Fuel System
Omc Johnson/Evinrude 1/8" Fuel Hose, 50' - 18-8051 - 47-8051F1
Made from an alcohol resistant compound. Note: Product is for repair and replacement on boats manufactured prior to January 1, 2009, intended for use in U.S. Refer to EPA / CARB standards for specific details. International standards may vary.
Older Mercarb 2 Bbl Repair Kit Older Mercarb W/Bottom Fill S/S<3302-9437 - 804845 - 710-3302-804845F1
Oil & Fuel Absorbent Bilge Pillow - 29026 - 71-29026F1
Toss it in the bilge, and it soaks up oil and gasoline, but repels water. The bilge water can then be pumped overboard legally.
Moeller Universal Fuel Level Sender With Diesel Return For Tank Depth 6 To 24" (Requires Dash Mounted Gauge) - 035789-10 - 114-03578910F1
Designed for top mounting in aluminum, plastic or stainless steel fuel tanks in all types of marine vessels. All stainless steel construction resists corrosion and is ethanol compliant. Meets and exceeds current NMMA and ABYC specifications. SS 1/4" NPT female thread with 3/8" barb. 1/4" ground spade terminal. Pre-bent 90 degree float arm.
Moeller Fuel Pick-Up With 1/4" Npt Aluminum Fitting And 3/8" Id Nylon Tubing - 033500-24 - 114-03350024F1
Aluminum fitting 3/8" I.D. Nylon tubing is chemical resistantOEM replacement24" tube can be cut to length
Moeller Fuel Pick-Up With 1/4" Npt Aluminum Fitting And 3/8" Id Nylon Tubing - 033500-12 - 114-03350012F1
Aluminum fitting 3/8" I.D. Nylon tubing is chemical resistantOEM replacement12" tube can be cut to length
Moeller Fuel Pick-Up With 1/4" Npt Aluminum Fitting And 3/8" Id Nylon Tubing - 033100-24 - 114-03310024F1
Aluminum fitting 3/8" I.D. Nylon tubing is chemical resistantOEM replacement24" tube can be cut to length
Moeller Fuel Pick-Up With 1/4" Npt Aluminum Fitting And 3/8" Id Nylon Tubing - 033100-12 - 114-03310012F1
Aluminum fitting 3/8" I.D. Nylon tubing is chemical resistantOEM replacement12" tube can be cut to length
Moeller Fuel Cap W/Gauge - 305194 - 114-305194F1
Replacement fuel cap w/gauge for non-EPA approved tanks.
Moeller Epa Approved Fuel Cap (2011) - 305994-10 - 114-30599410F1
EPA/CARB COMPLIANT 2-stage fuel cap is required on all portable fuel tanks. A portable fuel tank is designated as 12-gallon fuel capacity and less.Audible 'Click" signals cap is sealed on the neck fillTether secures cap to fuel tank while refuelingAuto "Self-Venting" pressure feature vents tank at 5 PSI (Min) when center pup-up vent is in open positionManual momentary pressure relief valve relieves tank pressure prior to cap removal for refueling or connecting/disconnecting fuel line assemblyPositive vent closure for storage and transportation, designed to override of the automatic "self venting" and manual momentary pressure relief function
Moeller Dash Mounted Fuel Gauge 33-240 Ohm'S - 035727-10-1 - 114-035727101F1
Moeller Conversion Capsule Converts Fuel Level Reading From Site Gauge To Electric Dash Mount Gauge - 035760-10 - 114-03576010F1
Converts fuel level reading from standard direct site gauge to electric dash mounted gauge (33-240 Ohms's).
Moeller Center Console & Boston Whaler Topside Fuel Tanks For Boats Built Before 2011 - 31626 - 114-031626F1
A direct, slide-in replacement auxiliary tank for Boston Whaler Montauk 15' & 17' consoles. Constructed of high-density polyethylene with a UV-stabilized resin, designed to withstand the effects of ethanol-blended fuels. Features a molded fill neck with side angle orientation for ease of access and Moeller's PL3 pickup design with a 360-degree swivel. Includes fuel cap with a sight gauge and vent. Fuel line assembly not included.
Moeller Center Console & Boston Whaler Topside Fuel Tanks For Boats Built After 2011 Requiring Epa Compliance - 031626Br - 114-031626Brf1
A direct, slide-in replacement auxiliary tank for Boston Whaler Montauk 15' & 17' consoles. Constructed of high-density polyethylene with a UV-stabilized resin, designed to withstand the effects of ethanol-blended fuels. Features a molded fill neck with side angle orientation for ease of access and Moeller's PL3 pickup design with a 360-degree swivel. Includes fuel cap with a sight gauge and vent. Fuel line assembly not included.
Moeller Center Console & Boston Whaler Topside Fuel Tanks For Boats Built After 2011 Requiring Epa Compliance - 031527Br - 114-031527Brf1
A direct, slide-in replacement auxiliary tank for Boston Whaler Montauk 15' & 17' consoles. Constructed of high-density polyethylene with a UV-stabilized resin, designed to withstand the effects of ethanol-blended fuels. Features a molded fill neck with side angle orientation for ease of access and Moeller's PL3 pickup design with a 360-degree swivel. Includes fuel cap with a sight gauge and vent. Fuel line assembly not included.
