General

C.E. Smith 27575 Pwc Dolly, 34" W X 48" L X 19" H - 27575 - 618-27575F1

C.E. Smith, Miscellaneous

$601.74

Ideal for moving a small vessel such as a Jet Ski, Jon Boat, Small Sailboat, Dingy, or Inflatable around on any hard surface. Great for moving a vessel into a storage space or as a vessel display platform in a showroom. 1-1/2" square galvanized steel tubingRugged 4" castersTopped with 4' long carpeted bunks that adjust to gently support the vesselBunk spacing can be set at 12", 16" or 20"1,000 lb capacity

C.E. Smith 27580 Outboard Motor Dolly, Red - 27580 - 618-27580F1

C.E. Smith, Miscellaneous

$441.29

Easily transport motors weighing up to 250 lbs45" Overall heightFolds flat for convenient storage

C.E. Smith 27627 Pvc Post Guide-Ons, 40", 75 Degree Bend, White - 27627 - 618-27627F1

C.E. Smith, Miscellaneous

$181.24

Visual markers when backing trailers down the rampFits frames up to 3" wide by 4-1/4" tallMetal uprights allow for 13" of side adjustment1-1/2"Square 16 ga. pre-galvanized steel uprights

C.E. Smith 27637 Pvc Post Guide-Ons, 65", Hot Dip Galvanized - 27637 - 618-27637F1

C.E. Smith, Miscellaneous

$529.24

Allows you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. Mounting hardware included. Sold in pairs. Adjusts out to 13" each Side Fits Frames up to 3" W x 4-1/4" HMade in the USAFor larger trailer frames check out our Large Frame U-Bolt Kit (11416).Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side).Check with your state Department of Transportation for restrictions regarding maximum trailer width.

C.E. Smith 27638 Pvc Post Guide-Ons - 27638 - 618-27638F1

C.E. Smith, Miscellaneous

$529.24

Allows you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. Mounting hardware included. Sold in pairs. Adjusts out to 13" each Side Fits Frames up to 3" W x 4-1/4" HMade in the USAFor larger trailer frames check out our Large Frame U-Bolt Kit (11416).Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side).Check with your state Department of Transportation for restrictions regarding maximum trailer width.

C.E. Smith 27640 Pvc Post Guide-Ons, 60", White - 27640 - 618-27640F1

C.E. Smith, Miscellaneous

$260.99

Allows you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. Mounting hardware included. Sold in pairs. Adjusts out to 13" each Side Fits Frames up to 3" W x 4-1/4" HMade in the USAFor larger trailer frames check out our Large Frame U-Bolt Kit (11416).Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side).Check with your state Department of Transportation for restrictions regarding maximum trailer width.

C.E. Smith 27646 Pvc Post Guide-Ons, 60", Black - 27646 - 618-27646F1

C.E. Smith, Miscellaneous

$260.99

Allows you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. Mounting hardware included. Sold in pairs. Adjusts out to 13" each Side Fits Frames up to 3" W x 4-1/4" HMade in the USAFor larger trailer frames check out our Large Frame U-Bolt Kit (11416).Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side).Check with your state Department of Transportation for restrictions regarding maximum trailer width.

C.E. Smith 27647 Pvc Post Guide-Ons, 40", 75 Degree Bend, Black - 27647 - 618-27647F1

C.E. Smith, Miscellaneous

$181.24

Visual markers when backing trailers down the rampFits frames up to 3" wide by 4-1/4" tallMetal uprights allow for 13" of side adjustment1-1/2"Square 16 ga. pre-galvanized steel uprights

C.E. Smith 27670 Pontoon Pvc Post Guide-Ons - 27670 - 618-27670F1

C.E. Smith, Miscellaneous

$163.84

These guide-ons mount on top of rear cross member and fit in between the pontoons to center your boat on the trailer. Mounting hardware included. Sold in pairs. Fit up to 3" W x 4-1/4" H frames. 1-1/2" square 16 gauge pre-galvanized steel uprights. 2-3/8" diameter white PVC posts.

