Select Category
General
Syringes (2/Pk) - 807-2 - 655-8072F1
Reusable. Load with epoxy mixture for injecting into tight spots. Ideal for hardware bonding and plywood repairs.
T-H Bounce Buster Coaster - Bbc-1-Dp - 232-Bbc1Dpf1
Protects Decks from Bounce Buster DamageFits Minn Kota Bow Mount Stabilizer RodsFits into Deep Carpet with PadProtects Carpeted Decks from Damage
T-H Marine 12V Pro Live Well Oxygenator - O2Bk3Dp - 232-O2Bk3Dpf1
The Oxygenator™ Pro Live Well Flush Mount will retrofit most boat live wells from 10 to 20 gallons and silently operates off the existing boat battery. The Oxygenator™ manufactures 100% pure oxygen by splitting the hydrogen molecule from the oxygen molecule in water. This creates a super saturated oxygen environment, even in the warmest water. 3 Year warranty.
T-H Marine All Purpose 90° Drain, Concave - Apd-190-Dp - 232-Apd190Dpf1
A low cost method to drain water from virtually anywhere. They have a very low profile head to allow complete drainage. Drains mount easily in a 1-3/8" diameter hole and are secured with the molded nut that is included. Hose barbs fit 3/4" hose for routing of drainage.
T-H Marine All Purpose Straight Drain, Concave - Apd-1-Dp - 232-Apd1Dpf1
A low cost method to drain water from virtually anywhere. They have a very low profile head to allow complete drainage. Drains mount easily in a 1-3/8" diameter hole and are secured with the molded nut that is included. Hose barbs fit 3/4" hose for routing of drainage.
T-H Marine Clam Shell Vent (2 Per Pack) - Cs-2-Dp - 232-Cs2Dpf1
Molded, UV and weather resistant.
T-H Marine Clam Shell Vent (2 Per Pack) - Cs1Dp - 232-Cs1Dpf1
Molded, UV and weather resistant.
T-H Marine Clam Shell Vent (2 Per Pack) - Css1Dp - 232-Css1Dpf1
Molded, UV and weather resistant.
T-H Marine Ez-Pump Long 4-3/4" - Ezblk1Dp - 232-Ezblk1Dpf1
UV Stable and rust resistant 3 Sizes fits most installationsEasy installation - no drilling or running hosesScreen and pick-up- All in oneKeeps fish and bait alive longerPrevents livewell system air lockExtends battery life
T-H Marine Ez-Pump Long 4-3/4" - Ezwht1Dp - 232-Ezwht1Dpf1
UV Stable and rust resistant 3 Sizes fits most installationsEasy installation - no drilling or running hosesScreen and pick-up- All in oneKeeps fish and bait alive longerPrevents livewell system air lockExtends battery life
T-H Marine Ez-Pump Medium 3-3/8" - Ezblk2Dp - 232-Ezblk2Dpf1
UV Stable and rust resistant 3 Sizes fits most installationsEasy installation - no drilling or running hosesScreen and pick-up- All in oneKeeps fish and bait alive longerPrevents livewell system air lockExtends battery life
T-H Marine Ez-Pump Medium 3-3/8" - Ezwht2Dp - 232-Ezwht2Dpf1
UV Stable and rust resistant 3 Sizes fits most installationsEasy installation - no drilling or running hosesScreen and pick-up- All in oneKeeps fish and bait alive longerPrevents livewell system air lockExtends battery life
T-H Marine Fixed Standoff Rod Holder 11-7/8" L Fits 2" Hole, Off-White - Rhsf3Wdp - 232-Rhsf3Wdpf1
Stand-off rod holder is made of injection molded poly material for strength and durability. A slot is provided for the reel to slip into to prevent the rod from moving. Saddle mounts are provided.
T-H Marine Hot Foot Slide Mount - Hfm1Dp - 232-Hfm1Dpf1
Hot Foot adjustable slide mount allows for easy adjustment of throttle position to accommodate different drivers. With over 5" of adjustment it's the perfect solution for the family with multiple drivers. Aluminum and stainless.
T-H Marine Hot Trim Floor Mounted Trim Control - Ht1Dp - 232-Ht1Dpf1
Floor mounted trim control. Mounts in floor of boat under console allowing operator to trim engine with foot. Comes prewired with wiring instructions to connect it to existing trim wiring.
T-H Marine Large Cup Holder, Black - Lch1Dp - 232-Lch1Dpf1
Made from super-tough poly material which resists sunlight, breakage and chemicals. The holder is UV tested and will not fade as others do. Hose fitting on the bottom to accept a 3/8" I.D. hose. Any spills, spray or rain water can be drained to the bilge area.
T-H Marine Large Cup Holder, White - Lch1Wdp - 232-Lch1Wdpf1
Made from super-tough poly material which resists sunlight, breakage and chemicals. The holder is UV tested and will not fade as others do. Hose fitting on the bottom to accept a 3/8" I.D. hose. Any spills, spray or rain water can be drained to the bilge area.
T-H Marine Lblrbs113S Loc-R-Bar™ Complete Alarm System - Lblrbs113S - 232-Lblrbs113Sf1
Loc-R-Bar™ Alarm System is a self-contained, full package of protection for your valuable fishing gear and all of your equipment for less than the cost of a quality rod and reel. Adjustable stainless steel security bars, solid aluminum mounting brackets and the innovative Loc - Alarm completes the system. The system secures all deck lockers by extending across the entire deck surface, gunwale to gunwale. Even if thieves break out your hatch locks, they will not be able to open the lockers to get to your equipment. No wiring, sensors or complicated installation required. Full storage locking system includes an alarm padlock and mounting brackets.
T-H Marine Lbsetbks03A03B Loc-R-Bar™ Mounting Bracket, Pr. - Lbsetbks03A03B - 232-Lbsetbks03A03Bf1
Extra mounting brackets. Sold in pairs.
T-H Marine Lid & Hatch Support Spring With Molded Nylon Ends 7/16" X 8-1/2" L - Ls-2 - 232-Ls2Dpf1
The stainless steel spring then supports the lid, hatch or cover in the open position. Stainless steel spring with nylon ends for mounting with four countersunk screws (not included).
T-H Marine Max-Air Venturi With Face Plate And 6' Tubing - Mav2Ktdp - 232-Mav2Ktdpf1
With face plate and 6' tubingDraws fresh air from outside the livewell and injects tiny air bubbles into the water flowing into the livewell. Aerated water enters the well at a lower level than with traditional spray heads. The reduced restriction of this fitting allows more water to flow from the pump, works well on fresh water intake or recirculation systems. Faceplate can be mounted anywhere above the water line.
T-H Marine Pontoon Door Stops With Ribs Fits Up To 1-1/4" Tubing - Ds1Ldp - 232-Ds1Ldpf1
For Pontoon Boats.Injection molded, designed to fit 1-1/4" square tubing. Anti-rattle. Requires no welding. Simple installation with one #10 screw.
T-H Marine Pontoon Door Stops With Ribs Fits Up To 1-1/4" Tubing - Ds1Rdp - 232-Ds1Rdpf1
For Pontoon Boats.Injection molded, designed to fit 1-1/4" square tubing. Anti-rattle. Requires no welding. Simple installation with one #10 screw.
