Select Category
General
Ram-Rod™ 2007 Fishing Rod Holder With Rectangle Flat Surface Base - Rap-340 - 170-Rap340F1
The RAM-ROD™ 2007 rod holder is one of the most popular rod holders for the kayak angler due to its simplicity and adjustability. Utilizing the RAM patented 1.5" ball, you can rotate and adjust the rod holder almost infinitely making this rod holder ideal for kayak fishing. The ball and socket enable fine adjustment without the need to loosen a knob which is ideal for making small adjustments as your fishing scenario changes throughout the day. Includes 1.5" ball with a 2" x 2.5" flat surface mounting base.
Ram-Rod™ 2000 Fishing Rod Holder With Flush Mounting Base - Ram-114-F - 170-Ram114Ff1
The RAM-114-F, high strength composite fishing rod holder with flush base, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
Ram-Rod™ 2000 Fishing Rod Holder With Bulkhead Mounting Base - Ram-114-B - 170-Ram114Bf1
The RAM-114-B, high strength composite fishing rod holder with bulkhead base, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
Ram-Rod® Hd Fishing Rod Holder - Rap-433-Bmp - 170-Rap433Bmpf1
Compatible with both spinning and casting reels, specifically designed for rugged environments and large fishing rods. It features a rotating ring to keep your rod in place and a swing arm rod stop that can convert it into a tube style rod holder. Compatible with the C-Size and B-Size hex ball bases. Includes a 6" spline post and bulkhead/flat surface mounting base. Also GoPro® compatible - just attach your GoPro factory mount directly to the rod holder or use the Double Ball Mount to attach any action camera. If you want to mount your phone to utilize your mobile fishfinder app, use the Double Ball Mount with X-Grip®.
Ram X-Grip® Phone Mount - Ram-Hol-Un7Bu - 170-Ramholun7Buf1
Sometimes, it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip® has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phone and become the most useful accessory in your vehicle.The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.Cradle DimensionsMinimum Width = 1.875" (Minimum Height = 4.25")Maximum Width = 3.25" (Minimum Height = 2.25")Depth = 0.875"
Ram Universal X-Grip® Large Phone/Phablet Cradle - Ram-Hol-Un10Bu - 170-Ramholun10Buf1
The RAM-HOL-UN10BU has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the X-Grip® IV is the phablet cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phablet and become the most useful accessory in your vehicle.The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.Cradle DimensionsMinimum Width = 1.75" (Minimum Height = 5.5")Maximum Width = 4.5" (Minimum Height = 3.25")Depth = 0.875"
Ram Tough-Claw™ Mount With Level Cup™ Drink Holder - Ram-B-132-400U - 170-Ramb132400Uf1
Tough-Claw™ base and RAM Level Cup™ Self-Leveling Drink Holder. The drink cup holder has two pivot points, allowing for your drink to always stay upright and never spill. Mount rotates 360°. The integrated eyelet and hook provide an optional tethering function, securing any small or open container in any harsh environment. The RAM Tough-Claw™ is the perfect mounting base for quick and easy nstallation and removal on round, square, odd shaped rails and bars and flat surfaces. Easy installation in many applications including motorcycles, kayaks and boats, bicycles, wheelchairs and more. Compatible with any cups, cans, bottles or mugs ranging from 2.5" - 3.5" diameter. Koozie is included.Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14"
Ram Standard Length Double Socket Arm For 1.5" Balls - Ram-201 - 170-Ram201F1
The RAM-201, standard length double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.Dimensions:Overall Length: 5.625"Socket-To-Socket Length: 4.5"
Ram Small Tough-Claw™ With 1" Diameter Rubber Ball - Rap-B-400U - 170-Rapb400Uf1
The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Patent PendingClamping Range (Rail/Tube Surfaces): 0.625" to 1.5"Clamping Range (Flat Surfaces): 0" to 1.14" Physical Dimensions:Height: 4.25", Width: 1.18"
Ram Small Tough-Claw™ With 1.5" Diameter Rubber Ball - Rap-400U - 170-Rap400Uf1
The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Patent PendingClamping Range (Rail/Tube Surfaces): 0.625" to 1.5"Clamping Range (Flat Surfaces): 0" to 1.14"Physical Dimensions: Height: 4.81", Width: 1.18"
Ram Single Swing Arm Vertical Mount System - Ram-109V - 170-Ram109Vf1
The RAM single swing arm mount is made of powder coated marine grade aluminum. It consists of a 6" long BENT swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360° rotation.
Ram Single Swing Arm Horizontal Mount System - Ram-109H - 170-Ram109Hf1
The RAM single swing arm mount is made of powder coated marine grade aluminum. It consists of a 6" long BENT swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360° rotation.