C.E. Smith 53670A 70 Series Flush Mount Rod Holders, Bar, 0 Degree - 53670A - 618-53670Af1

C.E. Smith, Miscellaneous

$152.69

Feature a wide low profile cap for excellent mounting strength and to enhance the appearance of any boat. 100% welded cap to tube joint will never break. Super tough 1/4" wide x 1/2" tall gimbal bar will stand up to virtually any punishment heavy tackle or downrigger mounts can dish out. White vinyl liner protects rods and is keyed with the gimbal bar to eliminate liner twist. White liner color316L Stainless steel1-5/8" Inner diameter, Fits 2-3/16" hole diameter1/4" wide x 1/2" wide gimbal bar9" Tube length

C.E. Smith 53670Ca 70 Series Flush Mount Rod Holders, Cast, 0 Degree - 53670Ca - 618-53670Caf1

C.E. Smith, Miscellaneous

$164.89

Feature a wide low profile cap for excellent mounting strength and to enhance the appearance of any boat. 100% welded cap to tube joint will never break. Super tough 1/4" wide x 1/2" tall gimbal bar will stand up to virtually any punishment heavy tackle or downrigger mounts can dish out. White vinyl liner protects rods and is keyed with the gimbal bar to eliminate liner twist. White liner color316L Stainless steel1-5/8" Inner diameter, Fits 2-3/16" hole diameter1/4" wide x 1/2" wide gimbal bar9" Tube length

C.E. Smith 53671A 70 Series Flush Mount Rod Holders, Bar, 15 Degree - 53671A - 618-53671Af1

C.E. Smith, Miscellaneous

$152.69

Feature a wide low profile cap for excellent mounting strength and to enhance the appearance of any boat. 100% welded cap to tube joint will never break. Super tough 1/4" wide x 1/2" tall gimbal bar will stand up to virtually any punishment heavy tackle or downrigger mounts can dish out. White vinyl liner protects rods and is keyed with the gimbal bar to eliminate liner twist. White liner color316L Stainless steel1-5/8" Inner diameter, Fits 2-3/16" hole diameter1/4" wide x 1/2" wide gimbal bar9" Tube length

C.E. Smith 53671Ca 70 Series Flush Mount Rod Holders, Cast, 15 Degree - 53671Ca - 618-53671Caf1

C.E. Smith, Miscellaneous

$164.89

Feature a wide low profile cap for excellent mounting strength and to enhance the appearance of any boat. 100% welded cap to tube joint will never break. Super tough 1/4" wide x 1/2" tall gimbal bar will stand up to virtually any punishment heavy tackle or downrigger mounts can dish out. White vinyl liner protects rods and is keyed with the gimbal bar to eliminate liner twist. White liner color316L Stainless steel1-5/8" Inner diameter, Fits 2-3/16" hole diameter1/4" wide x 1/2" wide gimbal bar9" Tube length

C.E. Smith 53672A 70 Series Flush Mount Rod Holders, Bar, 30 Degree - 53672A - 618-53672Af1

C.E. Smith, Miscellaneous

$152.69

Feature a wide low profile cap for excellent mounting strength and to enhance the appearance of any boat. 100% welded cap to tube joint will never break. Super tough 1/4" wide x 1/2" tall gimbal bar will stand up to virtually any punishment heavy tackle or downrigger mounts can dish out. White vinyl liner protects rods and is keyed with the gimbal bar to eliminate liner twist. White liner color316L Stainless steel1-5/8" Inner diameter, Fits 2-3/16" hole diameter1/4" wide x 1/2" wide gimbal bar9" Tube length

C.E. Smith 53672Ca 70 Series Flush Mount Rod Holders, Cast, 30 Degree - 53672Ca - 618-53672Caf1

C.E. Smith, Miscellaneous

$164.89

Feature a wide low profile cap for excellent mounting strength and to enhance the appearance of any boat. 100% welded cap to tube joint will never break. Super tough 1/4" wide x 1/2" tall gimbal bar will stand up to virtually any punishment heavy tackle or downrigger mounts can dish out. White vinyl liner protects rods and is keyed with the gimbal bar to eliminate liner twist. White liner color316L Stainless steel1-5/8" Inner diameter, Fits 2-3/16" hole diameter1/4" wide x 1/2" wide gimbal bar9" Tube length

C.E. Smith 53673A Backing Plate, 70 Series - 53673A - 618-53673Af1

C.E. Smith, Miscellaneous

$43.49

Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. Regular nuts and washers can concentrate stress and cause spider cracking around your rod holders or perhaps even tear through causing severe gunnel damage. Available for 70 series and 80 series rod holders. Each size fits all 3 models of the Series. Use your 1/4" stainless bolts and nuts (hardware not included).