Select Category
General
Lewmar Tunnel, 9-5/6" (250Mm) X 6'7" - 589503 - 239-589503F1
Tunnel only, fits 250TT Thrusters.
Lewmar Tunnel, 7-9/32" (185Mm) X 4'11" - 589302 - 239-589302F1
Tunnel only, fits 185TT Thrusters.
Lewmar Tunnel, 7-9/32" (185Mm) X 3'3" - 589301 - 239-589301F1
Tunnel only, fits 185TT Thrusters.
Lewmar Tunnel, 5-1/2" (140Mm) X 2'6" - 589101 - 239-589101F1
Tunnel only, fits 140TT Thrusters.
Lewmar Tunnel, 5-1/2" (140 Mm) X 4'11" - 589103 - 239-589103F1
Tunnel only, fits 140TT Thrusters.
Lewmar Tunnel, 5-1/2" (140 Mm) X 3'3" - 589102 - 239-589102F1
Tunnel only, fits 140TT Thrusters.
Lewmar Thruster Motor Support Bracket Kit, 140Tt - 589096 - 239-589096F1
A complete thruster system consists of a thruster unit, control panel, control cable, fuse holder, fuse and tunnel.
Lewmar T-Track Genoa Car W/Plunger, Size 2 - 29042700 - 239-29042700F1
Fits standard 32mm (1-1/4") T-Track.
Lewmar Retro-Fit Vent, Grey - 361041990 - 239-361041990F1
Vent can be fitted to the acrylic lens of any Lewmar hatch or to the deck*Made from the same rugged composite used in many Lewmar hatchesStyled to match the Low and Medium Profile hatchesCaptive bung to close the ventilator © it cannot be lostFits deck thickness to 100mm (3.93")Tested to CE ISO 12216 and leak testedNo sealant required for hatch fitting* Trim sold separately for deck fitting
Lewmar Retro-Fit Vent Trim For Deck Install - 361042992 - 239-361042992F1
Trim for deck fitting a retro-fit vent.
Lewmar Profish Upgrade Kit - 66000616 - 239-66000616F1
Converts a Pro-Series windlass to a ProFish freefall windlass. The kit can only be fitted to Pro-Series units made from Oct 2006 onwards. To check compatibility undo gypsy nut and check to see if there is a drilled, threaded hole in the end of the shaft. If no hole is visable then this cannot be retrofitted.
Lewmar Ocean Hatch, Size 70 Flat Base - 39670050 - 239-39670050F1
With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face. Friction levers hold the lid open in any position up to 95°Anodized aluminum frame for corrosion resistanceAll sizes suitable for CE Area 2 (Deck, Coachroof, Cockpit and Transom)
Lewmar Ocean Hatch, Size 70 Flange Base - 39670070 - 239-39670070F1
With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face. Friction levers hold the lid open in any position up to 95°Anodized aluminum frame for corrosion resistanceAll sizes suitable for CE Area 2 (Deck, Coachroof, Cockpit and Transom)
Lewmar Ocean Hatch, Size 60 Flange Base - 39660070 - 239-39660070F1
With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face. Friction levers hold the lid open in any position up to 95°Anodized aluminum frame for corrosion resistanceAll sizes suitable for CE Area 2 (Deck, Coachroof, Cockpit and Transom)
Lewmar Ocean Hatch, Size 50 Flat Base - 39650050 - 239-39650050F1
With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face. Friction levers hold the lid open in any position up to 95°Anodized aluminum frame for corrosion resistanceAll sizes suitable for CE Area 2 (Deck, Coachroof, Cockpit and Transom)
Lewmar Ocean Hatch, Size 30 Flat Base - 39630050 - 239-39630050F1
With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face. Friction levers hold the lid open in any position up to 95°Anodized aluminum frame for corrosion resistanceAll sizes suitable for CE Area 2 (Deck, Coachroof, Cockpit and Transom)
Lewmar Ocean Hatch, Size 20 Flat Base - 39620050 - 239-39620050F1
With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face. Friction levers hold the lid open in any position up to 95°Anodized aluminum frame for corrosion resistanceAll sizes suitable for CE Area 2 (Deck, Coachroof, Cockpit and Transom)
Lewmar Ocean Hatch, Size 10 Flange Base - 39610070 - 239-39610070F1
With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face. Friction levers hold the lid open in any position up to 95°Anodized aluminum frame for corrosion resistanceAll sizes suitable for CE Area 2 (Deck, Coachroof, Cockpit and Transom)
Lewmar Medium Profile Hatch, Size 60 - 39960020 - 239-39960020F1
Ideal as a foredeck hatch on larger offshore yachts, the Medium Profile has thicker acrylic and deeper frame sections for greater strength and durability. It features Lewmar's unique sealing system, allowing for easy acrylic replacement. All while retaining the smooth, modern lines of the Low Profile Hatch. Outside handles allow the hatch to be opened from on deck if it is not lockedFriction levers hold the lid open in any position up to 95°Anodized aluminum frame for corrosion resistanceCurved upper frame profile for strength as well as modern stylingFull range of spare parts available
Lewmar Medium Profile Hatch, Size 50 - 39950020 - 239-39950020F1
Ideal as a foredeck hatch on larger offshore yachts, the Medium Profile has thicker acrylic and deeper frame sections for greater strength and durability. It features Lewmar's unique sealing system, allowing for easy acrylic replacement. All while retaining the smooth, modern lines of the Low Profile Hatch. Outside handles allow the hatch to be opened from on deck if it is not lockedFriction levers hold the lid open in any position up to 95°Anodized aluminum frame for corrosion resistanceCurved upper frame profile for strength as well as modern stylingFull range of spare parts available
Lewmar Medium Profile Hatch, Size 44 - 39944020 - 239-39944020F1
Ideal as a foredeck hatch on larger offshore yachts, the Medium Profile has thicker acrylic and deeper frame sections for greater strength and durability. It features Lewmar's unique sealing system, allowing for easy acrylic replacement. All while retaining the smooth, modern lines of the Low Profile Hatch. Outside handles allow the hatch to be opened from on deck if it is not lockedFriction levers hold the lid open in any position up to 95°Anodized aluminum frame for corrosion resistanceCurved upper frame profile for strength as well as modern stylingFull range of spare parts available
Lewmar Medium Profile Hatch, Size 30 - 39930020 - 239-39930020F1
Ideal as a foredeck hatch on larger offshore yachts, the Medium Profile has thicker acrylic and deeper frame sections for greater strength and durability. It features Lewmar's unique sealing system, allowing for easy acrylic replacement. All while retaining the smooth, modern lines of the Low Profile Hatch. Outside handles allow the hatch to be opened from on deck if it is not lockedFriction levers hold the lid open in any position up to 95°Anodized aluminum frame for corrosion resistanceCurved upper frame profile for strength as well as modern stylingFull range of spare parts available
Lewmar Low Profile Round Hatch, Size 22 - 39922030 - 239-39922030F1
The Low Profile Hatch has soft styling and sleek looks, ideal for use on a powerboat. Smaller ventilation hatches are suitable for any deck location on sailboats, while the larger sizes can be used as foredeck hatches on smaller to mid size yachts. All low profile hatches have a height of 1" above deck. CE Approved. Outside handles allow the hatch to be opened from on deck if it is not lockedLow profile hatches open up to 180° (round hatches open to 170°)Friction levers to hold the lid open in any position to 95° on Stay versionsAnodized aluminum frame for corrosion resistanceCurved upper frame profile for strength as well as modern stylingFull range of spare parts available
