Select Category
Engine & Fuel
Pss 30Mm Shaft X 1.75" Log Replaces P/N 730-0230M134 - 0230M134 - 752-0230M134F1
Pss 7/8" Shaft X 2"-2.25" Log Replaces P/N 730-02078200 - 2078200 - 752-02078200F1
Pss Kit Maintenance 1-3/4"X 22 Replaces P/N 730-07134214R - 07134214R - 752-07134214Rf1
Pss Kit Maintenance 2-1/2" X 4 Replaces P/N 730-07212400R - 07212400R - 752-07212400Rf1
Pss Kit Maintenance Replaces P/N 730-07114134R - 07114134R - 752-07114134Rf1
Pss Kit Maintenance Replaces P/N 730-07114234R - 07114234R - 752-07114234Rf1
Pss Kit Maintenance Replaces P/N 730-07118112R - 07118112R - 752-07118112Rf1
Pss Maintenance Kit Replaces P/N 730-07138214R - 07138214R - 752-07138214Rf1
Pss Pss Maintenance Kit, 1-1/4" Shaft - 07114214R - 752-07114214Rf1
As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. PYI suggests preventative maintenance. The PSS bellow should be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced. Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater. Available for shafts from 3/4" to 3-3/4". Includes (1) Bellow, (2) o-rings, (5) Set screws, (4) Hose clamps, (1) Tube of thread lock, (1) Allen key
Pss Pss Maintenance Kit, 1-1/8" Shaft - 07118200R - 752-07118200Rf1
As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. PYI suggests preventative maintenance. The PSS bellow should be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced. Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater. Available for shafts from 3/4" to 3-3/4". Includes (1) Bellow, (2) o-rings, (5) Set screws, (4) Hose clamps, (1) Tube of thread lock, (1) Allen key
Pss Pss Maintenance Kit, 2" Shaft - 07200314R - 752-07200314Rf1
As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. PYI suggests preventative maintenance. The PSS bellow should be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced. Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater. Available for shafts from 3/4" to 3-3/4". Includes (1) Bellow, (2) o-rings, (5) Set screws, (4) Hose clamps, (1) Tube of thread lock, (1) Allen key
Pss Seal 2-1/2"Shaft X 4"Log Replaces P/N 730-02212400 - 2212400 - 752-02212400F1
Pss Shaft Seal Tee Replaces P/N 730-07Kit112 - 07Kit112 - 752-07Kit112F1
Ptef® Trailer Hitch Lubricant - 85804 - 74-85804F1
The best protection for trailer hitches. Impervious to fresh or salt water. Protects from -65°F to +65°F with super adhesion, it will not wash off or break down and is non-toxic, non-staining.
Pulley Driven Engine Cooling Pump - 2620-1101 - 6-26201101F1
Self priming flexible impeller pump. Ideal for engine cooling, washdown, circulation and other general purposes. Corrosion resistant bronze bodies and stainless shafts are well suited for marine environments. Permanently lubricated ball bearings.
Pulley Driven Engine Cooling Pump W/Neoprene Impeller - 777-9001 - 6-7779001F1
Flexible impeller pumps are self-priming to 10' and are ideal for engine cooling, wash-down, circulation, and many general purpose on-board or dockside applications. The bronze bodies and stainless steel shafts are suited for the marine environment and can operate in either rotational direction. Different port orientations available to meet various pumping requirements. Most models have replaceable cams and wearplates for extended life.
Pulley Driven Engine Cooling Pump W/Nitrile Impeller - 777-9003 - 6-7779003F1
Flexible impeller pumps are self-priming to 10' and are ideal for engine cooling, wash-down, circulation, and many general purpose on-board or dockside applications. The bronze bodies and stainless steel shafts are suited for the marine environment and can operate in either rotational direction. Different port orientations available to meet various pumping requirements. Most models have replaceable cams and wearplates for extended life.
Pulley Driven Flexible Impeller Pump - 7420-1001 - 6-74201001F1
Mid-size pump with vertical oriented ports. Self-priming to 10 ft vertical liftFull thickness cam, mechanical seal, short stainless steel shaftNeoprene impeller,Marine engine cooling for engine models: caterpillar 3160. caterpillar 3208.
Pump Asy Seawater For Mtg Of Mech Fuel Pump - 807151A8 - 710-46-807151A8F1
Pump Eng Cooling (F35B-8) Rpl - 10-35038-5 - 189-10350385F1
Compact, raw water resistant, multipurpose bronze pumps. With excellent self-priming capability, these pumps are ideal as cooling water pumps for marine engines, bilge pumps, deckwash pumps, fresh water pumps, fuel transfer pumps and other applications. Also ideally suited on shore to empty septic tanks, to flush clean and to fill water tanks.
Pump Eng Cooling (F35B-8) Rpl - 10-35038-9 - 189-10350389F1
Compact, raw water resistant, multipurpose bronze pumps. With excellent self-priming capability, these pumps are ideal as cooling water pumps for marine engines, bilge pumps, deckwash pumps, fresh water pumps, fuel transfer pumps and other applications. Also ideally suited on shore to empty septic tanks, to flush clean and to fill water tanks.
