Johnson Pump Gp8-19 Gear Pump With Oil Change Kit - 80-47508-01 - 189-804750801F1

Compact, lightweight gear pump has no impellers to burn up or replace. Pump body and gears are made of PTFE for long life and the pump is self priming up to 3.2 ft. Includes oil dipstick extraction tubes (6 & 8mm) and 70" power cable w/battery clamps. Hose outlet: 1/2", inlet: 5/16".

Johnson Pump F8B-50017 1-1/2 Clutch Pump 12V 2Xb Pulley - 10-13022-90 - 189-101302290F1

Johnson Pump F8B-5 1-1/4" Npt Electric Clutch Pump ,12 V,2Xa Pulley - 10-13022-84 - 189-101302284F1

Suitable for bilge and washdown, you have pumping power on demand by the push of a button. With an electro-magnetic clutch you will have pumping power whenever needed, at a push of a button, without being at the pump. Wearing parts are easily replaceable and service kits are available for all standard models. Has a bronze body and a connection for a vacuum switch. The shaft is stainless steel and is mounted with permanently lubricated double ball bearings. Mechanical seal. Full or reduced CAM. Pulley: 2xA or 1xB-groove. 50017 replacement for Jabsco 6400-0004. GPM shown at 1750 rpm. Includes pump & clutch assembly.

Johnson Pump F8B-5 1-1/2" Npt Electric Clutch Pump,12V 2Xb Pulley - 10-13022-88 - 189-101302288F1

Suitable for bilge and washdown. With an electro-magnetic clutch you will have pumping power whenever needed, at a push of a button, without being at the pump. Wearing parts are easily replaceable and service kits are available for all standard models. Has a bronze body and a connection for a vacuum switch and stainless steel shaft mounted with permanently lubricated double ball bearings. Mechanical seal. Full or reduced CAM. Pulley: 2xA or 1xB-groove. 50017 replacement for Jabsco 6400-0004. GPM shown at 1750 rpm. Pumps can operate with either a 12V or 24V clutch.

Johnson Pump F7B-9 John Deere Crankshaft Style Pump - 10-24428-01 - 189-102442801F1

Johnson Pump F7B-9 John Deere Crankshaft Style Pump.

Johnson Pump F7B-9 Crankshaft Style Pump - 10-24753-01 - 189-102475301 Superseded By: 189-101359902F1

Johnson Pump 81-47239 Manual Pump Assembly For Toilets - 81-47239-01 - 189-814723901F1

Johnson Pump 81-47239 Manual Pump Assembly For Toilets.

Johnson Pump 804762501 Aqua-T™ Super Compact Manual Toilet - 80-47625-01 - 189-804762501F1

AquaT™ Super Compact - the smallest and lightest toilet in our AquaT™ range, designed for making a water toilet installation possible onboard even smaller vessels, requiring less space than ever before. The fine finish and well thought-through design of these toilets is remarkable. Made from white vitreous porcelain, and with corrosion resistant parts throughout, the Johnson Pump AquaT™ marine toilet, is quiet, robust and easy to clean. The AquaT™ toilet will give you years of trouble free operation. The manual version incorporates an ergonomically designed, hand-powered piston pump that can be mounted for either left-hand or right-hand use. When spare parts such as a new seat or valve are needed, you'll find Johnson Pump's global network of distributors at your service. It's probably fair to think of most toilets as commonplace products, but look at the features and you're sure to see that the AquaT™ is far from ordinary. Quiet, hygienic and reliable, the Johnson Pump AquaT™ marine toilet is perfect for almost any marine toilet room. Smallest and lightest in our AquaT™ marine toilet rangeConversion kits available manual to electric, interchangeable with competitor modelsReversible pump mounting, left to rightSoft close plastic seat on white vitreous porcelainAll corrosion resistant and easy to maintain

Johnson Pump 71245 Transom Shims (2 Per Pack) - 71245 - 189-71245F1

90511: 3/4" Thru-hull w/ shut off valve.9068100: 3/4" Hose barb w/ shut off valve & mounting bracket.

Johnson Pump 65000 12V Complete Oil Change Kit With Pail - 65000 - 189-65000F1

This complete, self contained package features a compact, lightweight gear pump with no impellers to burn up or replace. Pump body and gears are made of PTFE for long life and the pump is self priming up to 3.2 ft. Includes oil dipstick extraction tubes (6 & 8mm) and 70" power cable w/battery clamps. Hose outlet: 1/2", inlet: 5/16"

Johnson Pump 54270 Cartridge Horizontal Mount - 54270 - 189-54270F1

Mounts pump securely inside bilge area on a vertical surface and releases it with just a snap. 110° bracket works with Cartridge and Cartridge Duo pumps.

Johnson Pump 36303 Ultima Automatic Switch - 36303 - 189-36303F1

Patented Mirus field effect detector cells detect disruptions caused by water and fluids, and are not affected by oil or foreign debris. No moving parts, totally sealed solid state electronics and field detectors. No mercury and no exposed sensors eliminate corrosion possibilities.

Johnson Pump 36152 Electro-Magnetic Float Switch 12V - 36152 - 189-36152F1

Compact mechanical switch offers a combination of reliable sold state electronics and a sealed float switch providing reliability when you need it. The switch features a three second delay to prevent false starts and is made with high impact plastic to withstand the toughest conditions. Activates at 2" water level and deactivates at 3/4" water level.

