Select Category
General
Lewmar Profish Upgrade Kit - 66000616 - 239-66000616F1
Converts a Pro-Series windlass to a ProFish freefall windlass. The kit can only be fitted to Pro-Series units made from Oct 2006 onwards. To check compatibility undo gypsy nut and check to see if there is a drilled, threaded hole in the end of the shaft. If no hole is visable then this cannot be retrofitted.
Lewmar Retro-Fit Vent Trim For Deck Install - 361042992 - 239-361042992F1
Trim for deck fitting a retro-fit vent.
Lewmar Retro-Fit Vent, Grey - 361041990 - 239-361041990F1
Vent can be fitted to the acrylic lens of any Lewmar hatch or to the deck*Made from the same rugged composite used in many Lewmar hatchesStyled to match the Low and Medium Profile hatchesCaptive bung to close the ventilator © it cannot be lostFits deck thickness to 100mm (3.93")Tested to CE ISO 12216 and leak testedNo sealant required for hatch fitting* Trim sold separately for deck fitting
Lewmar T-Track Genoa Car W/Plunger, Size 2 - 29042700 - 239-29042700F1
Fits standard 32mm (1-1/4") T-Track.
Lewmar Thruster Motor Support Bracket Kit, 140Tt - 589096 - 239-589096F1
A complete thruster system consists of a thruster unit, control panel, control cable, fuse holder, fuse and tunnel.
Lewmar Tunnel, 5-1/2" (140 Mm) X 3'3" - 589102 - 239-589102F1
Tunnel only, fits 140TT Thrusters.
Lewmar Tunnel, 5-1/2" (140 Mm) X 4'11" - 589103 - 239-589103F1
Tunnel only, fits 140TT Thrusters.
Lewmar Tunnel, 5-1/2" (140Mm) X 2'6" - 589101 - 239-589101F1
Tunnel only, fits 140TT Thrusters.
Lewmar Tunnel, 7-9/32" (185Mm) X 3'3" - 589301 - 239-589301F1
Tunnel only, fits 185TT Thrusters.
Lewmar Tunnel, 7-9/32" (185Mm) X 4'11" - 589302 - 239-589302F1
Tunnel only, fits 185TT Thrusters.
Lewmar Tunnel, 9-5/6" (250Mm) X 6'7" - 589503 - 239-589503F1
Tunnel only, fits 250TT Thrusters.
License Bracket - V440-09 - 177-V44009F1
Tough molded, flexible plastic material. Will not rust or corrode. Allows bracket and license plate to deflect on impact-returns to original position. Designed for use with all Anderson rear lights.
Lid F/Pt & Qt Mix N'Measure - 1000889 - 320-1000889 Superseded By: 320-41000F1
More economical than using conventional paper paint containers. Made of solvent resistant rugged plastic. Pre-marked so you can measure the exact amount of paint that you need. Lids sold separately.
Lido 2 Trim Evin/Johnson Suz - 65502P - 11-65502Pf1
Features include: Black graphics on a white face with chrome ring and a black pointer with fire-orange tip. Scratch resistant curved glass lense with polished stainless steel, near-flush bezel. white perimeter and red thru-dial lighting.
Lido Oil Press Fog Res 0-80Psi - 59653P - 11-59653Pf1
Fog resistant gauges comply with SAE J-1810. Black graphics on a white face with chrome ring and a black pointer with fire-orange tip. Scratch resistant curved glass lense with polished stainless steel, near-flush bezel. white perimeter and red thru-dial lighting.
Lift Off - Ds-Liftoff - 315-Liftofff1
Used to separate shrink wrap from the product it is covering. Using strapping, buckles and a tensioning tool the Liftoff offers simple protection. This separation promotes air circulation and is extremely important on painted hulls where shrink wrap touching paint can cause blistering. It is easily installed and re-usable.
