Select Category
Hardware & Deck
Seadog 3361551 Smooth Finish Quarter-Turn Deck Plate, Black, , A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336155-1 - 354-3361551F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361521 Smooth Finish Quarter-Turn Deck Plate, White, , A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336152-1 - 354-3361521F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361501 Smooth Finish Quarter-Turn Deck Plate, White,, A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336150-1 - 354-3361501F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361401, Smooth Finish Quarter-Turn Deck Plate,White,, A:4-1/2" , B:6-1/8", C:4-1/2", D:5-3/8 - 336140-1 - 354-3361401F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 335680 Adjustable Bronze Deck Plate Key - 6" Max Opening - 335680-1 - 354-3356801F1
Opens to a max of 6" and comes with two sizes of stainless steel pins 3/16" and 5/16" allowing it to fit most plates or caps. Satin finished bronze. Heavy duty constructionGreat addition to every tool boxCorrosion resistant
Seadog 3314101 Louvered Vent, 9" H X 5" W - 331410-1 - 354-3314101F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 3314001 Louvered Vent, 9-1/8" H X 4-5/8" W - 331400-1 - 354-3314001F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 3313901 Louvered Vent, 5" H X 4-5/8" W - 331390-1 - 354-3313901F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 3313801 Louvered Vent, 2-5/8" H X 5" W - 331380-1 - 354-3313801F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 328112 Adjustable 17" Bow Form Flagpole - 328112-1 - 354-3281121F1
Highly polished, heavy wall stainless steel tubing with injection molded nylon and polypropylene fittings. The flag is attached to the flag pole using nylon adjustable flag pole clips in conjunction with stainless steel spring wire quick release clips allowing mounting flexibility for a variety of flag or pennant sizes. Maximum safe speed 10 MPH.
Seadog 328079 Large Anchor Bow Roller 328074 Replacement Wheel - 5 Pieces Per Pack - 328079-1 - 354-3280791F1
Replacement wheel for large anchor bow roller.
Seadog 328076 Large Platform Bow Roller | 1-1/2" Max Rope Diameter | 3/8" Bolt Fastener - 328076 - 354-328076F1
These corrosion resistant stamped 304 stainless steel Large Platform Bow Rollers are designed to handle most fluke style anchors and mount in or under the anchor slot of a platform or bow plank. The rubber wheel accommodates rope up to 1-1/2" in diameter. Installs with six 3/8" bolts (not included).
Seadog 328074 Large Anchor Bow Roller | 1-1/2" Max Rope Diameter - 328074 - 354-328074F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1-1/2" in diameter. Installs with 3/8" bolts (not included).
Seadog 328068 Pivoting Medium Bow Roller | 1-1/2" Max Rope Diameter | 3/8" Bolt Fastener - 328068 - 354-328068F1
These corrosion resistant stamped 304 stainless steel Pivoting Medium Bow Rollers are designed to create a self-launching anchor system. As the anchor line is played out, the anchor roller pivots downward under the weight of the anchor, allowing it to fall freely into the water. The rubber wheel accommodates rope up to 1-1/2" in diameter. Installs with 3/8" bolts (not included).
Seadog 328064 Unpolished Medium Anchor Bow Roller | 1-1/2" Max Rope Diameter | 3/8" Bolt Fastener - 328064 - 354-328064F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1-1/2" in diameter. Installs with 3/8" bolts (not included).
Seadog 328057 Medium Fairlead Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328057 - 354-328057F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1" in diameter. Installs with 3/8" bolts (not included).
Seadog 328054 Unpolished Seahook Style Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328054 - 354-328054F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1" in diameter. Installs with 3/8" bolts (not included).
Seadog 328053 Unpolished Long Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328053 - 354-328053F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1" in diameter. Installs with 3/8" bolts (not included).
Seadog 328052 Unpolished Short Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328052 - 354-328052F1
These corrosion resistant stamped 304 stainless steel Short Bow Rollers make dropping and weighing anchor a breeze. Easy to use, it reduces the risk of damage to the hull or deck. The rubber wheel accommodates rope up to 1" in diameter. Installs with three 3/8" bolts (not included).
Seadog 328051 Platform Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328051 - 354-328051F1
These corrosion resistant stamped 304 stainless steel Platform Bow Rollers are designed to handle most fluke style anchors using a variety of platform or bowsprit mounting options. The flanges hold the flukes of the anchor securely, reducing the risk of damage to the hull. The rubber wheel accommodates rope up to 1" in diameter. Installs with four 3/8" bolts (not included).
Seadog 327175 Rail Mount 9" Rod Holder | Fits 7/8" To 1" Tubing - 327175-1 - 354-3271751F1
Rail mount 9" rod holder designed with a front mount adjustment screw. Allows for easy adjustment without having to disassemble the rail mount brackets. A safety line on the rod and or reel is recommended when using rail mount rod holders.
Seadog 327130 Rail Mount Ring Buoy Bracket - Fits 7/8" Or 1" Tubing Or Direct Mount - 327130-1 - 354-3271301F1
The Sea-Dog® Rail Mount Ring Buoy Bracket can be used on 7/8" or 1" tubing or mounted directly to a flat surface. Comes complete with all necessary hardware. Made from marine grade stamped aluminum and powder coated for a long-lasting finish.
Seadog 3265853 Fillet & Prep Table - 326585-3 - 354-3265853F1
Solid one piece construction for long lifeUV stabilized high-density polyethylene
Seadog 3254251 Triple Threat™ Rod Holder - Track Mount W/ Extension, Black - 325425-1 - 354-3254251F1
The Triple Threat™ Rod Holder is your one stop for all your reel styles: Spin, bait, cast, or fly. The addition of our 6" extension gives you more room in the cockpit and clearance for pedal drives. The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist. The rear bail facilitates vertical storage of rods while moving from one location to another. Attachment points on the base give you a solid clip point for leashing your rod and reel while paddling in rough conditions. This rod holder is supplied with a track mount base that is designed to attach to all popular brands of track. Constructed of injection molded glass filled nylon. The rod holder is interchangeable with either surface mount or track mount bases.
Seadog 3254161 Triple Threat™ Rod Holder - Track Mount, Black - 325416-1 - 354-3254161F1
The Triple Threat™ Rod Holder is your one stop for all your reel styles: Spin, bait cast, or fly. The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist. The rear bail facilitates vertical storage of rods while moving from one location to another. Attachment points on the base give you a solid clip point for leashing your rod and reel while paddling in rough conditions. This rod holder is supplied with a track mount base that is designed to attach to all popular brands of track. The rod holder is interchangeable with either surface mount or track mount bases. Constructed of injection molded glass filled nylon.
