Fuel System
Fueltank Strap Replaces P/N 720-85950578 - 8M0156321 - 720-8M0156321F1
Fuel Water Separator Assembly - 18-7965-1 - 47-79651F1
Compact bracket and separator kit for outboards up to 115hp with 10 micron.
Fuel Tank With Fuel Demand Valves, 3.2 Gal - 8M0045692 - 710-1200-8M0045692F1
Fuel tanks meet U.S. 2011 EPA requirements for a pressurized portable fuel tank. They include a "Diurnal Cap" and Mercury's Fuel Demand Valve (FDV), so fuel is provided only as needed by the engine and not forced through under pressure. Fuel line gets connected directly to the outlet barb of the FDV.
Fuel Tank W/Gauge, Fuel Demand Valve & Disconnect, 3.2 Gal - 8M0047598 - 710-1200-8M0047598F1
Fuel tanks meet U.S. 2011 EPA requirements for a pressurized portable fuel tank. They include a "Diurnal Cap" and Mercury's Fuel Demand Valve (FDV), so fuel is provided only as needed by the engine and not forced through under pressure. Includes a provision for a fuel line quick disconnect. The 32-8M0061885 fuel line plugs directly into the quick disconnect on this tank.
Fuel Tank Repair Kit - 84334 - 180-84334F1
Eliminates dangerous welding. Complete kit contains everything required for making professional-quality permanent repairs in just minutes. Includes state-of-the-art components and easy-to-follow instructions with photographs to make quick permanent repairs to leaks in all types of metal fuel tanks. It repairs cracks up to 4" (10cm) long and holes up to 3/8" (9mm) in diameter. Repair will be complete when the resin cures in 30 minutes. Tank may be refilled after 30 minutes or when the repair is tack free. Repairs can be made ideally at temperatures from 50° F to 75° F (10° C to 24° C). Repairs made at lower temperatures will take longer to cure. (THIS PRODUCT IS NOT FOR USE ON PLASTIC FUEL TANKS).
Fuel Tank Installation Kit - 35723 - 114-035723F1
Replace aging fuel tanks and maximize your fuel capacity space with a Moeller below-deck, permanent tank. Tank system installation kit contains all the parts to install the fuel-fill and through-hull ventilation system. Includes deck fill, hose clamps, chrome/brass thru-hull vent, 1-1/2" fuel fill hose, and 25" of 5/8" vent hose with 5/8" brass hose barb.
Fuel Tank Hold Down Kit - Fch1Dp - 232-Fch1Dpf1
This hold-down kit is manufactured from poly strapping to provide superior strength and good looks. The quick release buckle makes it simple to remove and replace container. The hold-down strap unit comes complete with two 62" poly straps equipped with quick release buckles, four footman loops and mounting hardware.
Fuel Tank Hold Down Kit - 35710 - 114-035710F1
Hold down kit includes four (4) stainless steel hold down brackets.
Fuel Tank Fitting Yamaha 1/4" - 2555756 - 23-88976F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Fuel Tank Fitting 1/4" Je/Omc - 2550642 - 23-88836F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Fuel Sender Replacement Gasket - 50-15511 - 50-15511F1
Fuel Sender Replacement Gasket for 15421, 15461, 15471 & 15501
