Select Category
General
Weaver Sd7 Heavy Duty Davit System - Sd7 - 957-Sd7F1
For 10'-12' dinghies. They feature high strength davit heads and oversize transom mounts to handle the extra weight of larger dinghies.
Weaver Sd6 Extended Swim Grid Davit Sets With 6" Risers - Sd6 - 957-Sd6F1
Features risers which come with standard davit heads. Perfect for dinghies with considerable freeboard. Complete with all parts necessary for an easy installation.
Weaver Sd4 Extended Swim Grid Davit Sets With 4" Risers - Sd4 - 957-Sd4F1
Features risers which come with standard davit heads. Perfect for dinghies with considerable freeboard. Complete with all parts necessary for an easy installation.
Weaver Rsh120 Replacement Yolk - Rsh120 - 957-Rsh120F1
Fits into RP101/RP101G pads.
Weaver Rs110Ext4 Extended Davit Head - Ext4 - 957-Rs110Ext4F1
For RBD100. Sold by the each.
Weaver Rs110Ext2 Extended Davit Head - Ext2 - 957-Rs110Ext2F1
For RBD100. Sold by the each.
Weaver Rs1104X6 Offset Davit Head - Offset4X6 - 957-Rs1104X6F1
For RBD100. Sold by the each.
Weaver Rs1104X4Up Offset Davit Head - Upset4X4 - 957-Rs1104X4Upf1
For RBD100. Sold by the each.
Weaver Rs1104X4 Offset Davit Head - Offset4X4 - 957-Rs1104X4F1
For RBD100. Sold by the each.
Weaver Rs1104X2 Offset Davit Head - Offset4X2 - 957-Rs1104X2F1
For RBD100. Sold by the each.
Weaver Rs1102X6 Offset Davit Head - Offset2X6 - 957-Rs1102X6F1
For RBD100. Sold by the each.
Weaver Rs1102X4 Offset Davit Head - Offset2X4 - 957-Rs1102X4F1
For RBD100. Sold by the each.
Weaver Rs1102X2 Offset Davit Head - Offset2X2 - 957-Rs1102X2F1
For RBD100. Sold by the each.
Weaver Rs110 Standard Davit Head - Rs110 - 957-Rs110F1
For RBD100. Sold by the each.
Weaver Quick Kit, 2/Pk - Quickkit - 957-Quickf1
Receiver plates for easy removal of the Davit Heads from the swim platform for use with the RBD100 and SSHR for the SD1. Comes with all the mounting hardware plus the pin and lanyard. Not to be used with RS150.
Weaver Mst Motosto Transom Mount Motor Bracket - Motosto-Tr - 957-Mstf1
Allows you to store your 15 hp or smaller on the transom of your yacht. When under way the bracket is in normal position and when using the motor the bracket can be swung out of the way against the transom. This bracket is not removable.
Weaver Mss Motosto Swim Platform Motor Bracket - Motosto-Sw - 957-Mssf1
Allows you to remove your motor from your dinghy and place it on the swim platform in a horizontal position before getting out of your dinghy. The bracket is removable from the swim step leaving a low profile receiver plate on the swim platform similar to the Weaver Quick Kit bracket. Dimensions 13" W x 5" D x 10" H.
Weaver Motokr8 Weaver Moto Kicker Swim Platform Motor Bracket - Moto-Kr8 - 957-Motokr8F1
This trolling motor fixed bracket is designed to install on a swim platform. It will hold up to a 9.9 hp 4 stroke engine. Made for the marine enviroment from 304 s/s with welded seams. The mounting pad is made from Starboard. Bracket dimensions 11.25"W x 5"D (+1.5" Pad) x 8"H.
Weaver Leaverstds Standard Weaver Leaver, Starboard Side - Leaver-S - 957-Leaverstdsf1
Designed to be used with Weaver Snap Davits. It allows your outboard to remain upright while your inflatable is in the vertical position. The Weaver Leaver is made of rugged stainless steel and accommodates outboards that are mounted to pivot either to the port or starboard. 13" of clear transom is required. Will not work with motors that have power trim and tilt. These units are easily switched port to starboard. Standard: For transoms up to 4" down from the top of the tube. Visit weaverindustries.com for Additional Info & Measurement Instructions
Weaver Leaverstdp Standard Weaver Leaver, Port Side - Leaver-P - 957-Leaverstdpf1
Designed to be used with Weaver Snap Davits. It allows your outboard to remain upright while your inflatable is in the vertical position. The Weaver Leaver is made of rugged stainless steel and accommodates outboards that are mounted to pivot either to the port or starboard. 13" of clear transom is required. Will not work with motors that have power trim and tilt. These units are easily switched port to starboard. Standard: For transoms up to 4" down from the top of the tube. Visit weaverindustries.com for Additional Info & Measurement Instructions
Weaver Leaverm3S Model 3 Weaver Leaver, Starboard Side - Lvr-M3-S - 957-Leaverm3Sf1
Designed to be used with Weaver Snap Davits. It allows your outboard to remain upright while your inflatable is in the vertical position. The Weaver Leaver is made of rugged stainless steel and accommodates outboards that are mounted to pivot either to the port or starboard. 13" of clear transom is required. Will not work with motors that have power trim and tilt. These units are easily switched port to starboard. Model 3: For deep transoms up to 6" down from the top of the tube. Visit weaverindustries.com for Additional Info & Measurement Instructions
Weaver Leaverm3P Model 3 Weaver Leaver, Port Side - Lvr-M3-P - 957-Leaverm3Pf1
Designed to be used with Weaver Snap Davits. It allows your outboard to remain upright while your inflatable is in the vertical position. The Weaver Leaver is made of rugged stainless steel and accommodates outboards that are mounted to pivot either to the port or starboard. 13" of clear transom is required. Will not work with motors that have power trim and tilt. These units are easily switched port to starboard. Model 3: For deep transoms up to 6" down from the top of the tube. Visit weaverindustries.com for Additional Info & Measurement Instructions
Weaver Hoistleaver Hoist/Leaver - Hoist Delux - 957-Hoistleaverf1
Pick up your dinghy and motor at the same time using our foot operated hoist. Lifting from the Leaver bracket that your dinghy motor is attached to, the dinghy raises at the same time as the motor is swinging out over the swim platform. After the dinghy and motor are brought into the vertical position, the hoist remains hooked up to the dinghy/motor. For hard bottom dinghies. You will need to order the HDRBD202 davit system (not included) and at least one stand-off bracket at the bow of the inflatable for more stabilization. HD-RBD202 required for hoist/leaver installation, sold separately.Weaver worksheet must be filled out as this product is custom tailored.Visit weaverindustries.com for Additional Info & Measurement Instructions
Weaver C1208Rem Swivel (Removable) Dinghy Chocks, 4/Pk - C1208Crem - 957-C1208Remf1
Universal chocks for mounting a hard bottomed dinghy on the deck or bridge of a yacht. Swivel: Pads swivel in any direction and can be adjusted up by using spacer bolts (sold separately). Removable: Includes Removable bases that let you remove the stanchions from your deck or bridge if you have an area you use for other purposes.
Weaver C1207Rem Swivel (Removable) Dinghy Chocks, 4/Pk - C1207Crem - 957-C1207Remf1
Universal chocks for mounting a hard bottomed dinghy on the deck or bridge of a yacht. Swivel: Pads swivel in any direction and can be adjusted up by using spacer bolts (sold separately). Removable: Includes Removable bases that let you remove the stanchions from your deck or bridge if you have an area you use for other purposes.
