Canvas & Covers
Taylor 2020000308 Sureshade Power Bimini, Navy W/Black Anodized Frame - - 32-2020000308 Superseded By: 239-2024050707F1
Upgrade your pontoon boat's bimini shade with the SureShade® Power Bimini. This innovative shade solution takes the hassle out of manually setting up and adjusting your pontoon boat's top. With the flip of a switch, you can deploy it effortlessly. Rechargeable Battery Powered Bimini is powered by one 20V (2.0Ah) rechargeable Lithium-Ion battery that provides 30 open and close cycles on a single two-hour charge and stays charged for up to 40 days while not in use. The kit comes with a battery charger and two 20V batteries, keep one on the charge and swap out if needed. No need to run wires through the frame as the receiver is installed directly onto the boat deck next to the helm rail. It can be controlled with the touch switch installed on the helm rail or from anywhere on the boat with the SureShade Connect app. Adjust bimini top with the flip of switchMarine-grade, fade-resistant canvasTelescopic frame fits 92-102" wide boats and mounts to any pontoon rail system10' long canvas provides 30% more coverage than standard bimini topsIncludes locking, zippered pockets for easy canvas storageAllows for speeds up to 25mphCompatible with the Speed Top and Bimini Extension1 year waranty
Taylor 2021013518 Speed Top For Sureshade® Bimini, 8-1/2' X 10', Black - 2021013518 - 239-2021013518F1
SureShade has combined the convenience of a power bimini with speed. You can now have the throttle down and this bimini will stay in place up to 55 mph. No worries about collecting the wind and shaking the bimini frame! Breathable Black Mesh NylonFits SureShade Power Bimini FrameEasy to InstallBimini can tolerate speeds up to 55 mphNylon material keeps cool and doesn't hold the heat of canvas bimini topsPatent Pending
Taylor 2021013744 Bimini Extension For Sureshade® Power Bimini , 92" W X 91"L Extended, Black - 2021013744 - 239-2021013744F1
This extension bimini gives you additional shade in the bow of the boat that is not covered by traditional biminis. The extension bimini easily stores in the SureShade Power Bimini zippered compartment. Additional coverage at the front of the boat where there's more exposureKit includes bimini shade, four stanchion poles and mounting hardwareExtension bimini is easily stored in the zippered boot of the power bimini when not in useMade with 70D ripstop nylon that has a poly coating on one side and a durable water repellent on the top making it waterproofBimini extension to be used only when docked or anchoredEasy installationMeasures 92" W x 91"L fully extended Bimini extension to be used only when docked or anchored
Taylor 55745 Pontoon Boat Cover Support System - 55745 - 32-55745F1
Extend the life of your pontoon boat cover by preventing water pooling. Easily installed system includes two adjustable bright dip anodized support poles with snap ends. Poles adjust from 27"-50". Also includes 60' of 1" polypropylene webbing, quick release adjuster buckles and four injection molded hooks to secure to decking.
Taylor Boat Cover Support Pole Base Pad (Pole Not Included) - 11976 - 32-11976F1
This new base is designed for use with all 7/8" diameter (bottom pole) support poles. The bottom pad is made from EPDM to provide additional friction to hold pole in place against the deck versus the traditional crutch tip design. In addition, the base pad has a swivel capability that allows the pole to be positioned at just the right angle for your application. Simply remove the bottom tip from your existing support pole and insert over adapter to secure. (Pole not included)
Taylor Boat Cover Support System Includes 50' Webbing, Quick Release Buckles And A Boat Cover Support Pole - 55741 - 32-55741F1
Helps extend the life of your boat cover by preventing water from pocketing. Includes 50' of webbing, quick release buckles, a boat cover support pole that snaps to the webbing, and two hooks to attach to the transom.
Taylor Boat Vent Ii Boat Cover Venting And Support - 11982 - 32-11982F1
Don't let your interior suffer from mold and mildew damage. Proper ventilation can keep these boat destroying fungi from attacking your boat! Installs quickly and easily, with no screws or fasteners. The venting area provides for greater volume of exhaust air while closing the top to bottom gap - keeping water out! The Boat Vent II is manufactured from a superior grade poly carbonate blend material for strength and UV resistance and will accommodate either 3/4" or 7/8" support poles.
Taylor Fixed Bimini Support Poles (2 Per Pack) 40" Long - 11989 - 32-11989F1
Keep your bimini top off the gunwales with a pair of bimini support poles. These poles replace your rear straps and keep your top "up and out of the way." Two jaw slides (7/8") and deck hinge are included. 1 Pair per card. Note:These poles should never be used to replace the front support straps. Only the rear straps should be replaced with adjustable support poles. Do not exceed 35 miles per hour while using Bimini top support poles.
Taylor Hot Shot Universal T-Top Center Console Cover 48" W X 60" L X 66" H - 67852Ob - 32-67852Obf1
Trailerable T-Top console cover is secured to the underside of the fixed T-Top structure and will enclose any size console, helm seat and T-top support combination with a maximum base perimeter (at the deck) of 18' or less. 48" W x 60" L x 66" H.
