Select Category
General
Attwood Collector Box For 1423,1424,1425,1426,1494,1496A - 1341-1 - 23-13411F1
Cut-outs for two 3' I.D. hoses. Corrosion-resistant plastic. For use w/plastic venturi, flush louvered, or trimline vent.
Attwood Collector Box For 1495 Vent - 1345-1 - 23-13451F1
Use with plastic louvered vent, with two 3" I.D. wire supported ventilation hoses. Box fastens to vent with screws or pop rivets, vent then fastens to the deck. Corrosion-resistant plastic.
Attwood Cowl Ventilator 6" - 1364A3 - 23-1364A3F1
Can be used with any standard 3" ventilation hose. Features flexible hose flange that is screwed onto hose, then snaps onto the flange. The neck extends 1" below deck. Chrome-plated zinc. Flange is non corrosive plastic. Installs with #8 fasteners.
Attwood Deck Plate 6" White - 12792-1 - 23-127921F1
Allows additional storage options to your canoe, kayak or small boat access unusable spaces and for inspection of and general access to valves and deck vents. Easy opening, screw-out design - no tools required. High-impact ABS plastic with textured surface. Durable, rugged, weather-resistant. Flange is pre-drilled for #8 screws.
Attwood Extension Aluminum 16" Threaded - 2164-T - 148-2164Tf1
Fixed height 3/4" pin post. 1.5" diameter brushed aluminum posts. Steel pin.
Attwood Flush Base For Sure Grip Rod Holder - 1158245 - 23-50713F1
Fit a variety of mounting surfaces including rails Constructed of extruded aluminum
Attwood Flush Cleat 4-1/2" - 66512-7 - 23-665127F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 4-1/2", Counter-Sunk - 66510-7 - 23-665107F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 6" - 66516-7 - 23-665167F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 8" - 66524-1 - 23-665241F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Fold Up Drink Holder Black - 199241 - 23-24457F1
Dual ring. Holds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mounts quickly and easily on boats or RVs. Flip the small ring up to hold small drinks. For large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. Closed depth of just 7/8". Four holes for #10 screws. Polycarbonate construction.
Attwood Fold Up Drink Holder White - 200702 - 23-24497F1
Dual ring. Holds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mounts quickly and easily on boats or RVs. Flip the small ring up to hold small drinks. For large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. Closed depth of just 7/8". Four holes for #10 screws. Polycarbonate construction.
Attwood Herreshoff Cleat Heavy Duty, 8" - 66110-3 - 23-661103F1
This heavy-duty herreshoff is a wider, taller, heavier version of the herreshoff cleat. Enhanced 316 Stainless Steel construction. Four holes for required fasteners.
Attwood Hollow Base Cleat Die Cast Zamak With Chrome Finish 4-1/2" (2/Pk) - 1586767 - 23-62446F1
The clean lines and modern look of these cleats are in tune with styling of today's boats. Enhanced 316 Stainless Steel construction.
Attwood Large Flush Lift Ring, Chrome Plated Brass - 520532 - 23-33253F1
Chrome-plated brass. Provides strength for lifting large and heavy hatch covers.
Attwood Louvered Vent Flush Mount-Black - 1423-5 - 23-14235F1
Canted louvers deflect rain and spray and help conceal the collector box. Black ABS plastic. Installs flush to the hull with #8 screws. Use with 13411 collector box for 3" system. Dimensions: 17-9/16" L x 2-3/4" H x 1/4" D
Attwood Louvered Vent Flush Mount-White - 1425-5 - 23-14255F1
Canted louvers deflect rain and spray and help conceal the collector box. Black ABS plastic. Installs flush to the hull with #8 screws. Use with 13411 collector box for 3" system. Dimensions: 17-9/16" L x 2-3/4" H x 1/4" D
Attwood Louvered Vent, Off White - 1495-1 - 23-14951F1
Constructed of paintable, corrosion-resistant ABS plastic with no sharp edges. For 3" I.D. ventilation system use with 13451 collector box. Installs with #8 fasteners. Dimensions: 17-7/8" L x 3-7/16" H x 3/4" D
Attwood Neat Cleat 4-1/2" - 66515-7 - 23-665157F1
A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8" stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw.
Attwood Neat Cleat 6" - 66517-7 - 23-665177F1
A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8" stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw.
Attwood Neat Cleat 8" - 66519-1 - 23-665191F1
A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8" stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw.
Attwood Nylon Bushing For Bases And Posts - Sp-201 - 148-Sp201F1
Nylon Bushing for Bases and Posts
Attwood Push/Pull Switch Three-Position - 2079752 - 23-75943F1
Quality metal with chrome plating and pebble finish pull. Fits 3/8" dia. hole.
Attwood Push/Pull Switch Two-Position - 2068521 - 23-75636F1
Quality metal with chrome plating and pebble finish pull. Fits 3/8" dia. hole.
Attwood Rectangular Flush Hatch Pull - 46569 - 23-20277F1
The new low profile flush hatch pull is an easy access handle for installation in lids, doors, compartments and hatches. Handle is easy to grip, even with gloved hands. Durable ABS construction with black textured finish.
