Select Category
Engine & Fuel
Sherwood 15955S Replacement Seal - 15955S - 762-15955Sf1
Replacement Seal
Sherwood 19674 Replacement Seal - 19674 - 762-19674F1
Replacement Seal
Sherwood Gc101 Cummins Seawater Pump - Gc1-01 - 762-Gc101F1
Impeller Kit: 15000K Minor Repair Kit: 23980Major Repair Kit 23981
Sherwood Gc501 Cummins Seawater Pump - Gc5-01 - 762-Gc501F1
Impeller Kit: 15000K Minor Repair Kit: 23980Major Repair Kit 23981
Shields 16375038036D Fuel Feed Line With Fire Sleeve, 3/8" X 3' - 16-375-038036D - 88-16375038036Df1
Stainless Steel Braided PTFE hose is an ideal choice for marine applications. Straight quick connector and fire sleeveExtreme reliability and longer service life-60°C to +260°C Operating Temperature RangesNot affected by heat, aging, Ozone or UV exposureCompatible with a wide range of chemicals and additivesDesigned to dissipate any potential static charges for added safetyCFR 33 USCG and SAE J1527 approvedUltra Low Permeation
Shields 3370143 Silverado 4000 Type B1-15 Outboard Fuel Line, 1/4" X 10' - 16-337-0143 - 88-3370143F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370146 Silverado 4000 Type B1-15 Outboard Fuel Line, 1/4" X 50' - 16-337-0146 - 88-3370146F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370380 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 250' - 16-337-0380S - 88-3370380F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370383 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 10' - 16-337-0383 - 88-3370383F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370385 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 25' - 16-337-0385 - 88-3370385F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370386 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 50' - 16-337-0386 - 88-3370386F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370560 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 250' - 16-337-0560S - 88-3370560F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370563 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 10' - 16-337-0563 - 88-3370563F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370565 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 25' - 16-337-0565 - 88-3370565F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370566 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 50' - 16-337-0566 - 88-3370566F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields Marine 116-351-1123 Corrugated Fire Acol "C" Fuel Fill Hose - 16-351-1123 - 88-3511123F1
Shields Fire-Acol "C" Fuel Fill Hose resists gasoline/alcohol blends and has a corrugated cover for extra flexibility. This hose is compounded for low permeation and is reinforced with a wire helix imbedded between plies of HD synthetic cord. It is also abrasion resistant. This hose is primarily used for extra flexible fuel fill (gas or diesel) and is for pleasure boats only. The temperature range is -5°F to 180°F. It meets SAE J1527 type A2 and NMMA Type Accepted standards.
Shields Marine Silverado 2000 Type B2 Outboard Fuel & Vent Series 315 Hose | 5/8" Id & 29/32" Od - 16-315-0586 - 88-3150586 Superseded By: 88-3690586F1
Premium quality fuel hose designed for outboard feed and vent lines for pleasure craft. Outside engine compartment use only. Features UV resistant, all rubber construction, low temperature flexibility (-5° F to 180° F) superior weather resistance, and resistance to gasoline/alcohol blends. Complies with SAE J1527 Type B2 specifications. EPA regulations do not allow use of this product in new detachable fuel line assemblies.
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0125 - 88-3680125F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0126 - 88-3680126F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0145 - 88-3680145F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0146 - 88-3680146F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0380S - 88-3680380F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0383 - 88-3680383F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0385 - 88-3680385F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0386 - 88-3680386F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