Taylor Hot Shot Universal T-Top Center Console Cover 48" W X 60" L X 66" H - 67852Og - 32-67852Ogf1
Trailerable T-Top console cover is secured to the underside of the fixed T-Top structure and will enclose any size console, helm seat and T-top support combination with a maximum base perimeter (at the deck) of 18' or less. 48" W x 60" L x 66" H.
Taylor Orange Fiberglass Bow With Rubber End Covers 1-1/4" Wide - 924 - 32-924F1
Super strong and flexible fiberglass bows will not take a "set" and can be cut to any desired length. Includes a rubber end cover to grab socket.
Taylor Orange Fiberglass Bow With Rubber End Covers 1-1/4" Wide - 925 - 32-925F1
Super strong and flexible fiberglass bows will not take a "set" and can be cut to any desired length. Includes a rubber end cover to grab socket.
Taylor Orange Fiberglass Bow With Rubber End Covers 1-1/4" Wide - 926 - 32-926F1
Super strong and flexible fiberglass bows will not take a "set" and can be cut to any desired length. Includes a rubber end cover to grab socket.
Taylor Ptxss57Bk Sureshade Ptx Power Shade, 5' L X 57" W, Black - - 32-Ptxss57Bkf1
The SureShade PTX Power Shade is a power driven shade system that can be easily installed on any boat under 26' with T-top tube or hardtop. The system deploys a shade 5' in 28 seconds and consists of two actuators powered by individual 12V DC motors. Universal design and slim 1-3/8" diameterOperates silently with an included rocker switch and requires no programmingDesigned with anti-racking and auto shut offStainless steel framework
Taylor Ptxss57Gy Sureshade Ptx Power Shade, 5' L X 57" W, Gray - - 32-Ptxss57Gyf1
The SureShade PTX Power Shade is a power driven shade system that can be easily installed on any boat under 26' with T-top tube or hardtop. The system deploys a shade 5' in 28 seconds and consists of two actuators powered by individual 12V DC motors. Universal design and slim 1-3/8" diameterOperates silently with an included rocker switch and requires no programmingDesigned with anti-racking and auto shut offStainless steel framework
Taylor Rubber Spreader Boots - White (Sold In Pairs) - 960025 - 32-960025F1
Fits quickly and easily over the stay and spreader end. Constructed from soft yet tough white synthetic rubber. Protects the rigging connections. Eliminates clumsy temporary taping. Reduces drag. Reduces sail chafing and tearing. Molded in split form.
Taylor Rubber Spreader Boots - White (Sold In Pairs) - 960026 - 32-960026F1
Fits quickly and easily over the stay and spreader end. Constructed from soft yet tough white synthetic rubber. Protects the rigging connections. Eliminates clumsy temporary taping. Reduces drag. Reduces sail chafing and tearing. Molded in split form.
Taylor Rubber Spreader Boots - White (Sold In Pairs) - 960027 - 32-960027F1
Fits quickly and easily over the stay and spreader end. Constructed from soft yet tough white synthetic rubber. Protects the rigging connections. Eliminates clumsy temporary taping. Reduces drag. Reduces sail chafing and tearing. Molded in split form.
Taylor Square Sail Shade Mounting Hardware - 12023 - 32-12023F1
Includes: 4 Sets of turnbuckles, pad eyes and carabiner hooks.
Taylor Square Sail Shade, 16'5" - 12019 - 32-12019F1
Perfect for your yacht, backyard, pool, patio, picnic area, anywhere shade is needed! Long-lasting knitted polyethylene fabric allows rain to pass through so no pooling water can occurBreathable Shade allows refreshing breezes to flow through while reducing temperatures underneath by up to 30%Stylish and versatile protection from up to 90% of harmful UV raysHeavy duty stainless steel D-ringsMounting hardware sold separately
Taylor Triangular Sail Shade, 12' - 12022 - 32-12022F1
Perfect for your yacht, backyard, pool, patio, picnic area, anywhere shade is needed! Long-lasting knitted polyethylene fabric allows rain to pass through so no pooling water can occurBreathable Shade allows refreshing breezes to flow through while reducing temperatures underneath by up to 30%Stylish and versatile protection from up to 90% of harmful UV raysHeavy duty stainless steel D-ringsMounting hardware sold separately
Taylor Triangular Sail Shade, 16'5",Perfect For Your Yacht - 12021 - 32-12021F1
Perfect for your yacht, backyard, pool, patio, picnic area, anywhere shade is needed!Long-lasting knitted polyethylene fabric allows rain to pass through so no pooling water can occurBreathable Shade allows refreshing breezes to flow through while reducing temperatures underneath by up to 30%Stylish and versatile protection from up to 90% of harmful UV raysHeavy duty stainless steel D-ringsMounting hardware sold separately
Twin Paks™ Roller Cover - R-900-9 - 130-R9009F1
Polyester fabric. Cardboard core. One time use.
