Select Category
General
Push Button Start Switch - Mp39320 - 11-Mp39320F1
Momentary ON-OFF SPSTFor starter, horn or other functions. Solid brass construction. 1-1/4" long, 5/8" diameter mounting stem. Overall length is 2-7/8"
Push Button Switch - 0701Dp - 9-0701Dpf1
Non-magnetic black plastic with weather resistant cover. 6" wire leads. 3/8" neck length, 3/8" neck diameter. Max. panel thickness: 1/8". Rated 10 amps at 12, 24 & 36 volts.
Push Button Switch - 8200-Bss - 661-8200F1
For applications such as starters, bilge pumps, horns, wipers and engine controls where switching, in addition to circuit protection is required. All panel switches mount in Blue-Sea A series breaker panels. Supplied with mounting adapter for standard 5/8" circuit breaker mounting hole. Nickel-plated brass and phenolic non-corrosive construction. White actuator. Rated 15A @ 32V DC or 125V AC, 10A @ 250V AC. 1/4" Tab terminals. On in parenthesis (On) indicates a momentary position.
Push Button Switch - M-639-Bx - 12-M639Bxf1
Normally ON. S.P.S.T. Two positions: On - momentary off. Off with button depressed. Spring return to on. 10A at 12VDC. Gasket sealed case protects against moisture and dirt. Chrome plated brass plunger. Two brass screw terminals. Mounting stem 5/8"-32 diameter, 1" long. Fits panels up to 3/4" thick.
Push Plug For 1-1/8", Bulk - Pp18 - 232-Pp118F1
These push in plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains. These plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal. They have double seal rings to assure positive sealing.
Pva Mold Release - 105685 - 75-105685F1
Used for curing Evercoat Premium Polyester Gel-Kote. Apply by spraying a light "mist coating" over the catalyzed Gel-Kote products. Allows a full cure at the surface and eliminates the tackiness.
Pvc Fabric Black Sport - 8M0156339 - 720-8M0156339F1
Pvc Fabric Black Sport Hd - 8M0159175 - 720-8M0159175F1
Pvc Fabric Dark Gry Alurib - 8M0148956 - 720-8M0148956F1
Pvc Fabric Drk Blue Airdeck - 8M0159173 - 720-8M0159173F1
Pvc Fabric Med Gry Sport - 8M0148957 - 720-8M0148957F1
Pvc Fabric Med Gry Sport - 8M0157009 - 720-8M0157009F1
Pvc Fabric Whit Tendy - 8M0157008 - 720-8M0157008F1
Pvc Fabric Wht Airdeck Alurib - 8M0156340 - 720-8M0156340F1
Pvc Fabric Wht Alurib - 8M0170210 - 720-8M0170210F1
Pwa Kit-Twin 1-Station W/Trim-Tilt - Pwa Mm21T - 216-Pwamm21Tf1
The easy to install PowerA Mark II™ control system provides fingertip operation of throttle and shift levers. Using reliable and precise digital data transmission, this single or dual function control system is specifically designed to work on mechanically controlled as well as electronic and electro-hydraulic gas and diesel inboards, sterndrives and outboards. Features include Dock Assist, RPM Synchronization, High Idle feature, programmable Trolling Valve Control and neutral Warm Up. Available with and without trim, the control has audible and visual interfaces which alert the operator to the current status of the control system. With the ability to control up to 4 engines from up to 4 different stations, the PowerA Mark II™ is a modular and flexible system with simple to install components.(1) 42012V - Control with trim (Item 1) (1) 42017F - Control Unit (Item 2) (4) 42027J - Actuators (Item 3, Item 4, Item 5, and Item 6) (1) 42026G - Power Unit (Item 7) (4) 73639T - 3' Network Cable (# 1, # 3, # 4, and # 5) (1) 71021K - 33' Network Cable (#2) (2) 42053K - 10' Power Cable (# 11 and # 12) (4) 42056S - 3' Actuator Power Cable (#7, #8, #9 and # 10) (1) 42028L - Network Terminator Kit (control head and last actuator)
