Select Category
General
Ram Short Double Socket Arm For 1" Balls - Ram-B-201U-A - 170-Ramb201Uaf1
The RAM-B-201U-A, short double socket arm, has a socket at both ends that accommodates 1" ball bases. RAM socket technology allows for almost infinite adjustment and perfect viewing angles.(This product does not include single spring) Dimensions: Overall Length: 2.38"Socket-To-Socket Length: 1.75"
Ram Single Swing Arm Horizontal Mount System - Ram-109H - 170-Ram109Hf1
The RAM single swing arm mount is made of powder coated marine grade aluminum. It consists of a 6" long BENT swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360° rotation.
Ram Single Swing Arm Vertical Mount System - Ram-109V - 170-Ram109Vf1
The RAM single swing arm mount is made of powder coated marine grade aluminum. It consists of a 6" long BENT swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360° rotation.
Ram Small Tough-Claw™ With 1.5" Diameter Rubber Ball - Rap-400U - 170-Rap400Uf1
The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Patent PendingClamping Range (Rail/Tube Surfaces): 0.625" to 1.5"Clamping Range (Flat Surfaces): 0" to 1.14"Physical Dimensions: Height: 4.81", Width: 1.18"
Ram Small Tough-Claw™ With 1" Diameter Rubber Ball - Rap-B-400U - 170-Rapb400Uf1
The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Patent PendingClamping Range (Rail/Tube Surfaces): 0.625" to 1.5"Clamping Range (Flat Surfaces): 0" to 1.14" Physical Dimensions:Height: 4.25", Width: 1.18"
Ram Standard Length Double Socket Arm For 1.5" Balls - Ram-201 - 170-Ram201F1
The RAM-201, standard length double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.Dimensions:Overall Length: 5.625"Socket-To-Socket Length: 4.5"
Ram Tough-Claw™ Mount With Level Cup™ Drink Holder - Ram-B-132-400U - 170-Ramb132400Uf1
Tough-Claw™ base and RAM Level Cup™ Self-Leveling Drink Holder. The drink cup holder has two pivot points, allowing for your drink to always stay upright and never spill. Mount rotates 360°. The integrated eyelet and hook provide an optional tethering function, securing any small or open container in any harsh environment. The RAM Tough-Claw™ is the perfect mounting base for quick and easy nstallation and removal on round, square, odd shaped rails and bars and flat surfaces. Easy installation in many applications including motorcycles, kayaks and boats, bicycles, wheelchairs and more. Compatible with any cups, cans, bottles or mugs ranging from 2.5" - 3.5" diameter. Koozie is included.Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14"
Ram Universal X-Grip® Large Phone/Phablet Cradle - Ram-Hol-Un10Bu - 170-Ramholun10Buf1
The RAM-HOL-UN10BU has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the X-Grip® IV is the phablet cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phablet and become the most useful accessory in your vehicle.The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.Cradle DimensionsMinimum Width = 1.75" (Minimum Height = 5.5")Maximum Width = 4.5" (Minimum Height = 3.25")Depth = 0.875"
Ram X-Grip® Phone Mount - Ram-Hol-Un7Bu - 170-Ramholun7Buf1
Sometimes, it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip® has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phone and become the most useful accessory in your vehicle.The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.Cradle DimensionsMinimum Width = 1.875" (Minimum Height = 4.25")Maximum Width = 3.25" (Minimum Height = 2.25")Depth = 0.875"
Ram-Rod® Hd Fishing Rod Holder - Rap-433-Bmp - 170-Rap433Bmpf1
Compatible with both spinning and casting reels, specifically designed for rugged environments and large fishing rods. It features a rotating ring to keep your rod in place and a swing arm rod stop that can convert it into a tube style rod holder. Compatible with the C-Size and B-Size hex ball bases. Includes a 6" spline post and bulkhead/flat surface mounting base. Also GoPro® compatible - just attach your GoPro factory mount directly to the rod holder or use the Double Ball Mount to attach any action camera. If you want to mount your phone to utilize your mobile fishfinder app, use the Double Ball Mount with X-Grip®.
Ram-Rod™ 2000 Fishing Rod Holder With Bulkhead Mounting Base - Ram-114-B - 170-Ram114Bf1
The RAM-114-B, high strength composite fishing rod holder with bulkhead base, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
Ram-Rod™ 2000 Fishing Rod Holder With Flush Mounting Base - Ram-114-F - 170-Ram114Ff1
The RAM-114-F, high strength composite fishing rod holder with flush base, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
Ram-Rod™ 2007 Fishing Rod Holder With Rectangle Flat Surface Base - Rap-340 - 170-Rap340F1
The RAM-ROD™ 2007 rod holder is one of the most popular rod holders for the kayak angler due to its simplicity and adjustability. Utilizing the RAM patented 1.5" ball, you can rotate and adjust the rod holder almost infinitely making this rod holder ideal for kayak fishing. The ball and socket enable fine adjustment without the need to loosen a knob which is ideal for making small adjustments as your fishing scenario changes throughout the day. Includes 1.5" ball with a 2" x 2.5" flat surface mounting base.
