Select Category
General
Cable Clam, 1.385" - 1003-Bss - 661-1003F1
Save the expense of removing and replacing connectors. They allow waterproof co-axial installation without removing connectors and help avoid poor connections from removing factory connectors. Come with stainless screws.
Cable Clam, .825" - 1002-Bss - 661-1002F1
Save the expense of removing and replacing connectors. They allow waterproof co-axial installation without removing connectors and help avoid poor connections from removing factory connectors. Come with stainless screws.
Cable Clam, .625" - 1001-Bss - 661-1001F1
Save the expense of removing and replacing connectors. They allow waterproof co-axial installation without removing connectors and help avoid poor connections from removing factory connectors. Come with stainless screws.
Cable Cap Stud Res .700X.300 - 4010-Bss - 661-4010F1
For stud type connectors on alternators, starters, windlasses and other High amperage devices.
Cable Cap Stud Red 1X.500 - 4012-Bss - 661-4012F1
For stud type connectors on alternators, starters, windlasses and other High amperage devices.
Cable Cap Stud Red 1.25X.700 - 4014-Bss - 661-4014F1
For stud type connectors on alternators, starters, windlasses and other High amperage devices.
Cable Cap Stud Black 2/Cd - 4011-Bss - 661-4011F1
For stud type connectors on alternators, starters, windlasses and other High amperage devices.
Cable Cap Standardlg. 2/Cd - 4006-Bss - 661-4006F1
For batteries with marine adapter terminals added on. Sold as a pair. Red/Black.
Cable Cap Standard Sm 2/Cd - 4005-Bss - 661-4005F1
For batteries with marine adapter terminals added on. Sold as a pair. Red/Black.
Cable Buddy-Lubrication Syste - 420 - 166-420F1
A complete system to lubricate and protect your steering cable from corrosion and wear. Works on all steering cables. Lubricates and virtually eliminates all wear in the inner cable, where most problems occur. Prevents corrosion and freezing to -40° F.
Cab-O-Sil - 702130 - 349-702130F1
Thickening agent additive for resins and gel coats. Used to prevent sagging.
C.E. Smith 53690A Drop-In Swivel - 53690A - 618-53690Af1
Instantly converts any in-gunnel rod holder to a swivel rod holder. Fits inside any rod holder with 1-9/16" or larger inside diameter. Investment cast 316L stainless construction. Smooth turning adjustable swivel resistance.
C.E. Smith 53683A Backing Plate, 70 Series - 53683A - 618-53683Af1
Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. Regular nuts and washers can concentrate stress and cause spider cracking around your rod holders or perhaps even tear through causing severe gunnel damage. Available for 70 series and 80 series rod holders. Each size fits all 3 models of the Series. Use your 1/4" stainless bolts and nuts (hardware not included).
C.E. Smith 53682Ca 80 Series Flush Mount Rod Holders, Cast, 30 Degree - 53682Ca - 618-53682Caf1
White liner color316L Stainless steel1-7/8" Inner diameter Fits 2-1/2" hole diameterCap size 5-1/8" long x 4-1/4" wide10-1/2" Tube length
C.E. Smith 53681Sa 80 Series Flush Mount Rod Holders, Swivel, 15 Degree - 53681Sa - 618-53681Saf1
White liner color316L Stainless steel1-7/8" Inner diameter Fits 2-1/2" hole diameterCap size 5-1/8" long x 4-1/4" wide10-1/2" Tube length
C.E. Smith 53681Ca 80 Series Flush Mount Rod Holders, Cast, 15 Degree - 53681Ca - 618-53681Caf1
White liner color316L Stainless steel1-7/8" Inner diameter Fits 2-1/2" hole diameterCap size 5-1/8" long x 4-1/4" wide10-1/2" Tube length
C.E. Smith 53680Sa 80 Series Flush Mount Rod Holders, Swivel, 0 Degree - 53680Sa - 618-53680Saf1
White liner color316L Stainless steel1-7/8" Inner diameter Fits 2-1/2" hole diameterCap size 5-1/8" long x 4-1/4" wide10-1/2" Tube length
C.E. Smith 53680Ca 80 Series Flush Mount Rod Holders, Cast, 0 Degree - 53680Ca - 618-53680Caf1
White liner color316L Stainless steel1-7/8" Inner diameter Fits 2-1/2" hole diameterCap size 5-1/8" long x 4-1/4" wide10-1/2" Tube length
C.E. Smith 53673A Backing Plate, 70 Series - 53673A - 618-53673Af1
Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. Regular nuts and washers can concentrate stress and cause spider cracking around your rod holders or perhaps even tear through causing severe gunnel damage. Available for 70 series and 80 series rod holders. Each size fits all 3 models of the Series. Use your 1/4" stainless bolts and nuts (hardware not included).
C.E. Smith 53672Ca 70 Series Flush Mount Rod Holders, Cast, 30 Degree - 53672Ca - 618-53672Caf1
Feature a wide low profile cap for excellent mounting strength and to enhance the appearance of any boat. 100% welded cap to tube joint will never break. Super tough 1/4" wide x 1/2" tall gimbal bar will stand up to virtually any punishment heavy tackle or downrigger mounts can dish out. White vinyl liner protects rods and is keyed with the gimbal bar to eliminate liner twist. White liner color316L Stainless steel1-5/8" Inner diameter, Fits 2-3/16" hole diameter1/4" wide x 1/2" wide gimbal bar9" Tube length
