Select Category
General
Scepter Fdmd140 Flo N' Go Duramax 14 Gallon Diesel Transport - Fdmd140 - 770-Fdmd140F1
From the farm to the cottage, for work or for play, refueling has never been so simple! Designed for commercial and industrial applications, the Duramax 14 gallon diesel container provides a safe and convenient way to refill gas-powered tools, tractors, boats, jet skis, ATV's and more. Durable, high-density polyethylene in vibrant yellow for use with diesel fuelIncludes Flo n'Go fluid transfer siphon/pump, pump holder handle and 10' long fuel hoseDual mechanical shut-off valves, at both tank and hose, for spill-proof Flo n' Go disconnectionUL approved, mechanically vented fill capFluid transfer on level surfaces with minimal primingSturdy, 6" wheelsMeets D.O.T. & UL transportation requirements
Scepter Combi Can - Gas/Oil - 3615 - 770-003615F1
Combination gas/oil can holds 6L gas + 2.5L Oil.
Scepter 05177 Military Style Water Container, Green - 5177 - 770-05177F1
Scepter's line of military products are rugged, reliable, and built to last. Tough enough for soldiers, ideal for the outdoor enthusiast, Scepter's military water containers are perfect for camping, emergency management and off-road adventures! Easy to TransportLighter, Better, SaferFood Grade MaterialSuperior Impact resistanceBPA Free
Scepter 03629 Spout Only, Flexible - 3629 - 770-03629F1
Spout only for jerry cans.
Scepter 008499 Stopper, 3/Pk - 8499 - 770-008499F1
Stoppers for jerry cans.
Scepter 003711 Manual Vent Military Style Diesel Jerry Can W/Crc, 5.3 Gal./20L, Yellow - 3711 - 770-003711F1
Manufactured from high-density, unbreakable polyethylene. All sizes easily attach to the patented Flo n' Go™ hand pump. Includes CRC (Child Resistant Cap).
Scepter 003583 3 Pc. Kit (Closure Cap, Stopper, Vent Cap) - 3583 - 770-003583F1
Parts for jerry cans.
Scepter 00072 Easy Flo Spout - 72 - 770-00072F1
Meets EPA/CARB regulations Reduces emissionsSpill proof / child resistantSelf ventingCloses automatically
Scarffer™ - 875 - 655-875F1
A unique tool for cutting accurate scarf joints in plywood up to 3/8" thick. Attaches easily to most circular saws and is simple to remove.
Scantstrut Camera Power Tower, White. Fits: Raymarine For Optimum Mounts For The M100 & M200 Series, 5.9" Height Mount. - Cam-Pt-150-02 - 922-Campt15002F1
Maximize your camera's performance. Perfect for installing on the cabin roof, flybridge, or radar arch of your powerboat. Pre-drilled mounting holes allow the camera to fasten straight to the Camera PowerTowerMarine sealant not requiredPaint finishes complies with our unique 4-step marine paint systemCAMPT15001 , CAMPT30002:Compact mounting profile to ensure a neat installation
Scantstrut Camera Power Tower, White. Fits: Flir, Raymarine, Vei & Nvti Cameras, 5.9" Height Mount. - Cam-Pt-150-01 - 922-Campt15001F1
Maximize your camera's performance. Perfect for installing on the cabin roof, flybridge, or radar arch of your powerboat. Pre-drilled mounting holes allow the camera to fasten straight to the Camera PowerTowerMarine sealant not requiredPaint finishes complies with our unique 4-step marine paint systemCAMPT15001 , CAMPT30002:Compact mounting profile to ensure a neat installation
Scantstrut Camera Power Tower, White, Fits: Raymarine M100 & M200 Series, Height Mount 11.8". - Cam-Pt-300-02 - 922-Campt30002F1
