Select Category
General
Wdfi 2 Cycle @2 2.5Gal Mercury/Quicksilver - 8M0229800 - 710-92-8M0229800F1
Wdfi 2 Cycle @2 2.5Gal Ss<92-881108K 1 - 858038K01 - 710-92-858038K01 Superseded By: 710-92-8M0229800F1
Wdrive Inst Kit @ 2 Bravo Bravo Mmpp Pkg - 16755T1 - 710-16755T1F1
Weather Deck Toggle Switch, Off/Mom On - 4151-Bss - 661-4151F1
Weather Resist Toggle Switch Replaces Blue Sea 4306 - Sp21040 - 11-Sp21040F1
Weaver 1001 1-Part Pvc Glue, 30 Ml - Pvc1001 - 957-1001F1
To be used for temporary repair and patches only. DO NOT use for Davits or Handles.
Weaver Arcf Front Arc - Frontarc - 957-Arcff1
A fully adjustable 3-point mounting pad unit that glues to the fiberglass floor of inflatable dinghies. The unique design allows for a wide variety of adjustment points for most modern inflatables. A valuable companion to the Weaver Arc that is mounted on the transom. Together, the Weaver Arc and the Weaver Front Arc are highly effective in transferring the weight of inflatables to the Weaver Snap Davits.Weaver worksheet must be filled out as this product is custom tailored.Visit weaverindustries.com for Additional Info & Measurement Instructions
Weaver C1000Rem Standard Dinghy Chocks, 4/Pk - C1000Crem - 957-C1000Remf1
Universal chocks for mounting a hard bottomed dinghy on the deck or bridge of a yacht. Standard: Pads go back and forth in one direction.
Weaver C1204Rem Swivel (Removable) Dinghy Chocks, 4/Pk - C1204Crem - 957-C1204Remf1
Universal chocks for mounting a hard bottomed dinghy on the deck or bridge of a yacht. Swivel: Pads swivel in any direction and can be adjusted up by using spacer bolts (sold separately). Removable: Includes Removable bases that let you remove the stanchions from your deck or bridge if you have an area you use for other purposes.
Weaver C1207Rem Swivel (Removable) Dinghy Chocks, 4/Pk - C1207Crem - 957-C1207Remf1
Universal chocks for mounting a hard bottomed dinghy on the deck or bridge of a yacht. Swivel: Pads swivel in any direction and can be adjusted up by using spacer bolts (sold separately). Removable: Includes Removable bases that let you remove the stanchions from your deck or bridge if you have an area you use for other purposes.
Weaver C1208Rem Swivel (Removable) Dinghy Chocks, 4/Pk - C1208Crem - 957-C1208Remf1
Universal chocks for mounting a hard bottomed dinghy on the deck or bridge of a yacht. Swivel: Pads swivel in any direction and can be adjusted up by using spacer bolts (sold separately). Removable: Includes Removable bases that let you remove the stanchions from your deck or bridge if you have an area you use for other purposes.
Weaver Hoistleaver Hoist/Leaver - Hoist Delux - 957-Hoistleaverf1
Pick up your dinghy and motor at the same time using our foot operated hoist. Lifting from the Leaver bracket that your dinghy motor is attached to, the dinghy raises at the same time as the motor is swinging out over the swim platform. After the dinghy and motor are brought into the vertical position, the hoist remains hooked up to the dinghy/motor. For hard bottom dinghies. You will need to order the HDRBD202 davit system (not included) and at least one stand-off bracket at the bow of the inflatable for more stabilization. HD-RBD202 required for hoist/leaver installation, sold separately.Weaver worksheet must be filled out as this product is custom tailored.Visit weaverindustries.com for Additional Info & Measurement Instructions
Weaver Leaverm3P Model 3 Weaver Leaver, Port Side - Lvr-M3-P - 957-Leaverm3Pf1
Designed to be used with Weaver Snap Davits. It allows your outboard to remain upright while your inflatable is in the vertical position. The Weaver Leaver is made of rugged stainless steel and accommodates outboards that are mounted to pivot either to the port or starboard. 13" of clear transom is required. Will not work with motors that have power trim and tilt. These units are easily switched port to starboard. Model 3: For deep transoms up to 6" down from the top of the tube. Visit weaverindustries.com for Additional Info & Measurement Instructions
Weaver Leaverm3S Model 3 Weaver Leaver, Starboard Side - Lvr-M3-S - 957-Leaverm3Sf1
Designed to be used with Weaver Snap Davits. It allows your outboard to remain upright while your inflatable is in the vertical position. The Weaver Leaver is made of rugged stainless steel and accommodates outboards that are mounted to pivot either to the port or starboard. 13" of clear transom is required. Will not work with motors that have power trim and tilt. These units are easily switched port to starboard. Model 3: For deep transoms up to 6" down from the top of the tube. Visit weaverindustries.com for Additional Info & Measurement Instructions
Weaver Leaverstdp Standard Weaver Leaver, Port Side - Leaver-P - 957-Leaverstdpf1
Designed to be used with Weaver Snap Davits. It allows your outboard to remain upright while your inflatable is in the vertical position. The Weaver Leaver is made of rugged stainless steel and accommodates outboards that are mounted to pivot either to the port or starboard. 13" of clear transom is required. Will not work with motors that have power trim and tilt. These units are easily switched port to starboard. Standard: For transoms up to 4" down from the top of the tube. Visit weaverindustries.com for Additional Info & Measurement Instructions
Weaver Leaverstds Standard Weaver Leaver, Starboard Side - Leaver-S - 957-Leaverstdsf1
Designed to be used with Weaver Snap Davits. It allows your outboard to remain upright while your inflatable is in the vertical position. The Weaver Leaver is made of rugged stainless steel and accommodates outboards that are mounted to pivot either to the port or starboard. 13" of clear transom is required. Will not work with motors that have power trim and tilt. These units are easily switched port to starboard. Standard: For transoms up to 4" down from the top of the tube. Visit weaverindustries.com for Additional Info & Measurement Instructions
Weaver Motokr8 Weaver Moto Kicker Swim Platform Motor Bracket - Moto-Kr8 - 957-Motokr8F1
This trolling motor fixed bracket is designed to install on a swim platform. It will hold up to a 9.9 hp 4 stroke engine. Made for the marine enviroment from 304 s/s with welded seams. The mounting pad is made from Starboard. Bracket dimensions 11.25"W x 5"D (+1.5" Pad) x 8"H.
Weaver Mss Motosto Swim Platform Motor Bracket - Motosto-Sw - 957-Mssf1
Allows you to remove your motor from your dinghy and place it on the swim platform in a horizontal position before getting out of your dinghy. The bracket is removable from the swim step leaving a low profile receiver plate on the swim platform similar to the Weaver Quick Kit bracket. Dimensions 13" W x 5" D x 10" H.
Weaver Mst Motosto Transom Mount Motor Bracket - Motosto-Tr - 957-Mstf1
Allows you to store your 15 hp or smaller on the transom of your yacht. When under way the bracket is in normal position and when using the motor the bracket can be swung out of the way against the transom. This bracket is not removable.
Weaver Quick Kit, 2/Pk - Quickkit - 957-Quickf1
Receiver plates for easy removal of the Davit Heads from the swim platform for use with the RBD100 and SSHR for the SD1. Comes with all the mounting hardware plus the pin and lanyard. Not to be used with RS150.
Weaver Rs110 Standard Davit Head - Rs110 - 957-Rs110F1
For RBD100. Sold by the each.