Ram Short Double Socket Arm For 1" Balls - Ram-B-201U-A - 170-Ramb201Uaf1
The RAM-B-201U-A, short double socket arm, has a socket at both ends that accommodates 1" ball bases. RAM socket technology allows for almost infinite adjustment and perfect viewing angles.(This product does not include single spring) Dimensions: Overall Length: 2.38"Socket-To-Socket Length: 1.75"
Ram Rapb417400 Ram® Level Cup™ Xl Drink Holder With Ram® Tough-Claw™ - Rap-B-417-400 - 170-Rapb417400F1
Designed for bigger insulated cups, plastic water bottles or steel coffee cup, Level Cup XL keeps your drink upright, regardless of the conditions. This kit includes a Level Cup XL with an integrated Tough-Claw™. This allows for toolless removal and adjustments on any rail or flat bar. Can attach to any surface from flat through a 1.5" railing. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various size cups as well. Compatible with 12-32 oz drinks
Ram Rap403 Ram® Cable Manager W/Amps Hole Pattern For Electronic Mounts - Rap-403 - 170-Rap403F1
The RAM Cable Manager creates an integrated route for electrical wiring and cleanly covers installation holes. A great addition to any surface mounting application. The RAM Cable Manager is made of glass filled nylon which has the benefit of creating a barrier between the RAM Surface Mount and the attachment area; minimizing vibration while reducing fiberglass and gel-coat damage. This item will work with any of the 2-5/8" round plates with AMPs hole pattern.
Ram Rap402U Ram® Cable Manager For 3.68" Diameter Round Base Plates, Bulk - Rap-402U - 170-Rap402Uf1
An integrated route for electrical wiring which cleanly covers installation holes. Glass filled nylon creates a barrier between the RAM Surface Mount and the attachment area, minimizing vibration. This item will fit any of the 3.68" diameter round plates with a 3 hole pattern. Compatible with all 2.25" diameter ball bases that contain a three-hole, 120° hole pattern. Will not work with the AMPs hole pattern plates.
Ram Rap402 Ram® Cable Manager For Round Base Plates, Packaged - Rap-402 - 170-Rap402F1
An integrated route for electrical wiring which cleanly covers installation holes. Glass filled nylon creates a barrier between the RAM Surface Mount and the attachment area; minimizing vibration. This item will fit any of the 3.68" diameter round plates with a 3 hole pattern. Compatible with all 2.25" diameter ball bases that contain a three hole, 120° hole pattern. Will not work with the AMPs hole pattern plates.
Ram Rap400D202U Ram® Trolling Motor Stabilizer - Tough-Claw™ - Rap-400-D-202U - 170-Rap400D202Uf1
Includes small version of the RAM® Tough-Claw™, long length C size RAM® double socket arm, and 2.5" round plate with C size 1.5" RAM® rubber ballSmall RAM® Tough-Claw™ base is designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625" to 1.14" in outer diameter; rubber pads provide stable gripping and protection of mounting surfaceMade of powder-coated, marine-grade aluminum and high-strength composite for durability and reliability in the most demanding environmentsBacked by a lifetime warranty
Ram Rap Ball Universal Mount With 6-1/4" X 2" Plate, 1" Ball - Rap-B-111 - 170-Rapb111F1
Standard length double socket arm and 6.25" x 2" rectangle plate. The rectangle base contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Made of High Strength Composite.
Ram Rap Ball Universal Mount With 6-1/4" X 2" Plate, 1-1/2" Ball - Rap-111 - 170-Rap111F1
Standard length double socket arm and 6.25" x 2" rectangle plate. The rectangle base contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Made of High Strength Composite.
Ram Ramd20225C202 2-1/4" Ball Mount For Humminbird Helix 9, 10, 12 - Ram-D-202-25-C-202 - 170-Ramd20225C202F1
Powder coated marine grade aluminum mount. The round plate contains two mounting holes at 180° and three mounting holes at 120°. The rectangular plate contains a 4-hole pattern of 1.5" x 4.5". The patented rubber ball and socket technology dampens shock and vibration, and allows for nearly infinite adjustability, So you can set your device at the perfect veiwing angle, while suited for any rugged environment. Weight capacity up to 15 lbs. Fits Humminbird Helix 9, Humminbird Helix 10, Humminbird Helix 12.
Ram Ramd115C Universal D Size Ball Mount For 9"-12" Fishfinders & Chartplotters - Ram-D-115-C - 170-Ramd115Cf1
A base with a 2.25" diameter D size ball, arm and a 6.25" x 2" marine electronic plate with a D size ball for larger devices. The plate contains different combinations of pre-drilled holes and is a direct fit for 9"-12" fishfinder gimbal brackets.
Ram Ramd115 Universal D Size Ball Mount For 9"-12" Fishfinders & Chartplotters - Ram-D-115 - 170-Ramd115F1
A base with a 2.25" diameter D size ball, arm and a 6.25" x 2" marine electronic plate with a D size ball for larger devices. The plate contains different combinations of pre-drilled holes and is a direct fit for 9"-12" fishfinder gimbal brackets.
Ram Ramd111U 2-1/4" Ball Mount W/3" X 11" Base & 3-3/4" Base - Ram-D-111U - 170-Ramd111Uf1
A 3.68" diameter round base, double socket arm and 11" x 3" rectangular plate. The round base has pre-drilled holes, including two holes at 180° and three holes at 120°. The plate has different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Ram Ramd111 2-1/4" Ball Mount W/3" X 11" Base & 3-3/4" Base - Ram-D-111 - 170-Ramd111F1
A 3.68" diameter round base, double socket arm and 11" x 3" rectangular plate. The round base has pre-drilled holes, including two holes at 180° and three holes at 120°. The plate has different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