Maximize your camera's performance. Perfect for installing on the cabin roof, flybridge, or radar arch of your powerboat. Pre-drilled mounting holes allow the camera to fasten straight to the Camera PowerTowerMarine sealant not requiredPaint finishes complies with our unique 4-step marine paint systemCAMPT15001 , CAMPT30002:Compact mounting profile to ensure a neat installation
Scantstrut Camera Power Tower, White, Fits: Flir M300, Height Mount 11.8". - Cam-Pt-300-03 - 922-Campt30003F1
Maximize your camera's performance. Perfect for installing on the cabin roof, flybridge, or radar arch of your powerboat. Pre-drilled mounting holes allow the camera to fasten straight to the Camera PowerTowerMarine sealant not requiredPaint finishes complies with our unique 4-step marine paint systemCAMPT15001 , CAMPT30002:Compact mounting profile to ensure a neat installation
Scantstrut Camera Power Tower, White, Fits: Flir M300, 5.9" Height Mount. - Cam-Pt-150-03 - 922-Campt15003F1
Maximize your camera's performance. Perfect for installing on the cabin roof, flybridge, or radar arch of your powerboat. Pre-drilled mounting holes allow the camera to fasten straight to the Camera PowerTowerMarine sealant not requiredPaint finishes complies with our unique 4-step marine paint systemCAMPT15001 , CAMPT30002:Compact mounting profile to ensure a neat installation
Scanstrut Wdradopnary 4° Radar Base Wedge For Powertowers - Wd-Opnary-01 - 922-Wdradopnaryf1
Angles your radar down 4° below horizontal providing a level horizon for your radar when the boat is bow's up underwayFits under open array radar antennas with a base seal to ensure a watertight install
Scanstrut Wdrad01 4° Radar Base Wedge For Powertowers - Wd-Rad-01 - 922-Wdrad01F1
Angles your radar down 4° below horizontal providing a level horizon for your radar when the boat is bow's up underwayFits under radomes with a base seal to ensure a watertight install
Scanstrut Self Levelling Radar Pole Mount - Lmp-1 - 922-Lmp1F1
Self-Levelling Radar Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Fine tuned damping system which reacts to major changes in heel angle of the boatUnique Pole extrusion accommodates two cable channels with a cover strip to hold cables in place and out of view360° Adjustable anodized aluminum base gives choice when deciding where you wish to install the pole mount Base enables pole to be installed on both sloping transoms and level decksSupplied with two support modules which provide maximum fore / aft and sideways supportEasily removable for storage
Scanstrut Self Leveling Radar Mast Mount - Lmm-1 - 922-Lmm1F1
Self-Levelling Radar Mounts ensure your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Positions your radar away from any interference, leaving a clear deck free from obstruction.
Scanstrut Self Leveling Radar Backstay Mount - Lmb-F1 - 922-Lmbf1F1
Self-Levelling Radar Mounts ensure your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Positions your radar away from any interference, leaving a clear deck free from obstruction.
Scanstrut Self Leveling Radar Backstay Mount - Lmb-A1 - 922-Lmba1F1
Self-Levelling Radar Mounts ensure your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Positions your radar away from any interference, leaving a clear deck free from obstruction.
