Select Category
General
Flush Round Ring Pull 1-5/8 - 1232Dp1Chr - 9-1232Dp1Chrf1
Chrome plated.
Flush Ring Catch - 1051Dp0Chr - 9-1051Dp0Chrf1
Chrome plated zinc with phosphor bronze spring.
Flush Pull - 1221Dp0Chr - 9-1221Dp0Chrf1
Chrome plated zinc with black plastic finishing flange. Spring loaded. Can be mounted horizontally or vertically.
Flush Pull - 1110Dp0Chr - 9-1110Dp0Chrf1
Chrome plated zinc. #6 Fasteners.
Flush Pull - 1016Dp0Blk - 9-1016Dp0Blkf1
Black plastic. Easily installs. #6 Fasteners.
Flush Mount Power Port, White - 1903013 - 627-1903013F1
Power port allows for quick thru-hull connection to a Cannon downrigger power cable. It quickly connects to the yellow female battery end plug from your downrigger, with no need to cut or splice wires. the watertight cover and gasket shield your downrigger plug from corrosion when not in use.
Flush Mount Power Port, Black - 1903012 - 627-1903012F1
Power port allows for quick thru-hull connection to a Cannon downrigger power cable. It quickly connects to the yellow female battery end plug from your downrigger, with no need to cut or splice wires. the watertight cover and gasket shield your downrigger plug from corrosion when not in use.
Flush Mount Drain For Pipe, Chrome/Bronze - 0361005Chr - 9-0361005Chrf1
Chrome plated bronze body w/brass screen. The exterior surface of the flange is machined flat and designed to be countersunk into the hull, resulting in a smooth external fit.
Flush Kit-Dual Wtr Pu Merc-Ete W/Nose Cone Dual Water Pickup - 18-9895 - 47-9895F1
Flush Hatch Lifting Ring (1) - 0575Dp0Chr - 9-0575Dp0Chrf1
Chrome plated.
Flush Hatch Dog - 0777000Chr - 9-0777000Chrf1
For securely "Dogging" (fastening) deck hatches. Chrome plated brass and stainless steel lock nuts. Flush strike. O-ring seals for water resistance. Does not rattle when dogged down. Maximum hatch thickness 2".
Fluid/Oil Extractor, 7.5 Qt. - 69362 - 452-69362F1
This economical, large capacity fluid extractor provides an easier, cleaner way to drain engines with hard to reach drain plugs. Ideal for most fluid extraction (not for corrosive fluids), it includes a tethered cap, easy pour spout, a black 3/32" x 6' extraction tube and clear 11/32" x 6' drain tube. Tubes wrap around tank and are held by storage clamp.
Flow-Rite Mpc104100 System 3 Fill/Empty/Recirc Actuator For V4 Series - Mpc-1-04-100 - 81-Mpc104100F1
Flow-Rite System 3 Actuator For V4 Series
Flow-Rite Mpc103100 System 3 Recirc/Empty/Auto Actuator For V3 Series - Mpc-1-03-100 - 81-Mpc103100F1
Flow-Rite System 3 Actuator For V3 Series
Flow-Rite Mpc101100 System 1 Open/Close Actuator For V1 Series - Mpc-1-01-100 - 81-Mpc101100F1
Flow-Rite System 1 Actuator For V1 Series
Flow-Rite Mp104 Pro Timer Plus+, Packaged - Mp-104 - 81-Mp104F1
Flow-Rite's Livewell Pro Timer Plus™ is a high-quality digital timer designed specifically for use in livewell systems. This compact and easy-to-use timer allows you to control the frequency and duration of the water circulation in your livewell, ensuring that your bait or catch stays healthy and alive for longer periods of time. The Livewell Pro Timer Plus™ is the perfect solution for any angler looking to maximize the performance of their livewell system. The timer can be programmed to run in continuous mode, or set to run for preset intervals of 1, 2, 3, or 4 minutes, with a maximum run time of 12 hours. The Livewell Pro Timer Plus™ is compatible with all Flow-Rite livewell systems and can be easily installed in just a few minutes.ProTimer Plus™ automatically turns your pump on and off for desired circulation and aeration. Set the ProTimer Plus™ to the desired interval and concentrate on fishing. ProTimer Plus™ conserves battery life, is easy to install and operate. It can be connected to an exisiting switch in your boat.ProTimer Plus+ comes with a master control switch to control on, off, or timed livewell operations. 1 Minute on / adj. 1-12 minutes offIncludes 3 position rocker switch for off, timed or constant runFor use with any livewell recirculation pump or Flow-Rite valve system with "RECIRC" modeAuto operation increases fishing timeIdeal for tournament fishingAdjustable time delay feature to meet specific ambient conditionsHelps to increase battery lifeColor coding promotes easy operationSelf-adhesive backing for easy installation; eliminates screwsWeather resistant poly coated circuit board
Flow-Rite Mp103 Pro Timer, Packaged - Mp-103 - 81-Mp103F1
Flow-Rite's Livewell Pro Timer is a high-quality digital timer designed specifically for use in livewell systems. This compact and easy-to-use timer allows you to control the frequency and duration of the water circulation in your livewell, ensuring that your bait or catch stays healthy and alive for longer periods of time. The Livewell Pro Timer is the perfect solution for any angler looking to maximize the performance of their livewell system. The timer can be programmed to run in continuous mode, or set to run for preset intervals of 1, 2, 3, or 4 minutes, with a maximum run time of 12 hours. The Livewell Pro Timer is compatible with all Flow-Rite livewell systems and can be easily installed in just a few minutes.ProTimer automatically turns your pump on and off for desired circulation and aeration. Set the ProTimer to the desired interval and concentrate on fishing. ProTimer conserves battery life, is easy to install and operate. It can be connected to an exisiting switch in your boat. Automatic operation increases fishing timeIdeal for tournament fishingAdjustable time delay feature to meet specific ambient conditionsConserves battery life, is easy to install and easy to operateColor coding promotes ease of proper operationSelf-adhesive backing for easy installation; eliminates mounting screwsWeather resistant Poly coated circuit board
Flow-Rite Mb001 Qwik-Lok™ Standpipe Drain Bundle 1-1/8" - Mb-001 - 81-Mb001F1
Keep your fish healthy and maintain a consistent water level in your livewell with Flow-Rite's Standpipe Drain Bundle. The livewell can be easily drained by removing the standpipe or by unscrewing it to expose small drain holes in the base. ^Kit Includes:12" Standpipe, 1-1/8" Thru-hull,90° Elbow, Qwik-Lok straight socket, HoseClamps, 1-1/8" x 6' Hose, 1-1/8" Straight thru-hull.
