Select Category
Engine & Fuel
Sea Water Pump W/Air Fit Ss<46-8M0137218 - 8M0139997 - 710-46-8M0139997F1
Sea Water Pump-V-8 W/V-Belt - 72774A32 - 710-46-72774A32F1
Please see manufacturer application guides for complete application references.
Sea-Dog 2218401 Stainless Hatch Cover Pull W/O Rubber Gasket - 221840-1 - 354-2218401F1
Highly corrosion-resistant, this hatch cover pull provides a simple and convenient way to open the hatches in your boat. Easy-to-install, it features a stainless steel washer for a tight and secure fit. Commonly used on deck mounted access hatches, this hatch cover pull not only looks attractive, but is durable for use in harsh marine conditions. Requires a 3/16" hole. Flange pull is 1-1/4" in diameter x 1/8" thick.
Sea-Dog 221841 Replacement Rubber Gasket Only - 221841 - 354-221841F1
Rubber Gasket Only for hatch cover pull.
Sea-Dog 2218421 Stainless Hatch Cover Pull W/Rubber Gasket - 221842-1 - 354-2218421F1
Highly corrosion-resistant, this hatch cover pull provides a simple and convenient way to open the hatches in your boat. Easy-to-install, it features a stainless steel washer for a tight and secure fit, and a rubber gasket to reduce noise and resist water penetration. Commonly used on deck mounted access hatches, this hatch cover pull not only looks attractive, but is durable for use in harsh marine conditions. Requires a 3/16" hole. Flange pull is 1-1/4" in diameter x 1/8" thick.
Sea-Dog 327150 Rail Mount Motor Bracket, 8 Hp (2-Cycle Only) A: 1-9/16", B: 6-11/16", C:6-11/16", White - 327150 - 354-327150F1
Designed to hold small 2-cycle outboards up to 8 HP upright on the stern rail. These Sea-Dog® Motor Brackets will fit both 7/8" and 1" rails as well as rails using 90° tee fittings. Injection Molded Polypropylene.
Sea-Dog 3271501 Rail Mount Motor Bracket, 8 Hp (2-Cycle Only) A: 1-9/16", B: 6-11/16", C:6-11/16", White - 327150-1 - 354-3271501F1
Designed to hold small 2-cycle outboards up to 8 HP upright on the stern rail. Will fit both 7/8" and 1" rails, as well as rails using 90° tee fittings. The two-piece unit is made of UV stabilized polypropylene and comes complete with fasteners. Can also be used as a mounting platform for barbecues, down rigger brackets, fish cleaning tables, etc.
Sea-Dog 327151 Rail Mount Motor Bracket,, 8 Hp (2-Cycle Only) A: 1-9/16", B: 6-11/16", C:6-11/16", Black - 327151 - 354-327151F1
Designed to hold small 2-cycle outboards up to 8 HP upright on the stern rail. These Sea-Dog® Motor Brackets will fit both 7/8" and 1" rails as well as rails using 90° tee fittings. Injection Molded Polypropylene.
Sea-Dog 364190 Polycarbonate Cover For Poly In-Line Strainer - 364190 - 354-364190F1
Polycarbonate cover for strainer
Sea-Dog 4-Position Ignition Switch - 420356-1 - 354-4203561F1
Stamped brass. Functions: Acc.-Off-Ignition-Start. Rated: Ignition 15 Amp @ 12VDC, Solenoid 30 Amp @ 12VDC, Accessory 15 Amp @ 12VDC.
Sea-Dog 4-Position Magneto Style Ignition/Starter Switch - 420385-1 - 354-4203851F1
Four Position Magneto Style Ignition Switch is constructed of polypropylene. For accessory, off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Choke: 7A @ 12VDC. Accessory: 15A @ 12VDC. Includes two keys. Push to choke.
Sea-Dog 4-Position Magneto Style Ignition/Starter Switch - 420386-1 - 354-4203861F1
Four Position Magneto Style Ignition Switch is constructed of polypropylene. For accessory, off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Choke: 7A @ 12VDC. Accessory: 15A @ 12VDC. Includes two keys. Push to choke.
Sea-Dog 4203601 Switch 3 Position Polypropylene Ignition Switch W/O Boot - 420360-1 - 354-4203601F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Long shaft fits panels up to 1-1/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4203611 Switch 3 Position Polypropylene Ignition Switch W/O Boot - 420361-1 - 354-4203611F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Short shaft fits panels up to 5/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4203651 Switch 3 Position Polypropylene Ignition Switch W/Boot - 420365-1 - 354-4203651F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Long shaft fits panels up to 1-1/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4203661 Switch 3 Position Polypropylene Ignition Switch W/Boot - 420366-1 - 354-4203661F1
3 Position polypropylene ignition/starter switch with 3 screw terminals. 13/16" Shaft dia. Short shaft fits panels up to 5/8" thick. Functions: Off-Ignition-Start.
Sea-Dog 4204871 Safety Ignition Kill Switch - 420487-1 - 354-4204871F1
Marine emergency cut-off Kill Switch attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. The ignition (gray cap) version functions in applications where the circuit is normally closed (complete) with lanyard clip in place on switch. When lanyard is pulled and clip is removed from switch, circuit is open (not complete), resulting in interruption of current to ignition and shutting off engine. Kill switches include a coiled lanyard that is approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 5/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use.
Sea-Dog 520021 Replacement Plug And Gasket - 520021 - 354-520021F1
Replacement parts for 520010 & 520020 series drain plugs.
Sea-Dog 5200211 Replacement Plug And Gasket, Pair - 520021-1 - 354-5200211F1
Replacement parts for 520010 & 520020 series drain plugs.
Sea-Lect Designs Flush Mount Rod Holder Kit (W/ Gasket & Hardware) - K325162-9 - 680-K3251629F1
Great way to add fishing rod storage to you kayak, boat or watercrafts, and features a 30 degree flush mount rod holder Great way to add fishing rod storage to you kayak, boat or watercrafts, and features a 30 degree flush mount rod holderConstructed of durable Injection Molded ABSKit includes flush mount rod holder (1), gasket w/ cap (1), rod holder leash fitting (1), 10-32 X 1-1/4" OH (3), 10-32 Nyloc nut (3), #10 flat washer (3), #10 well nut (3)A: 9-3/16" / B: 1-5/8" / C: 2-1/2" / D: 2-5/8"Rod Holder made in the USA (Everett, WA)!
Seachoice 1.980" Grease Caps (2 Per Pack) - 53631 - 50-53631F1
Steel caps for most common applicationused in bearing kits.
Seachoice 10 Micron Fuel/Water Separating Filter With See Thru Plastic Bowl For Outboards - 20931 - 50-20931 Superseded By: 50-22303F1
Reusable see-thru plastic bowl with drain, and 10 micron filter (20951).