Ram-Rod™ 8" Post Extension Arm - Rap-114-Pau - 170-Rap114Pauf1
Get your fishing rod closer to you, closer to the action, or simply out of the way with this latest extension from RAM. Rugged, high strength composite construction ensures years of performance on the water. The rod holder extender will lift your RAM-ROD™ holder up off of your deck and enable ideal positioning in tight spaces such as on kayaks. This extender is perfect for increasing the rod holder height when using a side mounted gunnel or transom mount.
Ram® Ram101Lo11 1.5" Double Ball Mount For Select Lowrance Elite-5, Elite 7 Ti/Ti®, Hook & Mark-5 Fishfinders - Ram-101-Lo11 - 170-Ram101Lo11F1
The RAM-101-LO11 consists of a 2.5" diameter round base that contains the universal AMPS hole pattern double socket arm and adapter base that inserts directly to the back of Lowrance Elite-5, Elite-5 Ti, Elite-7 Ti/Ti®, HOOK-3, HOOK-4, HOOK-5 and MARK-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
Ram® Ram108 Trolling Motor Stabilizer, 5-1/2" Arm - Ram-108 - 170-Ram108F1
A single strap base attaches to your trolling motor shaft and connects to a standard double socket arm and a 2.5" diameter round base. Effectively eliminates vibration from your trolling motor, the stabilizer fits trolling motor shafts from 0.5" - 2" dia. Protects the shaft, mount, and head of your motor from damage. Ideal for anglers with bow-mounted trolling motors.
Ram® Ram108D Trolling Motor Stabilizer, 9" Arm - Ram-108-D - 170-Ram108Df1
A single strap base attaches to your trolling motor shaft and connects to a standard double socket arm and a 2.5" diameter round base. Effectively eliminates vibration from your trolling motor, the stabilizer fits trolling motor shafts from 0.5" - 2" dia. Protects the shaft, mount, and head of your motor from damage. Ideal for anglers with bow-mounted trolling motors.
Ram® Ramb101Lo11 1" Double Ball Mount For Lowrance Elite-4, Hook-4 & Mark-4 Fishfinders - Ram-B-101-Lo11 - 170-Ramb101Lo11F1
The RAM-B-101-LO11 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and adapter base that inserts directly to the back of Lowrance Elite-4, Mark-4 and Hook-4 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
Ramp Grip Glides Kit Of 22 - 13350 - 581-13350F1
Our grip glides allow you to utilize your trailer for snowmobile or ATV no matter the weather. This unique design features grips for ATV wheels and a glide pattern to suspend snowmobile wear bars for easy loading. Works on all types of trailers including tilt trailer, trailer w/ ramp or an enclosed trailer.
Ramp Grips Set 6/Pk - 13204 - 581-13204F1
Protect your ramp and Climb on with Ease! Excellent traction and braking control while loading or unloadingGives superior traction and protection from stud penetrationWraps right around your 1" Bars on any rampOne side can be cut for larger sizes Cross Bars15" length protects ramp from all Track widthsEach 6 piece kit comes with Stainless Steel Torque fasteners and driverFlexible, Strong and Guaranteed to last!Made in USA and includes Caliber's lifetime warranty
Rapid Clear Satin Wood Finish - Rcl750 - 331-Rcc750F1
One-part/component semi-gloss wood finish. Quick and easy wood protection. Provides an enhancing UV protecting film. For Interior and exterior wood above the waterline. It bonds extremely well to teak, preventing discoloration and emphasizes the natural grain. No sanding between coats. Application: brush, roll or spray.
Rapid Coat Tinted Wood Finish - Rc750 - 331-Rc750F1
One-part/component semi-gloss wood finish. Quick and easy wood protection. Provides an enhancing UV protecting film. For Interior and exterior wood above the waterline. It bonds extremely well to teak, preventing discoloration and emphasizes the natural grain. No sanding between coats. Application: brush, roll or spray.
Rapid-Set Marine-Tex™ - Rm320C - 185-Rm320Kf1
A convenient repair paste, one to one mix, for emergency or permanent repairs. Bonds to wood, steel, aluminum, fiberglass and many plastics. Waterproof. Cures in one hour at 72° F. Can be drilled, tapped and sanded.
