Select Category
General
Beckson Rain Drain Opening Port - Po512Dws10 - 35-Po512Dws10F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po512Dwc20 - 35-Po512Dwc20F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po512Dwc10 - 35-Po512Dwc10F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po512Dbs20 - 35-Po512Dbs20F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po414Dws10 - 35-Po414Dws10F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po414Dwc-10 - 35-Po414Dwc10F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Smooth Center - Dp61-W - 35-Dp61Wf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Smooth Center - 35-Dp81W - 35-Dp81Wf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Dimple Center - Dp83-W - 35-Dp83Wf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Dimple Center - Dp83-B - 35-Dp83Bf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Dimple Center - Dp63-W - 35-Dp63Wf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Diamond Center - Dp85N - 35-Dp85Nf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Diamond Center - Dp85-W - 35-Dp85Wf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Diamond Center - Dp65W - 35-Dp65Wf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Diamond Center - Dp65-N - 35-Dp65Nf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Po714-Wc-10 Self-Drain™ Opening Port, White W/Clear Lens - Po714Wc10 - 35-Po714Wc10F1
Designed with drain molded on inside of spigot. Promotes drainage without angle cuts in hull. Allow for thru-bolting. Seats tightly against gasket and lens omitting internal water retention ledge. No water fall when opening after a rain. Ideal for mounting where installation is within 15° of vertical or where no drain is necessary. Patented. All self-drain ports have a white body and a clear window. 1" spigot.
Beckson Po512-Ws-10 Self-Drain™ Opening Port, White W/Smoke Lens - Po512-Ws-10 - 35-Po512Ws10F1
Designed with drain molded on inside of spigot. Promotes drainage without angle cuts in hull. Allow for thru-bolting. Seats tightly against gasket and lens omitting internal water retention ledge. No water fall when opening after a rain. Ideal for mounting where installation is within 15° of vertical or where no drain is necessary. Patented. All self-drain ports have a white body and a clear window. 1" spigot.
Beckson Po512-Wc-10 Self-Drain™ Opening Port, White W/Clear Lens - Po512-Wc-10 - 35-Po512Wc10F1
Designed with drain molded on inside of spigot. Promotes drainage without angle cuts in hull. Allow for thru-bolting. Seats tightly against gasket and lens omitting internal water retention ledge. No water fall when opening after a rain. Ideal for mounting where installation is within 15° of vertical or where no drain is necessary. Patented. All self-drain ports have a white body and a clear window. 1" spigot.
Beckson Po410-Wc-10 Self-Drain™ Opening Port, White W/Clear Lens - Po410Wc10 - 35-Po410Wc10F1
Designed with drain molded on inside of spigot. Promotes drainage without angle cuts in hull. Allow for thru-bolting. Seats tightly against gasket and lens omitting internal water retention ledge. No water fall when opening after a rain. Ideal for mounting where installation is within 15° of vertical or where no drain is necessary. Patented. All self-drain ports have a white body and a clear window. 1" spigot.
Beckson Pf128 Newport Parallelogram Fixed Port, Black Body, Smoked Lens (2 Per Box) - Pf128Bs - 35-Pf128Bsf1
Non-opening and watertight. Black body with smoked lens.
Beckson Pf100 Newport Oval Flex-Port, Smoked Lens, Black Trim Ring - Pf100Sb - 35-Pf100Sbf1
One piece construction for flat or curved surfaces. Smoked lens with Black interior trim ring.
Beckson Ht1821Aw Rectangular Flush Hatch, 18-1/8" X 20-1/2", White - Ht1821Aw - 35-Ht1821Awf1
Hatches are easy to install, and mount vertically or horizontally (invisible fasteners when cover is closed). 180° opening, weather tight seal, reinforced with textured non-skid surface. UV resistant. 1/2" Closed height.AW Models: ASA Material - Acrylonitrile Styrene Acrylate
Beckson Ht1515Aw Rectangular Flush Hatch, 14-5/8" X 14-3/4", White - Ht1515Aw - 35-Ht1515Awf1
Hatches are easy to install, and mount vertically or horizontally (invisible fasteners when cover is closed). 180° opening, weather tight seal, reinforced with textured non-skid surface. UV resistant. 1/2" Closed height.AW Models: ASA Material - Acrylonitrile Styrene Acrylate
Beckson Ht1424Aw Rectangular Flush Hatch, 14" X 24", White - Ht1424Aw - 35-Ht1424Awf1
Hatches are easy to install, and mount vertically or horizontally (invisible fasteners when cover is closed). 180° opening, weather tight seal, reinforced with textured non-skid surface. UV resistant. 1/2" Closed height.AW Models: ASA Material - Acrylonitrile Styrene Acrylate
Beckson Ht1115Aw Rectangular Flush Hatch, 10-3/4" X 14-3/4", White - Ht1115Aw - 35-Ht1115Awf1
Hatches are easy to install, and mount vertically or horizontally (invisible fasteners when cover is closed). 180° opening, weather tight seal, reinforced with textured non-skid surface. UV resistant. 1/2" Closed height.AW Models: ASA Material - Acrylonitrile Styrene Acrylate