Scanstrut Scsl01Blk Starlink Flat High-Performance Aluminum Wedge, Black - Sc-Sl-01-Blk - 922-Scsl01Blkf1
The Scanstrut Aluminium 8° Wedge Mount for Starlink Flat High-Performance has been specifically designed for the marine environment. This versatile wedge can serve as a standalone option for mounting Starlink directly onto a boat's roof or deck or is compatible with the Scanstrut Modular Dual PowerTower Range and SC103/4 Pole Mounts.. Ideal for multi-electronic installations on powerboats. Designed specifically for transom mounting on sailing boats, ensuring that your Starlink hardware is elevated to an optimal position while optimizing space onboard. Designed to fit, designed to fit Starlink High-Performance.Pre-drilled mounting holes allow Starlink to fasten straight to the PowerTowerNo need to cut the cable connectors off for installation. Mounting gasket included. Marine sealant not required
Scanstrut Scsl01 Starlink Flat High-Performance Aluminum Wedge, White - Sc-Sl-01 - 922-Scsl01F1
The Scanstrut Aluminium 8° Wedge Mount for Starlink Flat High-Performance has been specifically designed for the marine environment. This versatile wedge can serve as a standalone option for mounting Starlink directly onto a boat's roof or deck or is compatible with the Scanstrut Modular Dual PowerTower Range and SC103/4 Pole Mounts.. Ideal for multi-electronic installations on powerboats. Designed specifically for transom mounting on sailing boats, ensuring that your Starlink hardware is elevated to an optimal position while optimizing space onboard. Designed to fit, designed to fit Starlink High-PerformancePre-drilled mounting holes allow Starlink to fasten straight to the PowerTowerNo need to cut the cable connectors off for installation, Mounting gasket included. Marine sealant not required
Scanstrut Scmultif2 Flip Pro Multi Usb & 12V Power Socket, Sc-Multi-F2 Usb-A/Usb-C & 12V Socket - Sc-Multi-F2 - 922-Scmultif2F1
Combines the features of our high-power Flip Pro Max and 12V Power Sockets into a beautiful multi-power solution USB connectorsFast charge (60W max on 24V) up to 2 devices at a timeSupplied with a front-fit bezel kitUV resistant with internal anti-corrosion protective coating and SS Hinge and springIPX4 waterproof with the cover closed120 -150W max power @12V12V or 24V input, 12V only output
Scanstrut Scmultif1 Flip Pro Multi Usb & 12V Power Socket - Sc-Multi-F1 - 922-Scmultif1F1
Combing features of our high-power Flip Pro Max and 12V Power Sockets into a beautiful multi-power solution. When not in use, the spring-loaded caps remain tightly closed, protecting the ports from the elements. Universal fit for any USB-C connectorsFast charge (60W max) up to 2 devices at a timeSupplied with a front-fit bezel kitMarine Ready UV resistant with internal anti-corrosion protective coating and SS Hinge and springIPX4 waterproof with the cover closed120 -150W max power. Ouputs 12V.12V or 24V input, 12V only output
Scanstrut Scaoba2 Atmos Built-In Air Station - Sc-Aob-A2 - 922-Scaoba2F1
ATMOS is the ultimate waterproof, built-in onboard air station that inflates your paddleboards, foils, tenders and more! Compact, lightweight, and sleek, Maximizes convenience without taking up precious space. With both inflate and deflate functions simply set the target pressure at the push of a button. Soft Touch TPE buttons and cutting-edge LCD display. Brushless technology - for power, efficiency, and reliability. Innovative two-stage pump: High-volume, low-pressure (HVLP) / High-pressure, low-volume (HPLV). Max pressure 20 PSI / 1.37 BARMax volume of airflow 1-20 PSI 70 LPM/2.5 CFMMax current draw 12A (140W)Minimum cavity depth required 4.33", Can be installed at an angle ranging from +10° to -30° from vertical^Includes: ATMOS Unit, Black Sun Cover (Optional white cover SC-AOB-A2-SC1), 8' Hose & 6 Hose Adapters including Boston Valve, C7 Valve, H3/HR Valve, Pinch Valves, and 805 ValvesCompact and shallow designMinimum cavity depth required 4.33", Can be installed at an angle ranging from +10° to -30° from verticalBrushless Technology - for power, efficiency, and reliabilityInnovative two-stage pump: High-volume, low-pressure (HVLP) / High-pressure, low-volume (HPLV)Includes: ATMOS Unit, Black Sun Cover (optional white cover SC-AOB-A2-SC1), 8' Hose & 6 Hose Adapters including Boston Valve, C7 Valve, H3/HR Valve, Pinch Valves, and 805 Valves