Johnson Pump 28572, 750 Gph Spare Motor For Cartridge Pump - 28572 - 189-28572F1

Upgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Replacement motor cartridges fit Johnson Pump aerators, bilge, low boy, twinport, and shower sump pumps

Johnson Pump 28552, 500 Gph Spare Motor For Cartridge Pump - 28552 - 189-28552F1

Upgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Replacement motor cartridges fit Johnson Pump aerators, bilge, low boy, twinport, and shower sump pumps

Johnson Pump 28512, 1000/1250 Gph Spare Motor For Cartridge Pump - 28512 - 189-28512F1

Upgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Replacement motor cartridges fit Johnson Pump aerators, bilge, low boy, twinport, and shower sump pumpsUniversal pump housing allows for upgradeable GPH

Johnson Pump 26014 Automatic Switch As888/26014 - 26014 - 189-26014F1

This automatic switch has a time-proven micro switch without mercury. When water exceeds the acceptable level, the pump is turned on by a rolling steel ball, which changes the pressure on the micro switch. Attaches to any Johnson Pump bilge pump through the clip on "T-slot" and can be used with any 6, 12, 24 or 32 V systems.

Johnson Pump 24V Macerator Pump - 10-24453-02 - 189-102445302F1

A high speed rotary cutter shreds waste more efficiently, allowing the impeller to rotate faster producing a higher discharge capacity. The brass shredder, nitrile impeller and stainless steel shaft prevents corrosion and is resistant to chemicals. Design allows for direct interchange with other macerators for easy installation. Empties a 30 gallon holding tank in about 3 minutes. Suitable for bowl or holding tank discharge. Self priming to 5 feet. Ignition protected. Amp draw: 8 max. Hose size: 1.5" intake.

Johnson Pump 201951W Hand Pump/ 18" 8 Stroke/Gal - 20195-1W - 189-201951Wf1

Light, tough, durable, easy handling, extra fast pumping hand pumps are ideal stow aboards. Comfortable handle grip and extra large capacity makes manual pumping somewhat less of a chore. Ideal for emergency pumping and where electrical current is not available. Ideal for emergency pumping8 strokes per gallon

Johnson Pump 12V Macerator Pump - 10-24453-01 - 189-102445301F1

A high speed rotary cutter shreds waste more efficiently, allowing the impeller to rotate faster producing a higher discharge capacity. The brass shredder, nitrile impeller and stainless steel shaft prevents corrosion and is resistant to chemicals. Design allows for direct interchange with other macerators for easy installation. Empties a 30 gallon holding tank in about 3 minutes. Suitable for bowl or holding tank discharge. Self priming to 5 feet. Ignition protected. Amp draw: 15 max. Fuse size: 12 amp. Hose size: 1.5" intake.

Johnson Pump 10605 90 Degree Side Mount Bracket - 10605-00 - 189-1060500F1

Mounts pump securely inside bilge area on a vertical surface and releases it with just a snap. 90° bracket works with Cartridge and Cartridge Duo pumps.

Johnson Pump 10351874 F35B-9 Pump Oem Farymann Diesel - 10-35187-4 - 189-10351874F1

F35B-9; Direct OEM replacement for Farymann Diesel 538.014.1. Full Cam. Lip Seal. Use impeller kit 09-808B-1 (MC97).

Johnson Pump 102493918 12V 30 Gpm Talulah Hf Ballast Pump - 10-24939-18 - 189-102493918F1

Reversible pump can quickly fill or drain a ballast tank with either fresh or sea water. Designed for continuous duty usage and has a built-in thermal overload. Ports: External 1-1/2" NPTF. Built in Thermal Overload Protection with automatic reset upon coolingIdeal for system with tank monitoring for overfill and protection against dry-run while emptyingRetrofit ready for existing wake and watersport boats with approved electrical and plumbing specificationsImproved impeller compounds designed for short duration *dry-run events to keep you on the water longerHigh Performance and High Output for intermittent duty cyclesProfessional installation recommended (Acc. to ISO 10133)NOT TO BE USED IN POTABLE WATER SYSTEMS.

Johnson Pump 102476003 F3B-19 Reversible Oil Change Pump, 12V - 10-24760-03 - 189-102476003F1

F3B heavy duty bronze impeller pump for your own oil change setup. Includes an integrated quick reversing switch and a lip seal design, 3/8 NPT connection, and replaceable 189-09843S9 Nitrile impeller designed for oil transfer. Dimensions: 6.7"L x 4.4"W x 4.5"H

Johnson Pump 102469018 12V 13.5 Gpm Talulah Ballast Pump - 10-24690-18 - 189-102469018F1

High performance ballast pump for todays wake and watersport boats. Specifically designed to quickly fill or drain ballast tanks, this 13.5 GPM impeller pump features thermal overload protection with automatic reset upon cooling. Retrofit ready with improved impeller compounds designed for short duration run-dry operation. External 1" hose barb with internal 1/2" NPT female connection for smaller hose option.NOT TO BE USED IN POTABLE WATER SYSTEMS.