Select Category
General
Scandvik Flex Strip End Caps, Pr. - 41600 - 390-41600F1
End caps for flex trak.
Scandvik Folding Tap - 10180P - 390-10180Pf1
Compact ceramic cold water tap with a tall swiveling and folding spout for vertical or horizontal installation. Spout folds and swivels for minimum obtrusion when tucked away. Chrome plated brass. Water connection 3/8" BSP threaded shaft with 1/2" NPS-M Nylon adaptor included. Mounting hole 5/8". 1/4 turn ceramic valve.
Scandvik Folding Tap, Low Spout - 10183P - 390-10183Pf1
Compact ceramic cold water tap with a low swiveling and folding spout. Vertical or horizontal installation. The combination of it's low profile and short spout gives this tap the ability to be installed in locations you might not otherwise be able to fit a tap. Water connection 3/8" BSP threaded shaft with 1/2" NPS-M Nylon adaptor included. Chrome plated brass. Mounting hole 5/8". 1/4 turn ceramic valve.
Scandvik J Spout Folding Swiwel Cold Water Tap - 74125 - 390-74125F1
Made of durable, low maintenance passivated 304 stainless steel. This light weight cold water tap is perfect for installation on flybridge, bar or aft cockpit locations. Spout folds and swivels for horizontal or vertical installation. Water connection: 1/2" NPS-M. Material: passivated 304 stainless steel, brush finish. Mounting hole: 7/8".
Scandvik Pvc Tail Pipe, 1-1/2" X 5" - 10316P - 390-10316Pf1
5" Long, with 1-1/2" female threaded connection & 1-1/2" outlet.
Scandvik Pvc Tail Pipe, 1-1/4" X 4-1/4" - 10303P - 390-10303Pf1
4-1/4" Long, with 1-1/4" female threaded connection & 1-1/4" outlet.
Scandvik Recessed Euro Sprayer Shower - 12133P - 390-12133Pf1
Stainless steel recessed shower used in vertical or horizontal installations. Manufactured from passivated 316 stainless steel, our cap design will add a touch of elegance to your boat. The friction lock hinge holds the cap open. Water connection: 3/8" BSP-F fitting, 1/2" NPS adaptor available. Material: 316 stainless steel cap, 6' white nylon hose and white composite cup. Mounting hole: 2-3/4".
Scandvik Recessed Push Button Shower - 12131P - 390-12131Pf1
Stainless steel recessed shower used in vertical or horizontal installations. Manufactured from passivated 316 stainless steel, our cap design will add a touch of elegance to your boat. The friction lock hinge holds the cap open. Water connection: 3/8" BSP-F fitting, 1/2" NPS adaptor available. Material: 316 stainless steel cap, 6' white nylon hose and white composite cup. Mounting hole: 2-3/4".
Scandvik Sink Drain, Chrome Plated Brass W/Flip Stopper - 19004P - 390-19004Pf1
Fits 1-7/8" drain hole.
Scandvik Sink Drain, Chrome Plated Brass W/Flip Stopper - 19006P - 390-19006Pf1
Fits 1-5/8" drain hole.
Scanstrut Apt15001 6" Aluminum Powertower®, White - Apt-150-01 - 922-Apt15001F1
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.Antenna fastens to PowerTower using own mounting bolts.Pre-drilled mounting holes for easy installation.Internal cable managementWatertight base seal included; no need for messy sealantWhite powder coated25° Aft leaningInternally mounted cable seal
Scanstrut Apt15001Blk 6" Aluminum Powertower®, Black - Apt-150-01-Blk - 922-Apt15001Blkf1
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.Antenna fastens to PowerTower using own mounting bolts.Pre-drilled mounting holes for easy installation.Internal cable managementWatertight base seal included; no need for messy sealantWhite powder coated25° Aft leaningInternally mounted cable seal
Scanstrut Apt150Sl01 Starlink Aluminium Powertower, White - Apt-150-Sl-01 - 922-Apt150Sl01F1
Install your Starlink with precision on the roof, T-top, flybridge, or radar arch of your powerboat. It guarantees obstacle clearance and positions your Starlink at an ideal 8° angle for optimal connectivity. Designed for the harsh marine environment, it's tailored to fit Starlink High-Performance. Pre-drilled mounting holes allow secure fastening directly to the tower, while the built-in Scanstrut Cable Seal ensures a watertight installation, eliminating the need to remove Starlink connectors during installation. The paint finishes adhere to our exclusive 4-step marine paint system, and it's crafted from premium marine-grade aluminium. No need to cut the cable connectors off for installation? Mounting gasket included. Marine sealant not requiredOverall Height 9.38". Tower (6" H) with wedge
Scanstrut Apt150Sl01Blk Starlink Aluminium Powertower, Black - Apt-150-Sl-01-Blk - 922-Apt150Sl01Blkf1
Install your Starlink with precision on the roof, T-top, flybridge, or radar arch of your powerboat. It guarantees obstacle clearance and positions your Starlink at an ideal 8° angle for optimal connectivity. Designed for the harsh marine environment, it's tailored to fit Starlink High-Performance. Pre-drilled mounting holes allow secure fastening directly to the tower, while the built-in Scanstrut Cable Seal ensures a watertight installation, eliminating the need to remove Starlink connectors during installation. The paint finishes adhere to our exclusive 4-step marine paint system, and it's crafted from premium marine-grade aluminum. No need to cut the cable connectors off for installation?.Mounting gasket included. Marine sealant not required. Overall Height 9.38". Tower (6" H) with wedge
