O-rings inside the stainless steel rotor of your PSS Shaft Seal. This kit comes with everything you need to get the job done. Includes: Allen wrench, (5) Set screws, (2) O-rings, (4) Clamp Jackets, Thread lock.

Pss 07112234Rpss Maintenance Kit, 1-1/2" Shaft - 07112234R - 752-07112234Rf1

As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. PYI suggests preventative maintenance. The PSS bellow should be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced. Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater. Available for shafts from 3/4" to 3-3/4". Includes (1) Bellow, (2) o-rings, (5) Set screws, (4) Hose clamps, (1) Tube of thread lock, (1) Allen key

Pss 07112214R Pss Maintenance Kit, 1-1/2" Shaft - 07112214R - 752-07112214Rf1

As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. PYI suggests preventative maintenance. The PSS bellow should be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced. Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater. Available for shafts from 3/4" to 3-3/4". Includes (1) Bellow, (2) o-rings, (5) Set screws, (4) Hose clamps, (1) Tube of thread lock, (1) Allen key

Pss 07100200R Pss Maintenance Kit, 1" Shaft - 07100200R - 752-07100200Rf1

As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. PYI suggests preventative maintenance. The PSS bellow should be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced. Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater. Available for shafts from 3/4" to 3-3/4". Includes (1) Bellow, (2) o-rings, (5) Set screws, (4) Hose clamps, (1) Tube of thread lock, (1) Allen key