Fuel System
Seachoice Cube Electronic Fuel Pump, 9-11.5 Psi, 12 Volt Systems - 20321 - 50-20321F1
This Seachoice Cube® Electronic Fuel Pump Kit features premium construction and engineering to ensure it provides the surest fuel delivery possible. This versatile Fuel Pump is compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additives, so it will work for the widest variety of applications. This Fuel Pump features a reliable, solid-state design for a longer service life. It is self-regulating and self-priming, and it has an internal check valve. It also has a built-in anti-siphon valve, transient protection, and a 74-micron filter to prevent impurities from passing through the fuel system. Designed for 12 volt systems only, this Fuel Pump installs easily. It is Coast Guard ignition test approved, and UL (574A) Certified. It is rated for 96 inches lift, 11.5-9.0 psi, and 32 gph. This OEM #40185 Fuel Pump has a 1/8 inch x 27 thread. Not intended for aircraft use. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Premium construction and engineering ensure the surest fuel delivery possibleVersatile Fuel Pump works with wide variety of applications, is compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additivesSelf-regulating and self-priming, has an internal check valve, built-in anti-siphon valve, transient protectionRated for 96 inches lift, 11.5-9.0 psi, and 32 gph, and has a 74-micron filterHas a 1/8 inch x 27 threadDesigned for 12 volt systems only, installs easily, is Coast Guard ignition test approved and UL (574A) CertifiedNot intended for aircraft useInternal check valve, self-primingReliable solid state design provides longer lifeMade in U.S.A by FACET.
Seachoice Cube Electronic Fuel Pump, 3.5-5 Psi, 12 Volt Systems - 20311 - 50-20311F1
This Seachoice Cube® Electronic Fuel Pump Kit features premium construction and engineering to ensure it provides the surest fuel delivery possible. This versatile Fuel Pump is compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additives, so it will work for the widest variety of applications. This Fuel Pump features a reliable, solid-state design for a longer service life. It is self-regulating and self-priming, and it has an internal check valve. It also has a built-in anti-siphon valve, transient protection, and a 74-micron filter to prevent impurities from passing through the fuel system. Designed for 12 volt systems only, this Fuel Pump installs easily. It is Coast Guard ignition test approved, and UL (574A) Certified. It is rated for 60 inches lift, 5.0-3.5 psi, and 19 gph. This OEM #40176 Fuel Pump has a 1/8 inch x 27 thread. Not intended for aircraft use. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Premium construction and engineering ensure the surest fuel delivery possibleVersatile Fuel Pump works with wide variety of applications, is compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additivesSelf-regulating and self-priming, has an internal check valve, built-in anti-siphon valve, transient protectionRated for 60 inches lift, 5.0-3.5 psi, and 19 gph, and has a 74-micron filterHas a 1/8 inch x 27 threadDesigned for 12 volt systems only, installs easily, is Coast Guard ignition test approved and UL (574A) CertifiedNot intended for aircraft useInternal check valve, self-primingReliable solid state design provides longer lifeMade in U.S.A by FACET.
Seachoice Cube Electronic Fuel Pump, 3-4.5 Psi, 12 Volt Systems - 20341 - 50-20341F1
This Seachoice Cube® Electronic Fuel Pump Kit features premium construction and engineering to ensure it provides the surest fuel delivery possible. This versatile Fuel Pump is compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additives, so it will work for the widest variety of applications. This Fuel Pump features a reliable, solid-state design for a longer service life. It is self-regulating and self-priming, and it has an internal check valve. It also has a built-in anti-siphon valve, transient protection, and a 74-micron filter to prevent impurities from passing through the fuel system. Designed for 12 volt systems only, this Fuel Pump installs easily. It is Coast Guard ignition test approved, and UL (574A) Certified. It is rated for 60 inches lift, 4.5-3.0 psi, and 30 gph. This OEM #40288 Fuel Pump has a 1/8 inch x 27 thread. Not intended for aircraft use. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Premium construction and engineering ensure the surest fuel delivery possibleVersatile Fuel Pump works with wide variety of applications, is compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additivesSelf-regulating and self-priming, has an internal check valve, built-in anti-siphon valve, transient protectionRated for 60 inches lift, 4.5-3.0 psi, and 30 gph, and has a 74-micron filterHas a 1/8 inch x 27 threadDesigned for 12 volt systems only, installs easily, is Coast Guard ignition test approved and UL (574A) CertifiedNot intended for aircraft useInternal check valve, self-primingReliable solid state design provides longer lifeMade in U.S.A by FACET.
