Select Category
General
Beckson Pry-Out Deck Plate With Standard Trim Ring, Diamond Center - Dp85-W - 35-Dp85Wf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Diamond Center - Dp85N - 35-Dp85Nf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Dimple Center - Dp63-W - 35-Dp63Wf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Dimple Center - Dp83-B - 35-Dp83Bf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Dimple Center - Dp83-W - 35-Dp83Wf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Smooth Center - 35-Dp81W - 35-Dp81Wf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Smooth Center - Dp61-W - 35-Dp61Wf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Rain Drain Opening Port - Po414Dwc-10 - 35-Po414Dwc10F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po414Dws10 - 35-Po414Dws10F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po512Dbs20 - 35-Po512Dbs20F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po512Dwc10 - 35-Po512Dwc10F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po512Dwc20 - 35-Po512Dwc20F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po512Dws10 - 35-Po512Dws10F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po714Dwc10 - 35-Po714Dwc10F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po714Dwc20 - 35-Po714Dwc20F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Replacement Hook Only For Hook-Mate Boat Hooks, Red - Hmr - 35-Hmrf1
Strong, lightweight and have non-conductive plastic clad design which floats. Vinyl clad shaft will not splinter or crack. Unique double-ball design permits pushing, pulling and retrieving without slipping. Guaranteed for 5 years. Red handle.
Beckson Replacement Safety Twist Knobs Only 1/4-20 Black (2 Per Pack) - Prtb - 35-Prtbf1
Designed with drain molded on inside of spigot. Promotes drainage without angle cuts in hull. Allow for thru-bolting. Seats tightly against gasket and lens omitting internal water retention ledge. No water fall when opening after a rain. Ideal for mounting where installation is within 15° of vertical or where no drain is necessary. Patented. All self-drain ports have a White body and a clear window. 1" spigot.
Beckson Screen For Self Drain Opening Port - Scr512 - 35-Scr512F1
Screen for Beckson PO512 series opening ports.
Beckson Sea Kayak With Float-A-Pump Sleeve 1-3/4 X 18", 8 Gpm - 318P1Fps3R - 35-318P1Fps3Rf1
Float-A-Pump sleeve. Designed specifically with the sea-kayaker in mind. Includes a reinforcing shaft which prevents the pump shaft from flexing in a rolling sea and won't effect a compass.
Beckson Soft Cowl Vent 4-7/8" W X 5-1/8" D X 2" H, White - Sc-7 - 35-Sc7F1
PVC. Ideal for areas where vent will be under foot or foul lines.
Beckson Soft-Mate Beverage Holder, Black - Hh-61B - 35-Hh61Bf1
HH61: This is a two step model, molded from soft flexible material. The inner step holds cans and air horns like the HH-6, but the outer step holds can with insulators, wine bottles, etc. Uses screws to mount.
Beckson Soft-Mate Beverage Holder, White - Hh61 - 35-Hh61F1
HH61: This is a two step model, molded from soft flexible material. The inner step holds cans and air horns like the HH-6, but the outer step holds can with insulators, wine bottles, etc. Uses screws to mount.
