Select Category
Engine & Fuel
Awl-Prep Wax & Grease Remover, Gal. - Ot0115/1Glus - 98-T0115Gf1
T0008 - Use to wipe down final primed or topcoated surfaces before and after sanding.T0115 - Use to remove wax residue and grease from substrates. Do not use on freshly painted surfaces.T0170 - Slow evaporating, use to wipe down finish primers and topcoats.
Aviaton Form-A-Gasket - 80019 - 180-80019F1
Aviation Form-A-Gasket no. 3 sealant liquid. Holds gaskets in place while making assembly. Brush on formula that dries slowly to a pliable film for easy disassembly. Resists common shop fluids and fuels.
Auto Prop Anode - H5 - 70-H5F1
Auto Prop Propeller Nut Anodes w/Nylon Inserts
Attwood Universal Fuel Connector 90 Degree Male Elbow 1/4" Npt - 2552103 - 23-88876F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use teflon tape on all threads.
Attwood Replacement Cover For 1670 Fuel Tank Vent - 911526-1 - 23-9115261F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
Attwood Polypropylene Double Ended Thru-Hull Connection For 3/4" Hose - 722511 - 23-38783F1
Double-ended thru-hull provides watertight transition through bulkheads or tanks. 5" overall length. Polypropylene construction.Note: Thru-Hull connectors are designed for installation above the water line only
Attwood Hollow Braid Polypropylene Anchor Line W/Hook, 1/4" X 50' White - 11714-2 - 23-117142F1
Solid braided nylon offers a rope that has a strong round cord that will not flatten out which stays flexible throughout its life and have a soft hand. All polypropylene fibers are UV stabilized to provide resistance to fading and degradation from the sun's ultraviolet rays. It floats and is resistant to rot, oils, gasoline and most chemicals.
Attwood Fuel Tank Vent Standard Mount For 5/8" Hose 90 Degree Stainless Steel - 66419-3 - 23-664193F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
Attwood Fuel Tank Vent Flush Mount 90 Degree - 66032-3 - 23-660323F1
316 Stainless Steel. On the exterior, they have a smooth edge over the competition. There is no protruding cap to cause damage- or be damaged by- hull bumps or scrapes. Cap unscrews with hex head wrench for easy cleaning of filter and pressure testing of entire fuel system. Includes two silicone gaskets.
Attwood Fuel Tank Vent Flush Mount - Straight - 66031-3 - 23-660313F1
316 Stainless Steel. On the exterior, they have a smooth edge over the competition. There is no protruding cap to cause damage- or be damaged by- hull bumps or scrapes. Cap unscrews with hex head wrench for easy cleaning of filter and pressure testing of entire fuel system. Includes two silicone gaskets.
Attwood Fuel Tank Vent Black - 1607-3 - 23-16073F1
Patented splash-resistant, corrosion-resistant polypropylene. Meets ABYC ventilation specifications. All Attwood fuel tank vents meet or exceed U.S. Coast Guard regulations.
Attwood Fuel Tank Vent 90 Degree Standard Mount For 5/8" Hose White - 1671-1 - 23-16711F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
Attwood Fuel Tank Vent 90 Degree Standard Mount For 5/8" Hose Black - 1670-3 - 23-16703F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
Attwood Fuel Tank Vent 90 Degree Flush Mount For 5/8" Hose Stainless Steel - 1674-6 - 23-16746F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
Attwood Fuel Line Surge Protector For 5/8" Hose - 1675-6 - 23-16756F1
Meets ABYC Standards. Helps avoid fuel spills because the surge helps automatic fuel nozzles shut off as the tank fills. Glass-filled polypropylene construction and surge-ball design. Withstands oil, gas, and alcohol-blended fuels. Compact size allows installation inside gunwale in any orientation within 45° of vertical. Includes two hose clamps.
Attwood Fuel Line Hose Kit With Universal Sprayless Connector For Mercury Pre 1998 3/8" X 6' - 93806Aus7 - 23-93806Aus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Attwood Fuel Line Hose Kit With Universal Sprayless Connector For Honda 3/8" X 6' - 93806Hus7 - 23-93806Hus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Attwood Fuel Line Hose Kit With Universal Sprayless Connector For Force 3/8" X 6' - 93806Fus7 - 23-93806Fus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Attwood Fuel Line Hose Kit Universal 3/8" X 6' With Fuel Demand Valve And Sprayless Connector - 93806Uusd7 - 23-93806Uusd7F1
EPA COMPLIANT/CARB CERTIFIEDFuel kit with Attwood multi-layer primer bulb, fuel demand valve and universal sprayless connector. Multi-layer primer bulb prevents evaporation of fuel saving gas and money. Fuel demand valve prevents engine flooding due to pressurized fuel. Universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male ¼" NPT tank connector for use with all marine fuel tanks. Low-permeation hose is ethanol and alcohol compatible and is rated for use up to 100°C.
Attwood Fuel Line Hose Kit 3/8" X 6' With Fuel Demand Valve And Sprayless Connector For Mercury - 93806Musd7 - 23-93806Musd7F1
EPA COMPLIANT/CARB CERTIFIEDFuel kit with Attwood multi-layer primer bulb, fuel demand valve and universal sprayless connector. Multi-layer primer bulb prevents evaporation of fuel saving gas and money. Fuel demand valve prevents engine flooding due to pressurized fuel. Universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male ¼" NPT tank connector for use with all marine fuel tanks. Low-permeation hose is ethanol and alcohol compatible and is rated for use up to 100°C.
Attwood Fuel Line Hose Kit 3/8" X 6' With Fuel Demand Valve And Sprayless Connector For Evinrude - 93806Eusd7 - 23-93806Eusd7F1
EPA COMPLIANT/CARB CERTIFIEDFuel kit with Attwood multi-layer primer bulb, fuel demand valve and universal sprayless connector. Multi-layer primer bulb prevents evaporation of fuel saving gas and money. Fuel demand valve prevents engine flooding due to pressurized fuel. Universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male ¼" NPT tank connector for use with all marine fuel tanks. Low-permeation hose is ethanol and alcohol compatible and is rated for use up to 100°C.
Attwood Fuel Connector Universal, Brass For 3/8" Hose, 1/4" Npt - 14540-6 - 23-145406F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use teflon tape on all threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Attwood Fuel Connector For Mercury/Mariner Die Cast Zinc 3/8" Barb - 14534-6 - 23-145346F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Mercury/Mariner Die Cast Zinc 1/4" Npt - 14530-6 - 23-145306F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Honda Nickel Plated Brass 3/8" Barb - 2557581 - 23-89026F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