Seachoice Brass Two Way Fuel Line Valve - 50-20741 - 50-20741F1
Brass Two Way Fuel Line Valve, 3/8 x 3/8 Female/Female NOT TO BE USED IN POTABLE WATER SYSTEMS.
Seachoice Brass Two Way Fuel Line Valve - 50-20731 - 50-20731F1
Brass Two Way Fuel Line Valve, 1/4 x 1/4 Female/Female
Seachoice Brass Two Way Fuel Line Valve - 50-20721 - 50-20721F1
Brass Two Way Fuel Line Valve, 1/4 x 1/4 Male/Female
Seachoice Brass Three Way Fuel Line Valve - 50-20761 - 50-20761F1
Female ports BrassPositive lock with audible click NOT TO BE USED IN POTABLE WATER SYSTEMS.
Seachoice Brass Three Way Fuel Line Valve - 50-20751 - 50-20751F1
Female ports BrassPositive lock with audible click
Seachoice Boat Fuel Gauge Kit, Includes Gauge And In-Tank Equipment - 50-15501 - 50-15501F1
This Seachoice Fuel Gauge Kit has everything you need to equip a boat with a fuel gauge and the in-tank equipment that will monitor fuel levels. This versatile kit can be used for gas or diesel. Made of non-ferrous materials, the tank equipment can be used with tanks ranging in depth from 6 inches to 27 inches. The mounting screws and gasket are included for sure installation, and the float arm can be rotated in 90° intervals to ensure that there's clearance with tank walls or baffles. The low-profile Fuel Gauge for 12V negative ground systems has a black bezel and a light kit so the fuel level is always visible. Not for dual station applications. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Can be used with petrol or dieselCombination of references 15421 and 15441Seachoice
Seachoice Black Poly Carb Deck Plate Key For 1-1/4" And 1-1/2" Deck Plates - 50-32651 - 50-32651F1
Black poly carb. Will fit 1-1/4" and 1-1/2" deck plates. Overall length: 3-3/8".
Seachoice 91989 Wet/Dry Silicone Carbide Paper, Grade: 2000 - 91989 - 50-91989F1
This great general purpose, silicon carbide sheet can be used wet or dry, prevents loading when sanding.
Seachoice 91988 Wet/Dry Silicone Carbide Paper, Grade: 1500 - 91988 - 50-91988F1
This great general purpose, silicon carbide sheet can be used wet or dry, prevents loading when sanding.
Seachoice 91987 Wet/Dry Silicone Carbide Paper, Grade: 1200 - 91987 - 50-91987F1
This great general purpose, silicon carbide sheet can be used wet or dry, prevents loading when sanding.
Seachoice 91986 Wet/Dry Silicone Carbide Paper, Grade: 1000 - 91986 - 50-91986F1
This great general purpose, silicon carbide sheet can be used wet or dry, prevents loading when sanding.
Seachoice 46361 62 Series Carbon Monoxide Detector, Flush Mount - 62-542-Wt - 50-46361 Superseded By: 270-62542Wtmarinetrf1
Space saving compact design for boats. Designed for the harsh marine environment. No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating. Alarm Mute button silences alarm while boat is ventilated. Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain. Memory Scan™ - Retains the CO level that activated the alarm. Micro Current Technology - Saves precious battery power in a boat. End of Life Signal alerts boater to replace the alarm after 5 years of service. Conforms to UL 2034 Marine Use and CSA 6.19-01.
Seachoice 30 Degree Plastic Rod Holder With Injection Molded Abs Flange - White - 50-89251 - 50-89251F1
Molded high impact plastic. Etched finish on flange. One-piece construction. Non-corrosive. Uses (3) fasteners #12 for installation.
Seachoice 23751 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 3/8" X 50' - 365-0386 - 50-23751F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23750 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 3/8" X 250' - 365-0380 - 50-23750F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23749 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 3/8" X 25' - 365-0385 - 50-23749F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23748 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 5/16" X 50' Length - 365-0566 - 50-23748F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23747 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 5/16" X 25' Length - 365-0565 - 50-23747F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23746 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 1/4" X 50' Length - 365-0146 - 50-23746F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23744 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 1/4" I.D., 25' Length - 365-0145 - 50-23744F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23743 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 1/2" X 50' - 365-0126 - 50-23743F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
Seachoice 23741 Type A1/B1-15/10 Low-Permeation Fuel Hose, 365 Series, 1/2" X 25' - 365-0125 - 50-23741F1
Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C).
