Select Category
Hardware & Deck
Taylor Chafe Guards For 1/2" To 5/8" Lines - White (Sold In Pairs) - 96013 - 32-96013F1
Abrasion-resistant rubber. Slides through chocks to protect your lines.
Taylor Boat Vent Ii Boat Cover Venting And Support - 11982 - 32-11982F1
Don't let your interior suffer from mold and mildew damage. Proper ventilation can keep these boat destroying fungi from attacking your boat! Installs quickly and easily, with no screws or fasteners. The venting area provides for greater volume of exhaust air while closing the top to bottom gap - keeping water out! The Boat Vent II is manufactured from a superior grade poly carbonate blend material for strength and UV resistance and will accommodate either 3/4" or 7/8" support poles.
Taylor Boat Cover Support System Includes 50' Webbing, Quick Release Buckles And A Boat Cover Support Pole - 55741 - 32-55741F1
Helps extend the life of your boat cover by preventing water from pocketing. Includes 50' of webbing, quick release buckles, a boat cover support pole that snaps to the webbing, and two hooks to attach to the transom.
Taylor Boat Cover Support Pole Base Pad (Pole Not Included) - 11976 - 32-11976F1
This new base is designed for use with all 7/8" diameter (bottom pole) support poles. The bottom pad is made from EPDM to provide additional friction to hold pole in place against the deck versus the traditional crutch tip design. In addition, the base pad has a swivel capability that allows the pole to be positioned at just the right angle for your application. Simply remove the bottom tip from your existing support pole and insert over adapter to secure. (Pole not included)
Taylor Boat Cover Snap Fasteners - 404 - 32-404F1
Standard snap-on, snap-off design. Snaps on and off in any direction.
Taylor Boat Cover Snap Fasteners - 403 - 32-403F1
Standard snap-on, snap-off design. Snaps on and off in any direction.
Taylor Boat Cover Snap Fasteners - 402 - 32-402F1
Standard snap-on, snap-off design. Snaps on and off in any direction.
Taylor Boat Cover Snap Fasteners - 401 - 32-401F1
Standard snap-on, snap-off design. Snaps on and off in any direction.
Taylor Black Thermoplastic Turn Latches With Self-Tapping Screws (2 Per Pack) - 1162 - 32-1162F1
Simple twist latch for walk-thru windshields or other hatch openings. Black thermoplastic with self-tap screws.
Taylor Black Thermoplastic Door Catches With Ball Stud, Catch And Screws (1 Set) - 1163 - 32-1163F1
For walk-thru windshields and other doors. Catch holds door firmly in place against vibration and motion. Constructed of black thermoplastic consisting of ball stud, catch and screws.
Taylor Bimini Hinge Thumb Screw With 1/4" X 1" Threads (Sold As Pair) - 11736 - 32-11736F1
Designed as a replacement for holding screws on stainless and zamak bimini deck hinges.
Taylor Anchorshade Iii With Powder Coated Aluminum Frame And 4-Point Height Adjuster 6' X 6' Includes Carrying Case - 32-22049 - 32-22049F1
This uniquely designed 6' x 6' square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Taylor Anchorshade Iii With Powder Coated Aluminum Frame And 4-Point Height Adjuster 6' X 6' Includes Carrying Case - 22057 - 32-22057F1
This uniquely designed 6' x 6' square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Taylor Anchorshade Iii With Powder Coated Aluminum Frame And 4-Point Height Adjuster 6' X 6' Includes Carrying Case - 22048 - 32-22048F1
This uniquely designed 6' x 6' square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Taylor Anchorshade Iii With Powder Coated Aluminum Frame And 4-Point Height Adjuster 6' X 6' Includes Carrying Case - 22047 - 32-22047F1
This uniquely designed 6' x 6' square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Taylor Anchorshade Iii With Powder Coated Aluminum Frame And 4-Point Height Adjuster 6' X 6' Includes Carrying Case - 22046 - 32-22046F1
This uniquely designed 6' x 6' square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Taylor Anchorshade Iii With Powder Coated Aluminum Frame And 4-Point Height Adjuster 6' X 6' Includes Carrying Case - 22044 - 32-22044F1
This uniquely designed 6' x 6' square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Taylor Anchorshade Iii With Powder Coated Aluminum Frame And 4-Point Height Adjuster 6' X 6' Includes Carrying Case - 22043 - 32-22043F1
This uniquely designed 6' x 6' square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Taylor Anchorshade Iii With Powder Coated Aluminum Frame And 4-Point Height Adjuster 6' X 6' Includes Carrying Case - 22042 - 32-22042F1
This uniquely designed 6' x 6' square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Taylor Aluminum Adjustable Boat Cover Support Pole 36 To 64" - 11991 - 32-11991F1
Extend the life of your boat cover by preventing water from pooling on top. Includes a non-marring tip on each end of the telescoping aluminum pole and a durable plastic adjustment knob for easy height adjustment.
Taylor Adjustable Side Vent Handles For 1/4" Mounting Hole (Sold As Pair - Left & Right) - 11616 - 32-11616F1
Designed to replace most original handles on side vent windows with 1/4" mounting holes. Easy installation. Sold in pairs - left & right.
Taylor Adjustable Bimini Support Poles (2) 28 To 48" With 7/8" Jaw Slides (2) And Deck Hinge - 11995 - 32-11995F1
Keep your bimini top off the gunwales with a pair of bimini support poles. These poles replace your rear straps and keep your top "up and out of the way." Two jaw slides (7/8") and deck hinge are included. 1 Pair per card. Note:These poles should never be used to replace the front support straps. Only the rear straps should be replaced with adjustable support poles. Do not exceed 35 miles per hour while using adjustable Bimini top support poles.
Taylor Acrylic Dock Wheel Covers, 18" Black - 5301B - 32-5301Bf1
Specifically designed to fit over our Dock Pro Inflatable dock wheels. Constructed from 100% heavy duty loop knit acrylic. Covers are UV, abrasion and stain resistant and will help prevent grime and dirt on your dock wheel. Heavy duty sewn-in draw string and barrel lock ensures a custom fit.
Taylor Acrylic Dock Wheel Covers, 12" Navy - 5300N - 32-5300Nf1
Specifically designed to fit over our Dock Pro Inflatable dock wheels. Constructed from 100% heavy duty loop knit acrylic. Covers are UV, abrasion and stain resistant and will help prevent grime and dirt on your dock wheel. Heavy duty sewn-in draw string and barrel lock ensures a custom fit.
Taylor Acrylic Dock Wheel Covers, 12" Black - 5300B - 32-5300Bf1
Specifically designed to fit over our Dock Pro Inflatable dock wheels. Constructed from 100% heavy duty loop knit acrylic. Covers are UV, abrasion and stain resistant and will help prevent grime and dirt on your dock wheel. Heavy duty sewn-in draw string and barrel lock ensures a custom fit.