Scanstrut Apt25001 10" Aluminum Powertower®, White - Apt-250-01 - 922-Apt25001F1
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.Antenna fastens to PowerTower using own mounting bolts.Pre-drilled mounting holes for easy installation.Internal cable managementWatertight base seal included; no need for messy sealantWhite powder coated25° Aft leaningInternally mounted cable seal
Scanstrut Apt25001Blk 10" Aluminum Powertower®, Black - Apt-250-01-Blk - 922-Apt25001Blkf1
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.Antenna fastens to PowerTower using own mounting bolts.Pre-drilled mounting holes for easy installation.Internal cable managementWatertight base seal included; no need for messy sealantWhite powder coated25° Aft leaningInternally mounted cable seal
Scanstrut Aptf15001 6" Aluminum Powertower®, White - Apt-F-150-01 - 922-Aptf15001F1
Install your antenna on the cabin roof, flybridge or radar arch of your powerboat.Antenna fastens to PowerTower using own mounting bolts.Pre-drilled mounting holes for easy installation.Internal cable managementWatertight base seal included; no need for messy sealantWhite powder coated25° Aft leaningInternally mounted cable seal
Scanstrut Compact Deck Pod - Up To 9" Displays (Slim Back) - White - Spd-8-W - 922-Spd8Wf1
Solve the challenge of finding a level mounting surface to install your displays onto your boat.Fully Adjustable - Easy-to-release lever can be operated with one handSwivel the pod, tilt to your requirements, then lock back into positionOptimum Viewing AngleAn adjustable ball joint allows a range of movement and multiple mounting anglesAdded StrengthAn inner bracing plate secures the Deck Pod base to the Pod and adds rigidity to the assemblyAlso eliminates potential damage from shock and vibration
Scanstrut Deck Pod - 12" Displays (Slim Back) - White - Spd-12-W - 922-Spd12Wf1
Solve the challenge of finding a level mounting surface to install your displays onto your boat.Fully Adjustable - Easy-to-release lever can be operated with one handSwivel the pod, tilt to your requirements, then lock back into positionOptimum Viewing AngleAn adjustable ball joint allows a range of movement and multiple mounting anglesAdded StrengthAn inner bracing plate secures the Deck Pod base to the Pod and adds rigidity to the assemblyAlso eliminates potential damage from shock and vibration
Scanstrut Extension 6M F/Lmb Pmg - Lmb-Extshort - 922-Lmbextshortf1
Scanstrut Mast Mount - M92722 - 922-M92722F1
The original and first choice for boat owners around the world, Scanstrut Mast Mounts are a cost-effective and space-saving solution for installing your radome or satcom antenna. Larger mounting foot is stronger, stiffer and now easier to fit than ever. Universal Mounting - attaches to the mast with four swivel feet, matching a variety of mast profilesSafety wire kit - independently attaches scanner to mastStrong Fixing - 12 point fixing using high quality monel rivetsCompact mounting - antenna extends only minimum distance from the front of the mast See www.scanstrut.com for the most current Radome & Satcom Compatibility
Scanstrut Mast Mount - Sc12 - 922-Sc12F1
The original and first choice for boat owners around the world, Scanstrut Mast Mounts are a cost-effective and space-saving solution for installing your radome or satcom antenna. Larger mounting foot is stronger, stiffer and now easier to fit than ever. Universal Mounting - attaches to the mast with four swivel feet, matching a variety of mast profilesSafety wire kit - independently attaches scanner to mastStrong Fixing - 12 point fixing using high quality monel rivetsCompact mounting - antenna extends only minimum distance from the front of the mast See www.scanstrut.com for Radome & Satcom Compatibility
Scanstrut Mast Mount - Sc20 - 922-Sc20F1
The original and first choice for boat owners around the world, Scanstrut Mast Mounts are a cost-effective and space-saving solution for installing your radome or satcom antenna. Larger mounting foot is stronger, stiffer and now easier to fit than ever. Universal Mounting - attaches to the mast with four swivel feet, matching a variety of mast profilesSafety wire kit - independently attaches scanner to mastStrong Fixing - 12 point fixing using high quality monel rivetsCompact mounting - antenna extends only minimum distance from the front of the mast See www.scanstrut.com for Radome & Satcom Compatibility
Scanstrut Mt Radar Pole Pmg - Sc101 - 922-Sc101F1
Totally universal, the SC100 Pole Mount installs your radar or satcom antenna onto the deck or transom of your boat. Supplied as a complete kit, you will have everything you need for a quick and easy installation. 360° Adjustable anodized aluminum base enables pole to be installed on both sloping transoms and level decksUnique pole extrusion accommodates two cable channels with a cover strip to hold cables in place and out of viewSupplied with two support modules which provide maximum fore / aft and sideways supportEasily removable for storageMarine grade 6082 Aluminum pole with a polyester powder coat for a durable and gloss white finish
